scholarly journals Thickness measurement of the stripper foil using modified nuclear-analytical method

2015 ◽  
Vol 16 (1) ◽  
pp. 90-97 ◽  
Author(s):  
V.I. Soroka ◽  
◽  
V.V. Ostashko ◽  
V.A. Onischuk ◽  
E.M. Mozhzhukhin ◽  
...  
2013 ◽  
Vol 60 (2) ◽  
pp. 29-36
Author(s):  
Mikušová V. ◽  
Lukačovičová O. ◽  
Havránek E.

Abstract The contents of selected elements (Mn, Fe, Co, Ni, Cu, Zn, Hg and Pb) in samples of loose tea of agrimony “Repikovy čaj” (Agrimonia eupatoria L.) were studied in this work. Identification and determination of the selected elements content were performed using X-ray fluorescence spectrometry - the nuclear analytical method based on the interaction between low-energy gamma and X radiation and analysed substance. Solid form samples were pressed in tablets and directly analysed. Prepared infusions were analysed after the preconcentration of the elements using precipitation with thioacetamide and ammonium diethyldithiocarbamate with subsequent filtration of created precipitates through a nitrocellulose filter. Detection limits obtained from both methods were compared and their suitability for elemental analysis of plant preparations was discussed.


Author(s):  
John A. Trotter

Hemoglobin is the specific protein of red blood cells. Those cells in which hemoglobin synthesis is initiated are the earliest cells that can presently be considered to be committed to erythropoiesis. In order to identify such early cells electron microscopically, we have made use of the peroxidatic activity of hemoglobin by reacting the marrow of erythropoietically stimulated guinea pigs with diaminobenzidine (DAB). The reaction product appeared as a diffuse and amorphous electron opacity throughout the cytoplasm of reactive cells. The detection of small density increases of such a diffuse nature required an analytical method more sensitive and reliable than the visual examination of micrographs. A procedure was therefore devised for the evaluation of micrographs (negatives) with a densitometer (Weston Photographic Analyzer).


Author(s):  
P. Echlin ◽  
M. McKoon ◽  
E.S. Taylor ◽  
C.E. Thomas ◽  
K.L. Maloney ◽  
...  

Although sections of frozen salt solutions have been used as standards for x-ray microanalysis, such solutions are less useful when analysed in the bulk form. They are poor thermal and electrical conductors and severe phase separation occurs during the cooling process. Following a suggestion by Whitecross et al we have made up a series of salt solutions containing a small amount of graphite to improve the sample conductivity. In addition, we have incorporated a polymer to ensure the formation of microcrystalline ice and a consequent homogenity of salt dispersion within the frozen matrix. The mixtures have been used to standardize the analytical procedures applied to frozen hydrated bulk specimens based on the peak/background analytical method and to measure the absolute concentration of elements in developing roots.


Author(s):  
John F. Mansfield ◽  
Douglas C. Crawford

A method has been developed that allows on-line measurement of the thickness of crystalline materials in the analytical electron microscope. Two-beam convergent beam electron diffraction (CBED) patterns are digitized from a JEOL 2000FX electron microscope into an Apple Macintosh II microcomputer via a Gatan #673 CCD Video Camera and an Imaging Systems Technology Video 1000 frame-capture board. It is necessary to know the lattice parameters of the sample since measurements are made of the spacing of the diffraction discs in order to calibrate the pattern. The sample thickness is calculated from measurements of the spacings of the fringes that are seen in the diffraction discs. This technique was pioneered by Kelly et al, who used the two-beam dynamic theory of MacGillavry relate the deviation parameter (Si) of the ith fringe from the exact Bragg condition to the specimen thickness (t) with the equation:Where ξg, is the extinction distance for that reflection and ni is an integer.


Planta Medica ◽  
2008 ◽  
Vol 74 (09) ◽  
Author(s):  
K Miyagi ◽  
T Fujise ◽  
N Koga ◽  
K Wada ◽  
M Yano ◽  
...  

Author(s):  
Jianqi Li ◽  
Yu Zhou ◽  
Jianying Li

This paper presented a novel analytical method for calculating magnetic field in the slotted air gap of spoke-type permanent-magnet machines using conformal mapping. Firstly, flux density without slots and complex relative air-gap permeance of slotted air gap are derived from conformal transformation separately. Secondly, they are combined in order to obtain normalized flux density taking account into the slots effect. The finite element (FE) results confirmed the validity of the analytical method for predicting magnetic field and back electromotive force (BEMF) in the slotted air gap of spoke-type permanent-magnet machines. In comparison with FE result, the analytical solution yields higher peak value of cogging torque.


Sign in / Sign up

Export Citation Format

Share Document