Investigation of the shear properties of 3D printed short carbon fiber-reinforced thermoplastic composites

Short fiber-reinforced 3D printed components are high performance materials with a wide range of potential applications in various industries ranging from aerospace to automotive. Mechanical characterization of 3D printed short carbon fiber polyethylene terephthalate and acrylonitrile butadiene styrene parts are presented under the application of shear load in this study. The anisotropy properties of both composite and polymer materials were investigated by printing samples at two different orientations, using fused deposition modeling (FDM) technique. The fabricated samples were subjected to tensile and shearing loads while 2D digital image correlation (DIC) was used to measure full-field strain on the specimen. The obtained results revealed a noticeable anisotropy in shear properties as the function of printing orientation. Moreover, it found that using carbon fiber-reinforced PET results in higher elastic modulus, tensile, and shear strengths up to 180%, 230%, and 40% compared to ABS.

Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies

An approach to the experimental and computational study of the shear properties of honeycomb cores (HC) produced using Fused Deposition Modeling (FDM) technology is proposed. The experimental approach is based on a new sample type for testing HCs for shear. This sample contains two HCs and three steel plates. Shear tests are carried out in the TiraTest 2300 universal tensile testing machine. The HCs are made of ULTEM 9085 and PLA with FDM technology, which is implemented in the 3D Fortus 900 system. The tests resulted in obtaining the shear properties of the HCs by averaging the stress-strain curves of five samples. As follows from the analysis of the experimental results, brittle destruction of an HC is observed. Before its destruction, the value of shear deformation for samples made of PLA was 0.0134, and for samples made of ULTEM, 0.0257. The experimental analysis was accompanied by numerical finite element (FE) modeling of shear experiments, taking into account the deformation of the equipment. With the FE modeling of the experiments, to describe the behavior of the samples, it is necessary to take into account the influence, on the measurements of the shear properties, of the equipment and the deformation of each honeycomb cell. The deformation of three plates was taken into account; the elastic properties of the adhesive joint were not taken into account. A computer model of the deformation of the HCs with equipment was built using ANSYS Design Modeler. With FE modeling, only the elastic behavior of the HCs was considered.

Effects of Isothermal Aging on Interfacial Microstructure and Shear Properties of Sn-4.5Sb-3.5Bi-0.1Ag Soldering with ENIG and ENEPIG Substrates

Sn–Sb system solders and ENIG/ENEPIG surface finish layers are commonly used in electronic products. To illustrate the thermal reliability evaluation of such solder joints, we studied the interfacial microstructure and shear properties of Sn-4.5Sb-3.5Bi-0.1Ag/ENIG and Sn-4.5Sb-3.5Bi-0.1Ag/ENEPIG solder joints after aging at 150 °C for 250, 500 and 1000 h. The results show that the intermetallic compound of Sn-4.5Sb-3.5Bi-0.1Ag/ENIG interface was more continuous and uniform compared with that of Sn-4.5Sb-3.5Bi-0.1Ag/ENEPIG interface after reflow. The thickness of the interfacial intermetallic compounds of the former was significantly thinner than that of the latter before and after aging. With extension of aging time, the former interface was stable, while obvious voids appeared at the interface of the latter after 500 h aging and significant fracture occurred after 1000 h aging. The shear tests proved that shear strength of solder joints decreased with increasing aging time. For the Sn-4.5Sb-3.5Bi-0.1Ag/ENEPIG joint after 1000 h aging, the fracture mode is ductile-brittle mixed type, which means fracture could occur at the solder matrix or the solder/IMC interface. For other samples of these two types of joints, ductile fracture occurred inside of the solder. The Sn-4.5Sb-3.5Bi-0.1Ag/ENIG solder joint was thermally more reliable than Sn-4.5Sb-3.5Bi-0.1Ag/ENEPIG.

Shear Properties of Earth's Inner Core

Understanding how Earth's inner core (IC) develops and evolves, including fine details of its structure and energy exchange across the boundary with the liquid outer core, helps us constrain its age, relationship with the planetary differentiation, and other significant global events throughout Earth's history, as well as the changing magnetic field. Since its discovery in 1936 and the solidity hypothesis in 1940, Earth's IC has never ceased to inspire geoscientists. However, while there are many seismological observations of compressional waves and normal modes sensitive to the IC's compressional and shear structure, the shear waves that provide direct evidence for the IC's solidity have remained elusive and have been reported in only a few publications. Further advances in the emerging correlation-wavefield paradigm, which explores waveform similarities, may hold the keys to refined measurements of all inner-core shear properties, informing dynamical models and strengthening interpretations of the IC's anisotropic structure and viscosity. ▪ What are the shear properties of the inner core, such as the shear-wave speed, shear modulus, shear attenuation, and shear-wave anisotropy? Can the shear properties be measured seismologically and confirmed experimentally? Expected final online publication date for the Annual Review of Earth and Planetary Sciences, Volume 50 is May 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Effects of decay on the shear properties of nailed joints parallel and perpendicular to the grain

Information on the properties of nailed joints with decayed member is necessary to evaluate the remaining structural properties of timber constructions. In this study, loading tests were conducted on nailed joints parallel and perpendicular to the grain with decayed members, and the relationship between the decrease in shear properties and the loading direction to the grain was investigated. After the loading tests, the extent of decay of the specimens was evaluated by the penetration depth of Pilodyn and the decay depth, and these were compared with the shear properties of the nailed joints. The nailed joints with decay had a low load at the initial deformation, regardless of the loading direction to the grain. The initial stiffness, yield resistance, and maximum resistance of the nailed joints parallel to the grain were negatively correlated with the Pilodyn penetration depth, and those of the nailed joints perpendicular to the grain showed no significant correlation with the Pilodyn penetration depth at the 5% level. The initial stiffness, yield resistance, and maximum resistance of the nailed joints parallel to the grain tended to decrease with increasing decay depth, and those of the nailed joints perpendicular to the grain did not exhibit this tendency. The shear properties of the nailed joints significantly decreased at small decay depths.