Assessing heritability and variance components of agronomic traits of four alfalfa (Medicago sativa L.) cultivars

2004 ◽  
Vol 52 (3) ◽  
pp. 263-268 ◽  
Author(s):  
E. Ateş ◽  
A. S. Tekeli
Keyword(s):  
Seed Yield ◽  
Variance Components ◽  
Dry Matter ◽  
Agronomic Traits ◽  
Block Design ◽  
Stem Diameter ◽  
Main Stem ◽  
Dry Matter Yield ◽  
Stem Height ◽  
Herbage Yield

This research was conducted between the years 1999-2002 in the experimental area of the Field Crops Department of Tekirdag Agricultural Faculty in Turkey. The experiment was laid out in a randomized block design with three replications. Four alfalfa cultivars were used. variance components, variance coefficients and heritability values were determined for morphological characters, herbage yield, dry matter yield and seed yield. The maximum main stem height (78.69 cm), main stem diameter (4.85 mm), leaflet width (0.93 cm), seeds/pod (6.57), herbage yield (75.64 t ha-1), dry matter yield (20.06 t ha-1) and seed yield (0.49 t ha-1) were obtained from the cultivar Marina. The leaflet length ranged from 1.65 to 2.08 cm and the raceme length from 3.15 to 4.38 cm in the alfalfa cultivars. The highest 1000-seed weights (2.42-2.49 g) were found in cultivars Marina and Sitel. The heritability values of main stem height, main stem diameter, leaflet length and width, leaf/stem ratio, racemes/main stem, raceme length, seeds/pod, 1000-seed weight, herbage yield, dry matter yield and seed yield were calculated as 91.0%, 97.6%, 81.8%, 88.8%, 90.4%, 28.3%, 99.0%, 99.2%, 88.0%, 97.2%, 99.6% and 95.4%, respectively.

scholarly journals Evaluation of Biomass Yield and Nutritional Composition of Soybean (Glycine Max (L.)Merrill) Varieties Grown in Low Land Areas of Eastern Amhara, Ethiopia

2020 ◽  
Author(s):  
Abito Asres ◽  
Solomon Tiruneh
Keyword(s):  
Glycine Max ◽  
Seed Yield ◽  
Dry Matter ◽  
Biomass Yield ◽  
Block Design ◽  
Nutritional Composition ◽  
Dry Matter Yield ◽  
Combined Analysis ◽  
Strong Evaluation ◽  
Glycine Max L

The experiment was conducted in three locations Jari, Chefa and Sirinka of Eastern Amhara to select the best performing varieties, in terms of biomass yield, chemical composition, haulm yield, seed yield and other agronomic characteristics of Glycine max (L.) Merrill grown under the rain- fed condition of lowland areas of Eastern Amhara in a randomized complete block design with tree replications. Twelve released soybean varieties were Afgat ,Belesa-95, Boshe , Cheri , Dhidhessa, Gishama , Gizo, Korme, Pawe-03, katta, Wegayen and Wollo were used as a treatments. The seeds were planted in 40 cm between rows and 10 cm between plants on a plot size of 3.2m*4m. Spacing between blocks and plots were 1 and 0.5m, respectively. The seed rate was 60 kg/ha and a fertilizer rate 100 kg/ha NPS was applied during seed planting. The combined analysis of variance over two years at location Jari for dry matter yield of varieties Afgat, Gizo, Pawe-03, Wogayen and Wollo were significantly higher as compared to other soybean varieties. The combined analysis across locations at Jari and Sirinka (2019-second year) showed that varieties Afgat, Gishama, Gizo, Pawe-03, Wogayen and Wollo had higher dry matter yield and varieties Gishama (3.97 t/ha), Gizo (3.60 t/ha), Pawe-03 (4.04 t/ha) and Wogayen (3.36 t/ha) had higher haulm yield as compared with other varieties. The combined analysis across locations at Jari and Sirinka (2019) showed that varieties Pawe-03(2951 kg/ha), Gizo (2862 kg/ha), Afgat (2859 kg/ha), Gishama (2654 kg/ha),Wollo (2461 kg/ha) and Wogayen (2404 kg/ha) had higher seed yield as compared with other varieties. The variety Wollo gave higher crud protein content in two locations (Jari and Sirinka) .Therefore, varieties Afgat, Pawe-03 and Wollo were recommends for the given areas of Jari , Chefa, Sirinka and could be produced in similar environments for the best of produced optimal amount of dry matter, haulm and seed yield and good protein supplement for production of ruminants.Thus, further researches will be needed to investigate on the utilization of livestock.

scholarly journals Repeatability estimates and minimum number of evaluations for selection of elephant-grass genotypes for herbage production

