First-principles study of the structural and elastic properties of Ti5Si3 with substitutions Zr, V, Nb, and Cr

2010 ◽  
Vol 25 (12) ◽  
pp. 2317-2324 ◽  
Author(s):  
Hui-Yuan Wang ◽  
Wen-Ping Si ◽  
Shi-Long Li ◽  
Nan Zhang ◽  
Qi-Chuan Jiang
Keyword(s):  
Density Functional Theory ◽  
Elastic Properties ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Elastic Moduli ◽  
Site Occupancy ◽  
Formation Enthalpy ◽  
Functional Theory ◽  
The Density Functional Theory

The formation enthalpy, electronic structures, and elastic moduli of the intermetallic compound Ti5Si3 with substitutions Zr, V, Nb, and Cr are investigated by using first-principles methods based on the density-functional theory. Our calculation shows that the site occupancy behaviors of alloying elements in Ti5Si3, determined by their atom radius, are consistent with the available experimental observations. Furthermore, using the Voigt–Reuss–Hill (VRH) approximation method, we obtained the bulk modulus B, shear modulus G, and the Young’s modulus E. Among these four substitutions, the V, Nb, and Cr substitutions can improve the ductility of Ti5Si3 effectively, while Zr substitution has little effect on the elastic properties of Ti5Si3. The elastic property variations of Ti5Si3 due to different substitutions are found to be correlated with the Me4d–Me4d antibonding and the strengthened Me4d–Si bonding in the solids.

First-Principles Calculation of Elastic Properties of TiB2 and ZrB2

2010 ◽  
Vol 150-151 ◽  
pp. 40-43 ◽  
Author(s):  
H.Y. Wang ◽  
F.Y. Xue ◽  
Nai Hui Zhao ◽  
De Jun Li
Keyword(s):  
Density Functional Theory ◽  
Elastic Modulus ◽  
Elastic Properties ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
First Principles Calculation ◽  
Wave Method ◽  
Functional Theory ◽  
Plane Wave Method

Based on Density Functional Theory (DFT), using first-principles pseudopotential plane wave method, elastic properties and electronic structure of TiB2 and ZrB2 were calculated. The elastic constants of these compounds were calculated by Voigt-Reuss-Hill method. The results show that the elastic modulus of TiB2 and ZrB2 are 594 and 520 GPa, and the shear modulus are 268 and 229 GPa, respectively. Pugh empirical criterion and Poisson's ratio show that the two compounds are very brittle, and the brittleness of TiB2 is higher than ZrB2. Finally, the differences in elastic properties between TiB2 and ZrB2 result form their electronic structures.

scholarly journals Electron-phonon interaction in In-induced √7 ×√3 structures on Si(111) from first-principles

2021 ◽  
Author(s):  
I. Yu. Sklyadneva ◽  
Rolf Heid ◽  
Pedro Miguel Echenique ◽  
Evgueni Chulkov
Keyword(s):  
Density Functional Theory ◽  
Double Layer ◽  
First Principles ◽  
Linear Response ◽  
Density Functional ◽  
Single Layer ◽  
Phonon Interaction ◽  
Functional Theory ◽  
Electron Phonon Interaction ◽  
The Density Functional Theory

Electron-phonon interaction in the Si(111)-supported rectangular √(7 ) ×√3 phases of In is investigated within the density-functional theory and linear-response. For both single-layer and double-layer √(7 ) ×√3 structures, it...

