Study of Wireless Sensor Node Functions for Underwater Monitoring Sensor Network

2013 ◽  
Vol 133 (4) ◽  
pp. 414-420 ◽  
Author(s):  
Tsuyoshi Suzuki ◽  
Takafumi Kobayashi ◽  
Kei Sawai ◽  
Kuniaki Kawabata ◽  
Fumiaki Takemura ◽  
...  
Keyword(s):  
Sensor Network ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Wireless Sensor Node

Design of a Wireless Sensor Network Node Based on STM32

2013 ◽  
Vol 347-350 ◽  
pp. 1920-1923
Author(s):  
Yu Jia Sun ◽  
Xiao Ming Wang ◽  
Fang Xiu Jia ◽  
Ji Yan Yu
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Network Node ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Communication Module ◽  
Design Factors

The characteristics and the design factors of wireless sensor network node are talked in this article. According to the design factors of wireless sensor network, this article will mainly point out the design of wireless sensor nodes based a Cortex-M3 Microcontroller STM32F103RE chip. And the wireless communication module is designed with a CC2430 chip. Our wireless sensor node has good performance in our test.

scholarly journals Design of a State Monitoring System for Equipment based on the Zigbee Wireless Sensor Network

2016 ◽  
Vol 12 (06) ◽  
pp. 20 ◽  
Author(s):  
Li Hua ◽  
Xu Da ◽  
Fuquan Zhao
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Monitoring System ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
State Monitoring ◽  
Sensor Module ◽  
Wireless Module ◽  
Hardware Circuit

For the sake of overcoming the shortcoming of some equipment such as complex wiring and much measurement parameter, a wireless state monitoring system is developed based on Zigbee, which was composed of upper monitor control PC, wireless gateway CC2530, sensor node CC2530 and sensor module. By studying the characteristic of the equipment, wireless sensor network of a center controller and six wireless sensor node was made up. Then the nod hardware circuit were designed, the wireless module software was programmed by C language, and furthermore, the user interface software was developed based on LabVIEW. The test is done to show that the system can meet state monitoring requirements for some equipment.

Wireless Sensor Node Deployment Research

2012 ◽  
Vol 503-504 ◽  
pp. 1514-1517
Author(s):  
Hai Shen Peng
Keyword(s):  
Wireless Sensor Network ◽  
Data Collection ◽  
Sensor Network ◽  
Energy Management ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Node Deployment ◽  
Gathering Data

In view of static wireless sensor node deployment efficiency low and dynamic wireless sensor node deployment non-uniform question, proposed based on a sensation environment object minute bunch with the motion proxy node gathering data method, effectively solves wireless sensor node deployment energy management and data collection and so on crucial the technical difficult problems, thus enhances the wireless sensor network the application value

scholarly journals Implementasi Push Message Dengan Menggunakan Restful Web Service Pada Komunikasi Wireless Sensor

Repositor ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 79
Author(s):  
Rino Nugroho ◽  
Mahar Faiqurahman ◽  
Zamah Sari
Keyword(s):  
Wireless Sensor Network ◽  
Web Service ◽  
Sensor Network ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Communication Process ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Message Mechanism ◽  
Restful Web Service

Wireless Sensor Network (WSN) is a wireless network consisting of one or more nodes even numbering thousands. The nodes in the wireless sensor network (WSN) consist of sensor nodes and sink nodes. The use of wireless sensors on the network can form a node that can communicate with each other. The communication process generally uses a pull mechanism that precedes the data query process from the node to node sensor that provides sensing data. In some wireless sensor node architecture, this pull mechanism is considered less effective because the node sink must first request data to the sensor node. Alternative, a push message mechanism can be used to transmit sensed data within specified or determined time intervals.In this research is implemented push message mechanism by using restful web service in wireless sensor communications. Test results on the delivery of data by push data transmission obtained to sink nodes alternately in accordance with the order of destination address listed or stored in memory sensor node. And in doing data delivery to be efficient in the absence of data requests at any time.

