Design of a Wireless Sensor Network Node Based on STM32

2013 ◽  
Vol 347-350 ◽  
pp. 1920-1923
Author(s):  
Yu Jia Sun ◽  
Xiao Ming Wang ◽  
Fang Xiu Jia ◽  
Ji Yan Yu
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Network Node ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Communication Module ◽  
Design Factors

The characteristics and the design factors of wireless sensor network node are talked in this article. According to the design factors of wireless sensor network, this article will mainly point out the design of wireless sensor nodes based a Cortex-M3 Microcontroller STM32F103RE chip. And the wireless communication module is designed with a CC2430 chip. Our wireless sensor node has good performance in our test.

scholarly journals Development of Wireless Sensor Node Addressing and Data Packet Collision Avoidance Scheme

2019 ◽  
Vol 8 (2S6) ◽  
pp. 803-807
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Packet Collision ◽  
Autonomous Sensor ◽  
Spatially Distributed

Wireless sensor network (WSN) consists of autonomous sensor devices that are spatially distributed in a wide area. Wireless sensor network is built up from a large number of sensor nodes that are assigned to a specific tasks and most probably is monitoring and reporting tasks. However, since the network might be expanded to hundreds, thousands or even millions of sensor nodes, there will be a high chance for the data from different wireless sensor nodes to collide with one another. Therefore, a proper node addressing scheme is needed to synchronize the data packages transmissions to the sink station. In this paper, a seven bytes addressing string scheme is proposed to encapsulate the node data and assist the sink station in identifying the data packages sources. The addressing string will be created in the wireless sensor node which it contains the node ID, package ID and the node data as well. The package ID is included to detect collided packages within the network. The data packages collision is avoided by allowing the sensor node to access the RF channel and transmit the data at a random time. The experimental results reviled that the proposed scheme was successfully addressed the wireless sensor node and make node identification at the sink station easy.

Mobile Nodes Deployment Scheme Design Based on Perceived Probability Model in Heterogeneous Wireless Sensor Network

2014 ◽  
Vol 26 (5) ◽  
pp. 616-621 ◽  
Author(s):  
Ningning Wu ◽  
◽  
Juwei Zhang ◽  
Qiangyi Li ◽  
Shiwei Li ◽  
...  
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Probability Model ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Wireless Sensor Nodes ◽  
Network Nodes ◽  
Heterogeneous Wireless Sensor Network ◽  
Perceived Probability

<div class=""abs_img""><img src=""[disp_template_path]/JRM/abst-image/00260005/10.jpg"" width=""200"" /> Nodes moving direction in our scheme</div> Wireless sensor network nodes deployment optimization problem is studied and wireless sensor nodes deployment determines its capability and lifetime. The nodes deployment scheme based on the perceived probability model aiming at wireless sensor network nodes which are randomly deployed is designed. The scheme can be used to calculate the perceived probability in the area around wireless sensor network nodes and move the wireless sensor nodes to the low perceived probability area according to the current energy of the wireless sensor node. The simulation results show that this deployment scheme achieves the goal of the nodes reasonable distribution by improving the network coverage and reducing the nodes movement distance and energy consumption. </span>

scholarly journals Implementasi Push Message Dengan Menggunakan Restful Web Service Pada Komunikasi Wireless Sensor

Repositor ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 79
Author(s):  
Rino Nugroho ◽  
Mahar Faiqurahman ◽  
Zamah Sari
Keyword(s):  
Wireless Sensor Network ◽  
Web Service ◽  
Sensor Network ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Communication Process ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Message Mechanism ◽  
Restful Web Service

Wireless Sensor Network (WSN) is a wireless network consisting of one or more nodes even numbering thousands. The nodes in the wireless sensor network (WSN) consist of sensor nodes and sink nodes. The use of wireless sensors on the network can form a node that can communicate with each other. The communication process generally uses a pull mechanism that precedes the data query process from the node to node sensor that provides sensing data. In some wireless sensor node architecture, this pull mechanism is considered less effective because the node sink must first request data to the sensor node. Alternative, a push message mechanism can be used to transmit sensed data within specified or determined time intervals.In this research is implemented push message mechanism by using restful web service in wireless sensor communications. Test results on the delivery of data by push data transmission obtained to sink nodes alternately in accordance with the order of destination address listed or stored in memory sensor node. And in doing data delivery to be efficient in the absence of data requests at any time.