Electronic structure of the thermoelectric materials PbTe and AgPb18SbTe20 from first-principles calculations

2010 ◽  
Vol 25 (6) ◽  
pp. 1030-1036 ◽  
Author(s):  
Pengxian Lu ◽  
Zigang Shen ◽  
Xing Hu
Keyword(s):  
Band Structure ◽  
Thermoelectric Properties ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Partial Density ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Scanning Transmission ◽  
Linearized Augmented Plane Wave

To investigate the effects of substituting Ag and Sb for Pb on the thermoelectric properties of PbTe, the electronic structures of PbTe and AgPb18SbTe20 were calculated by using the linearized augmented plane wave based on the density-functional theory of the first principles. By comparing the differences in the band structure, the partial density of states (PDOS), the scanning transmission microscope, and the electron density difference for PbTe and AgPb18SbTe20, we explained the reason from the aspect of electronic structures why the thermoelectric properties of AgPb18SbTe20 could be improved significantly. Our results suggest that the excellent thermoelectric properties of AgPb18SbTe20 should be attributed in part to the narrowing of its band gap, band structure anisotropy, the much extrema and large DOS near Fermi energy, as well as the large effective mass of electrons. Moreover, the complex bonding behaviors for which the strong bonds and the weak bonds are coexisted, and the electrovalence and covalence of Pb–Te bond are mixed should also play an important role in the enhancement of the thermoelectric properties of the AgPb18SbTe20.

Probing the electronic structures of Con (n = 1–5) clusters on γ-Al2O3 surfaces using first-principles calculations

2017 ◽  
Vol 19 (5) ◽  
pp. 3679-3687 ◽  
Author(s):  
Tao Yang ◽  
Masahiro Ehara
Keyword(s):  
Density Functional Theory ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
First Principles Calculations ◽  
Functional Theory

Using density functional theory calculations, we discussed the geometric and electronic structures and nucleation of small Co clusters on γ-Al2O3(100) and γ-Al2O3(110) surfaces.

First principles analysis of oxygen vacancy formation and migration in Sr2BMoO6 (B = Mg, Co, Ni)

RSC Advances ◽  
2016 ◽  
Vol 6 (38) ◽  
pp. 31968-31975 ◽  
Author(s):  
Shuai Zhao ◽  
Liguo Gao ◽  
Chunfeng Lan ◽  
Shyam S. Pandey ◽  
Shuzi Hayase ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Oxygen Vacancy ◽  
First Principles ◽  
Density Functional ◽  
Dft Method ◽  
Double Perovskites ◽  
Functional Theory ◽  
Oxygen Vacancy Formation ◽  
The Density Functional Theory ◽  
And Migration

In this work, we present a detailed first-principles investigation on the stoichiometric and oxygen-deficient structures of double perovskites, Sr2BMoO6 (B = Mg, Co and Ni), using the density functional theory (DFT) method.

scholarly journals Electronic, optical and thermoelectric properties of Fe2ZrP compound determined via first-principles calculations

RSC Advances ◽  
2019 ◽  
Vol 9 (44) ◽  
pp. 25900-25911 ◽  
Author(s):  
Esmaeil Pakizeh ◽  
Jaafar Jalilian ◽  
Mahnaz Mohammadi
Keyword(s):  
Density Functional Theory ◽  
Thermoelectric Properties ◽  
First Principles ◽  
Density Functional ◽  
Transport Theory ◽  
First Principles Calculations ◽  
Boltzmann Transport ◽  
Functional Theory ◽  
Boltzmann Transport Theory ◽  
The Density Functional Theory

In this study, based on the density functional theory and semi-classical Boltzmann transport theory, we investigated the structural, thermoelectric, optical and phononic properties of the Fe2ZrP compound.

Density Functional Theory Studies of Electronic Structures and Hyperfine Interactions of Muonium in Imidazole

2015 ◽  
Vol 749 ◽  
pp. 134-138 ◽  
Author(s):  
Pek Lan Toh ◽  
Shukri Sulaiman ◽  
Mohamed Ismail Mohamed Ibrahim ◽  
Lee Sin Ang
Keyword(s):  
Density Functional Theory ◽  
Electronic Structures ◽  
Density Functional ◽  
Hyperfine Interactions ◽  
Geometry Optimization ◽  
Optimization Procedure ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Total Energies ◽  
Structure Calculations

We carried out ab initio electronic structure calculations in the frameworks of the Density Functional Theory (DFT) to study the electronic structures and hyperfine interaction of muonium (Mu) in imidazole (C3H4N2) and 1–methylimidazole (CH3C3H3N2). The local energy minima and hyperfine interactions of the Mu trapped at the three studies sites were determined by performing geometry optimization procedure. The results show the total energies for all three studied sites are close to one another. The Mu hyperfine interactions were also determined, with the corresponding values vary from 343.00 MHz to 471.28 MHz for the imidazole–Mu cluster, and from 380.21 MHz – 465.57 MHz to 475.93 MHz for the cluster of 1–methylimidazole–Mu, respectively.