Design and Application of Wireless Sensor Network System with GPRS Technology

2014 ◽  
Vol 1022 ◽  
pp. 245-248 ◽  
Author(s):  
Qing Tan ◽  
Jun Ling Qiao
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Sensor Node ◽  
Low Cost ◽  
Wireless Sensor ◽  
Physiological Data ◽  
Network System ◽  
Wireless Sensor Node ◽  
Processing Information ◽  
Design And Application

Wireless sensor network through a set of connected by wireless sensor node sensing, collecting and processing information, has the characteristics of low cost, flexibility. The gateway device is also equipped with the GPRS communication unit, the GPRS communication unit is mainly composed of GM862 module. This paper uses GPRS technology to transmit physiological data, can not consider the establishment of wireless sensor network. The paper proposes design and application of the wireless sensor network system based on GPRS Technology.

scholarly journals Monitoring Penggunaan Daya listrik Sebagai Implementasi Internet of Things Berbasis Wireless Sensor Network

2017 ◽  
Vol 16 (3) ◽  
pp. 50
Author(s):  
I Gusti Putu Mastawan Eka Putra ◽  
Ida Ayu Dwi Giriantari ◽  
Lie Jasa
Keyword(s):  
Wireless Sensor Network ◽  
Internet Of Things ◽  
Sensor Network ◽  
Sensor Node ◽  
Electrical Energy ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
The Internet ◽  
Wireless Sensor Node ◽  
Electrical Parameters

One implementation of the Internet of Things (IoT) conducted in this study to realize the system of monitoring and control of electrical energy usage-based Wireless Sensor Network (WSN). This research method is the design of wireless sensor nodes that can measure the electrical parameters of alternating current (AC) as effective voltage, effective current, active power, apparent power, power factor and total electrical energy consumption by using modules ESP8266 as a liaison with a Wi-Fi. Calculation of electrical parameters obtained from ATmega328P microcontroller ADC readings of a step-down transformer that is used as a voltage sensor and sensor SCT013 used as AC current sensors will be transmitted to the server over the network from a Wi-Fi Access Point (AP). ESP8266 modules are programmed using AT-Command proven to reliably measure can transmit data simultaneously with serial data format of the wireless sensor node to a server using TCP / IP protocol. Monitoring power consumption via the internet which are designed in the research, either through the Android application and web browser proven to be reliably able to show some electrical parameters with the same data than the data logger recaps taken from SD-Card installed in the wireless sensor node.

scholarly journals A Logistics Status Real-time Tracking System Based on Wireless Sensor Network

2018 ◽  
Vol 14 (05) ◽  
pp. 58
Author(s):  
Zeyun Chen
Keyword(s):  
Wireless Sensor Network ◽  
Real Time ◽  
Sensor Network ◽  
Sensor Node ◽  
Tracking System ◽  
Wireless Sensor ◽  
Normal Operation ◽  
Wireless Sensor Node ◽  
Logistics Industry ◽  
Logistics Process

The progress in the economic society has driven the rapid development of the logistics industry. In the face of increasingly enormous and complicated logistics systems, it is of great practical significance to study how to effectively control the logistics process, minimize the labour cost and provide real-time monitoring data for users. For this purpose, this paper designs an active logistics status tracking (ALST) system platform based on Wireless sensor network (WSN). This paper, by fully integrating the characteristics of WSN, designs the system architecture based on the design philosophy of active logistics status tracking method; it also constructs and realizes the hardware function modules such as wireless sensor node, vehicle gateway, user terminal and backend server etc., and adopts the finite-state machine (FSM)-based active tracking model to maintain the logistics object status; and then it carries out programming of wireless sensor node active state tracking in TinyOS2.x, and finally performs system test under normal operation. The active logistics status tracking system can be widely applied in the logistics industry, to optimize the logistics process, reduce losses and improve logistics operation efficiency.

Sign in / Sign up

Export Citation Format

Share Document