scholarly journals Monitoring Penggunaan Daya listrik Sebagai Implementasi Internet of Things Berbasis Wireless Sensor Network

2017 ◽  
Vol 16 (3) ◽  
pp. 50
Author(s):  
I Gusti Putu Mastawan Eka Putra ◽  
Ida Ayu Dwi Giriantari ◽  
Lie Jasa
Keyword(s):  
Wireless Sensor Network ◽  
Internet Of Things ◽  
Sensor Network ◽  
Sensor Node ◽  
Electrical Energy ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
The Internet ◽  
Wireless Sensor Node ◽  
Electrical Parameters

One implementation of the Internet of Things (IoT) conducted in this study to realize the system of monitoring and control of electrical energy usage-based Wireless Sensor Network (WSN). This research method is the design of wireless sensor nodes that can measure the electrical parameters of alternating current (AC) as effective voltage, effective current, active power, apparent power, power factor and total electrical energy consumption by using modules ESP8266 as a liaison with a Wi-Fi. Calculation of electrical parameters obtained from ATmega328P microcontroller ADC readings of a step-down transformer that is used as a voltage sensor and sensor SCT013 used as AC current sensors will be transmitted to the server over the network from a Wi-Fi Access Point (AP). ESP8266 modules are programmed using AT-Command proven to reliably measure can transmit data simultaneously with serial data format of the wireless sensor node to a server using TCP / IP protocol. Monitoring power consumption via the internet which are designed in the research, either through the Android application and web browser proven to be reliably able to show some electrical parameters with the same data than the data logger recaps taken from SD-Card installed in the wireless sensor node.

scholarly journals Impedance-Based Wireless Sensor Network for Metal-Protective Coating Evaluation

2013 ◽  
pp. 177-192
Author(s):  
Ronghua Yu ◽  
Qixin Zhou ◽  
Yechun Wang ◽  
Chao You
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Protective Coating ◽  
Electrochemical Impedance ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Data ◽  
Rf Transceiver ◽  
Wireless Sensor Nodes ◽  
Flowing Fluid

Researchers have been focused on the influences of flowing fluid on the corrosion of bare metals, but there is little emphasis on the degradation of metal-protective coating. Evaluating the metal-protective coating usually uses the Electrochemical Impedance Spectroscopy (EIS) method. EIS is a technique used for evaluating coating permeability or barrier performance based on the electrical impedance of coating. This paper presents a new impedance-based wireless sensor network for metal-protective coating evaluation. This wireless sensor network consists of two parts: impedance-based wireless sensor nodes and a wireless data base that are equipped with a network analyzer (AD5933) and a RF transceiver (CC1111/CC1110). In the experiment, there are three coating panels immersed in flowing deionized water (DI water) and one coating panel immersed in stationary DI water. Experimental results demonstrate that the proposed wireless sensor network is capable to evaluate the coating degrading.

Optimisation of Radiation Beam in Linear Nodes Array of Wireless Sensor Network for Improved Performance

2012 ◽  
pp. 215-225
Author(s):  
N. N. N. Abd. Malik ◽  
M. Esa ◽  
S. K. S. Yusof ◽  
S. A. Hamzah ◽  
M. K. H. Ismail
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Linear Array ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Communication Link ◽  
Radiation Beam ◽  
Wireless Sensor Nodes ◽  
Position Errors ◽  
Improved Performance

This chapter presents an intelligent method of optimising the radiation beam of wireless sensor nodes in Wireless Sensor Network (WSN). Each node has the feature of a monopole antenna. The optimisation involves selection of nodes to be organised as close as possible to a uniform linear array (ULA) in order to minimise the position errors, which will improve the radiation beam reconfiguring performance. Instead of utilising random beamforming, which needs a large number of sensor nodes to interact with each other and form a narrow radiation beam, the developed optimisation algorithm is emphasized to only a selected number of sensor nodes which can construct a linear array. Thus, the method utilises radiation beam reconfiguration technique to intelligently establish a communication link in a WSN.