Calculation of electronic structure and mechanical properties of DO3–Fe75-xSi25Nix intermetallic compounds by first principles

2015 ◽  
Vol 29 (13) ◽  
pp. 1550087
Author(s):  
R. Ma ◽  
M. P. Wan ◽  
J. Huang ◽  
Q. Xie
Keyword(s):  
Mechanical Properties ◽  
Intermetallic Compounds ◽  
First Principles ◽  
Electronic Structures ◽  
Density Functional ◽  
Elastic Parameters ◽  
Functional Theory ◽  
Ni Content ◽  
The Density Functional Theory ◽  
The Difference

Based on the density functional theory (DFT), the plane-wave pseudopotential method was used to investigate the electronic structures and mechanical properties of DO 3– Fe 75-x Si 25 Ni x(x = 0, 3.125, 6.25 and 9.375) intermetallic compounds. The elastic parameters were calculated, and then the bulk modulus, shear modulus and elastic modulus were derived. The paper then focuses on the discussion of ductility and plasticity. The results show that by adding appropriate Ni to Fe 3 Si intermetallic compound can improve the ductility. But the hardness will increase when the Ni content exceeds 6.25%. Analysis of density of states (DOS) and overlap populations indicates that with the difference of the strength of bonding and activity, there were some differences of ductility among different Ni contents. The Fe 71.875 Ni 3.125 Si 25 has the lowest hardness because the covalent bonding (Fe–Si bond and Si–Ni bond) has the minimum covalent electrons.

scholarly journals ELASTIC PROPERTIES OF TRANSITION METAL DIOXIDES: XO2 (X = Ru, Rh, Os, andIr)

2008 ◽  
Vol 19 (08) ◽  
pp. 1269-1275 ◽  
Author(s):  
YANLING LI ◽  
ZHI ZENG
Keyword(s):  
Density Functional Theory ◽  
Transition Metal ◽  
Shear Modulus ◽  
Elastic Properties ◽  
First Principles ◽  
Density Functional ◽  
First Principles Calculations ◽  
Functional Theory ◽  
Debye Temperatures ◽  
Metal Dioxides

The elastic properties of rutile transition metal dioxides XO2 ( X = Ru , Rh , Os , and Ir ) are investigated using first-principles calculations based on density functional theory. Elastic constants, bulk modulus, shear modulus, and Young's modulus as well as Possion ratio are given. OsO 2 and IrO 2 show strong incompressibility. The hardness estimated for these dioxides shows that they are not superhard solids. The obtained Debye temperatures are comparative to those of transition metal dinitrides or diborides.

First principles study of the adsorption and dissociation mechanisms of H2S on a TiO2anatase (001) surface

RSC Advances ◽  
2016 ◽  
Vol 6 (10) ◽  
pp. 7941-7949 ◽  
Author(s):  
Naeem Shahzad ◽  
Akhtar Hussain ◽  
Naeem Mustafa ◽  
Nisar Ali ◽  
Mohammed Benali Kanoun ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
First Principles ◽  
Density Functional ◽  
First Principles Calculation ◽  
Functional Theory ◽  
P Adsorption ◽  
First Principles Study ◽  
The Density Functional Theory ◽  
Dissociation Mechanisms ◽  
Adsorption And Dissociation

Adsorption and dissociation mechanisms of H2S on a TiO2(001) surface were elucidated using first principles calculation based on the density functional theory.

Sign in / Sign up

Export Citation Format

Share Document