2020 ◽  
Vol 36 (1) ◽  
Author(s):  
Erina Vitório Rodrigues ◽  
Rogério Figueiredo Daher ◽  
Geraldo de Amaral Gravina ◽  
Alexandre Pio Viana ◽  
Maria do Socorro Bezerra de Araújo ◽  
...  
Keyword(s):  
Plant Height ◽  
Principal Components ◽  
Dry Matter ◽  
Block Design ◽  
Phenotypic Selection ◽  
Stem Diameter ◽  
Dry Matter Yield ◽  
Elephant Grass ◽  
Minimum Number ◽  
Selection Of

In forage-plants breeding, the selection of superior genotypes has been undertaken through successive harvests in previously established intervals. However, this process involves many steps, the evaluation of many traits, and a great spending with costs and labor. Thus the estimate of the repeatability is essential in improvement of perennials, it allows predicting genotypic value of the individual, the minimum number of evaluations in the selection of genotypes and minimizes resources and time in the selection of promising individuals. The objective of this study was to estimate the repeatability coefficient for morphological traits in elephant grass and determine the number of evaluations needed for phenotypic selection more efficient. The experimental randomized block design with 53 genotypes and two replications. The repeatability coefficients were estimated for variables plant height, number of tillers, stem diameter and dry matter yield, using the methods of Anova, Principal Components and Structural Analysis. We observed significant differences between genotypes (P <0.01) for all variables. The main components provide larger estimates of repeatability when compared to other methods. Estimates of the repeatability coefficients are of high magnitude average for the variables plant height (0.44) number of tillers (0.44) and stem diameter (0.63) and low magnitude for dry matter production (0.27). The Principal Components method requires five, five, two and eleven measurements for plant height, number of tillers, stem diameter and dry matter yield, respectively, with 80% reliability.  

Effects of cutting frequency and levels of nitrogen fertilizer on herbage yield of a guinea grass (Panicum maximum) pasture.

2021 ◽  
Vol 38 (2) ◽  
pp. 184-197
Author(s):  
C. C. Onyeonagu ◽  
J. E. Asiegbu
Keyword(s):  
Dry Matter ◽  
Sandy Loam ◽  
Block Design ◽  
Weekly Interval ◽  
Panicum Maximum ◽  
Dry Matter Yield ◽  
Fertilizer N ◽  
Herbage Yield ◽  
Cutting Frequency ◽  
Four Levels

The effects of fertilizer-N application and cutting frequency on the herbage yield of Panicum maximum pasture were investigated in 2001 through 2004 in a sandy loam soil at Nsukka. The experiment was a 4r 4 factorial arrangement laid out in a randomized complete block design with three replications. Treatments comprised four levels of Nitrogen of 0, 150, 300, and 450 kg N ha' and four harvesting frequencies of 3-6-19- and 12-weekly intervals, resulting in süteen treatment combinations per block, Grass dry matter yield increased significantly (P < 0.05) from 7.799 to 10,993 kg ha' and from 5,715 to 14,220 kg ha' when the interval between cuts extended from 3 to 12 weeks at the first and fourth harvest years, respectively. Pasture plots cut at 3- or 6 weeks intervals exhibited much greater weed proportion than those cut at 9-, or 12-week interval. The total annual herbage dry matter yield increased significantly (P < 0.05) from 8.564 to 11,312 kg ha and from 6,814 to 10,268 in 2001 and 2004, respectively, when fertilizer N was increased from 0 to 450 kg N ha. A combination of 12-weekly interval of cut with 300 kg N ha gave a significantly higher forage grass herbage dry matter yield compared with the values got from 3- or 6-weekly interval combined with any N rate. Fertilizing at 300-450 kg N ha when combined with cutting at 9 to 12-weekly interval bet ween citts was more effective in suppressing growth and proportion of weeds.    

scholarly journals Effect of Planting Dates and Nitrogen Fertilizer on Growth and Yield of Safflower

2021 ◽  
Vol 910 (1) ◽  
pp. 012026
Author(s):  
Zainab N. M. A. Al-Zubaidy ◽  
Maher H. S. Al-Mohammad
Keyword(s):  
Seed Yield ◽  
Nitrogen Fertilizer ◽  
Harvest Index ◽  
Dry Matter ◽  
Block Design ◽  
Growth And Yield ◽  
Dry Matter Yield ◽  
Planting Dates ◽  
Two Factors ◽  
Significant Superiority