Target Tracking in Wireless Sensor Network

2020 ◽  
pp. 857-880
Author(s):  
Madhuri Rao ◽  
Narendra Kumar Kamila
Keyword(s):  
Wireless Sensor Network ◽  
Target Tracking ◽  
Sensor Network ◽  
Traffic Control ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Matlab Simulation ◽  
Wireless Sensor Nodes ◽  
Habitat Monitoring ◽  
Emergency Rescue

Wireless Sensor nodes are being employed in various applications like in traffic control, battlefield, and habitat monitoring, emergency rescue, aerospace systems, healthcare systems and in intruder tracking recently. Tracking techniques differ in almost every application of Wireless Sensor Network (WSN), as WSN is itself application specific. The chapter aims to present the current state of art of the tracking techniques. It throws light on how mathematically target tracking is perceived and then explains tracking schemes and routing techniques based on tracking techniques. An insight of how to code localization techniques in matlab simulation tool is provided and analyzed. It further draws the attention of the readers to types of tracking scenarios. Some of the well established tracking techniques are also surveyed for the reader's benefit. The chapter presents with open research challenges that need to be addressed along with target tracking in wireless sensor networks.

scholarly journals Design of a State Monitoring System for Equipment based on the Zigbee Wireless Sensor Network

2016 ◽  
Vol 12 (06) ◽  
pp. 20 ◽  
Author(s):  
Li Hua ◽  
Xu Da ◽  
Fuquan Zhao
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Monitoring System ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
State Monitoring ◽  
Sensor Module ◽  
Wireless Module ◽  
Hardware Circuit

For the sake of overcoming the shortcoming of some equipment such as complex wiring and much measurement parameter, a wireless state monitoring system is developed based on Zigbee, which was composed of upper monitor control PC, wireless gateway CC2530, sensor node CC2530 and sensor module. By studying the characteristic of the equipment, wireless sensor network of a center controller and six wireless sensor node was made up. Then the nod hardware circuit were designed, the wireless module software was programmed by C language, and furthermore, the user interface software was developed based on LabVIEW. The test is done to show that the system can meet state monitoring requirements for some equipment.

scholarly journals Impedance-Based Wireless Sensor Network for Metal-Protective Coating Evaluation

2011 ◽  
Vol 1 (3) ◽  
pp. 25-39 ◽  
Author(s):  
Ronghua Yu ◽  
Qixin Zhou ◽  
Yechun Wang ◽  
Chao You
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Protective Coating ◽  
Electrochemical Impedance ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Data ◽  
Rf Transceiver ◽  
Wireless Sensor Nodes ◽  
Flowing Fluid

Researchers have been focused on the influences of flowing fluid on the corrosion of bare metals, but there is little emphasis on the degradation of metal-protective coating. Evaluating the metal-protective coating usually uses the Electrochemical Impedance Spectroscopy (EIS) method. EIS is a technique used for evaluating coating permeability or barrier performance based on the electrical impedance of coating. This paper presents a new impedance-based wireless sensor network for metal-protective coating evaluation. This wireless sensor network consists of two parts: impedance-based wireless sensor nodes and a wireless data base that are equipped with a network analyzer (AD5933) and a RF transceiver (CC1111/CC1110). In the experiment, there are three coating panels immersed in flowing deionized water (DI water) and one coating panel immersed in stationary DI water. Experimental results demonstrate that the proposed wireless sensor network is capable to evaluate the coating degrading.

Wireless Sensor Node Deployment Research

2012 ◽  
Vol 503-504 ◽  
pp. 1514-1517
Author(s):  
Hai Shen Peng
Keyword(s):  
Wireless Sensor Network ◽  
Data Collection ◽  
Sensor Network ◽  
Energy Management ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Node Deployment ◽  
Gathering Data

In view of static wireless sensor node deployment efficiency low and dynamic wireless sensor node deployment non-uniform question, proposed based on a sensation environment object minute bunch with the motion proxy node gathering data method, effectively solves wireless sensor node deployment energy management and data collection and so on crucial the technical difficult problems, thus enhances the wireless sensor network the application value

Sign in / Sign up

Export Citation Format

Share Document