Abstract A field experiment was carried out during winter agricultural season 2020/2021 in Babylon Governorate in at Tajieh region, southeast of Hilla city, to study the effect of planting dates and nitrogen fertilizer on the growth and yield of safflower. The experiment included two factors: planting dates (1 and 15 November and 1 December), and nitrogen fertilizer at levels (0, 90, 120 and 150 kgN.ha-1), the treatments were distributed in a factorial experiment with a randomized completely block design (RCBD) with three replicates. The results showed significant superiority of planting date at December 1 on most growth and yield components parameters, it recorded the highest averages on seed yield, dry matter yield and harvest index amounted to 1576.2, 6126.0 kg.ha-1 and 25.6% respectively. However, nitrogen fertilizer at concentration 150 kg N.ha-1 affected all growth and yield and its components, it gave the highest averages for seed yield, dry matter yield and harvest index amounted to 1762.2, 6626.8 kg.ha-1 and 26.6%, respectively.

scholarly journals Evaluation of genotype × environment relationship in silage maize genotypes using biplot analysis and stability index

2020 ◽  
pp. 50-61
Author(s):  
Erkan Ozata
Keyword(s):  
Total Variation ◽  
Analysis Of Variance ◽  
Dry Matter ◽  
Block Design ◽  
Dry Matter Yield ◽  
Gge Biplot ◽  
Ge Interaction ◽  
Biplot Analysis ◽  
Silage Maize ◽  
Herbage Yield

This study was conducted to evaluate the adaptability and stability of silage maize hybrids determing herbage and dry matter yield using Biplot analysis and some stability indexes. The studies were carried out using five registered corn varieties under irrigated conditions for six years (2013-2018) in Çarşamba plain of Samsun province, Turkey. The experimental layout was a Randomized Complete Block Design with four replications. Finlay and Wilkenson's regression and Eberhart and Russel's deviation from regression (S2d) coefficients were used in statistical analysis. Genotype (G) x environment (E) interactions were studied using the additive main effects and multiplicative interaction (AMMI) and G + GE (GGE) biplot models. The combined analysis of variance revealed significant (P<0.01) effects of G, E and G × E interaction on herbage and dry matter yields. The analysis of variance indicated that 62.70% of variation in the herbage yield explained by E, 29.79% by the differences in G and 7.49% by the GE interaction. The analysis of variance indicated that 62.80% of the total variation in the dry matter yield accounted for E, 30.20% of the total variation by G and G × E interaction explained only 7.00% of the total variation in the data. The results of AMMI and GGE biplot models and stability analyses (R2, bi and S2di) revealed that PR31Y43 and Burak hybrids were stable in both herbage yield and dry matter yield.

scholarly journals Effect of Nitrogen Level on Herbage and Seed Yield of Rhodes Grass (Chloris gayana)

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Mulisa Faji Dida ◽  
Alemeyehu Abebe Lemore ◽  
Kedija Ahmed Seid
Keyword(s):  
Seed Yield ◽  
Nitrogen Fertilizer ◽  
Dry Matter ◽  
Agricultural Research ◽  
Block Design ◽  
Dry Matter Yield ◽  
Fertilizer Rate ◽  
Rhodes Grass ◽  
Economic Point ◽  
Chloris Gayana

Nitrogen is the most important macronutrient for forage and food crop production. Currently, cultivable lands in Ethiopia undergo a deficiency of this element. Thus, this study was conducted to find an appropriate rate of nitrogen (N) fertilizer for the better agronomic performance of Chloris gayana Masaba. The experiment was carried out at Assosa Agricultural Research Center. The experiment was conducted using a randomized complete block design with three replications, and the treatments were five levels of nitrogen fertilizer (0, 23, 46, 69, and 92 kg N/ha). The collected data were analyzed using the general linear model procedure of SAS, and the least significance difference was used for mean separation. Plant height at forage harvesting, dry matter yield, leaf to stem ratio, leaf height, number of leaves per plant, number of tillers, and seed yield were significantly ( p < 0.001 ) influenced by the year of planting while nonsignificantly ( p > 0.05 ) by nitrogen fertilizer rate and interaction of planting year and fertilizer rate. The mean leaf to stem ratio was significantly ( p < 0.001 ) higher in 2017 and 2018 than in the 2019 planting year. However, forage dry matter yield was significantly ( p < 0.001 ) higher in 2019, followed by 2018 and 2017 planting years. Mean seed yield was significantly ( p < 0.001 ) different among the establishment years and the peak seed yield productivity attained during the third year of harvesting (1st = 2nd < 3rd year of harvesting). Generally, all measured agronomic traits were not significantly responsive to the different fertilizer rates, and in the economic point of view, 0 kg of N/ha is recommended.

scholarly journals GENETIC CONTROL OF VARIATION IN A SELECTED POPULATION OF RUSSIAN WILD RYEGRASS (ELYMUS JUNCEUS)

1976 ◽  
Vol 56 (2) ◽  
pp. 275-280
Author(s):  
T. LAWRENCE
Keyword(s):  
Genetic Control ◽  
Seed Yield ◽  
Seed Weight ◽  
Dry Matter ◽  
Recurrent Selection ◽  
Direct Selection ◽  
Adult Plant ◽  
Dry Matter Yield ◽  
Seedling Characters ◽  
Additive Control

Progenies from a five-genotype diallel cross in Russian wild ryegrass, Elymus junceus Fisch., were studied to assess the pattern of genetic control for F1 seed weight and a number of seedling and adult plant characters. Variation in F1 seed weight was largely determined by the maternal parent, but some control by the pollen parent was apparent. Of the seedling characters, days to emerge, rate of leaf appearance, rate of tiller appearance, and seedling dry matter yield, only days to emerge showed additive variance which is amenable to direct selection. The other three characters could be most easily exploited by a recurrent selection program. The adult plant characters, date of inflorescence appearance, P content of the forage, and organic matter digestibility indicated strong additive control which is amenable to direct selection. Dry matter yield and seed yield also showed strong additive control which was accompanied by specific combining ability and weak maternal effects suggesting good progress should be possible by direct selection methods but crossing the selections in a diallel fashion prior to formation of synthetics might be desirable. The seedling characters, rate of leaf and tiller appearance and seedling dry matter yield were interrelated and associated with adult plant yield, thus offering the possibility of screening seedlings for these characters in a recurrent selection program for improved forage or seed yield.

scholarly journals DIFFERENT STABILITY METHODS FOR CULTIVAR RECOMMENDATION IN ELEPHANT-GRASS FOR ENERGY PURPOSES IN BRAZIL

CERNE ◽  
2017 ◽  
Vol 23 (4) ◽  
pp. 507-515 ◽  
Author(s):  
Veronica Brito da Silva ◽  
Rogerio Figueiredo Daher ◽  
Bruna Rafaela da Silva Menezes ◽  
Maria Lorraine Fonseca Oliveira ◽  
Maria do Socorro Bezerra Araújo ◽  
...  
Keyword(s):  
Energy Production ◽  
Dry Matter ◽  
Block Design ◽  
Dry Matter Yield ◽  
Elephant Grass ◽  
Randomized Block Design ◽  
Matter Production ◽  
Breeding Programmes ◽  
The Stability ◽  
Non Parametric

ABSTRACT The elephant-grass undergoes successive cutting and periodical evaluations that it possible to identify clones with high stability for dry matter production, which can be used for energy production. The present study was carried out to evaluate stability dry matter yield for different parametric and non-parametric methods in elephant grass genotypes for biomass production undergoes successive cutting in the agroclimatic conditions of the Norte Fluminense (RJ, Brazil). The variable measured in the 40 genotypes was dry matter yield (DMY) at 2009, 2010 and 2011 in a field study designed as randomized block design with two replicates. Each sample was grown in different environment condition. The stability methods tested were the Yates and Cochran’s, Plaisted and Peterson’s, Wricke’s ecovalence, Annicchiarico’s, Lin and Binns’ and Kang and Phan’s. Results indicated that cutting (E) and genotypes (G) influenced significantly on the performance of dry matter yield. The non-parametric stability methods were effective for the evaluation of stability in dry matter yield. Genotypes Mercker, Pinda-México, Mercker 86-México, Guaçu/IZ, Mercker Pinda, P-241-Piracicaba and Cubano Pinda were stable stability dry matter yield. Hence, there are genotypes may be exploited in future breeding programmes in order to improve productivity of upland elephant grass over environment.

scholarly journals Pruning of the main stem of Marigold: effect on capitula yield

2017 ◽  
Vol 35 (3) ◽  
pp. 425-427
Author(s):  
Jana Koefender ◽  
André Schoffel ◽  
Diego P Golle ◽  
Candida E Manfio ◽  
Alice PB Dambróz ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Factorial Experiment ◽  
Main Stem ◽  
Flower Bud ◽  
Fresh Matter ◽  
Randomized Complete Block Design

ABSTRACT The purpose of this work was to evaluate the influence of cutting the apex of the main stem of marigold plants on floral capitula yield. The experiment was carried out in a randomized complete block design, with five replicates. The following removal stages of the main stem apexes were studied: control (without pruning), up to 10 leaves, up to 15 leaves and visible flower bud. Three harvest periods were also evaluated: July, August and September, composing a factorial experiment in a 4x3 arrangement. The diameter, number, fresh matter and the dry capitula were evaluated. The most significant effect of cutting the apex of the main stem on fresh and dry matter of the capitula was obtained when the technique was performed at the time the plants had up to 15 leaves and visible flower bud. The harvesting performed in September showed to be the most promising, since it presented the larger diameter, higher number and higher fresh matter and the dry capitula.

Sign in / Sign up

Export Citation Format

Share Document