scholarly journals Synthesis of high surface area TiO2 coatings on stainless steel by electrophoretic deposition

2013 ◽  
Vol 28 (15) ◽  
pp. 2023-2030 ◽  
Author(s):  
Daniel Schiemann ◽  
Pierre Alphonse ◽  
Pierre-Louis Taberna
Keyword(s):  
Stainless Steel ◽  
Surface Area ◽  
Electrophoretic Deposition ◽  
High Surface ◽  
High Surface Area ◽  
Tio2 Coatings ◽  
Image Position

Abstract

Preparation of 1-D Nanostructured Tungsten Oxide Thin Film on Wire Mesh by Flame Vapor Deposition Process

2020 ◽  
Vol 20 (7) ◽  
pp. 4517-4520
Author(s):  
Sang-Hyeok Yoon ◽  
Kyo-Seon Kim
Keyword(s):  
Thin Film ◽  
Stainless Steel ◽  
Tungsten Oxide ◽  
Surface Area ◽  
Vapor Deposition ◽  
High Surface ◽  
High Surface Area ◽  
Wire Mesh ◽  
Oxide Thin Film ◽  
Process Conditions

Flame vapor deposition (FVD) process can be used to prepare the tungsten oxide thin film which has photocatalytic activity at visible light. The FVD process is fast and economical to prepare thin film on substrate comparing to other processes. Various nanostructured thin films could be easily prepared by controlling several process parameters in FVD. One-dimensional (1-D) nanostructures with high surface area also can be prepared reproducibly. The tungsten wire precursor was oxidized and vaporized in flame to be deposited onto the substrate. The nanostructure shapes can be adjusted by controlling nucleation and growth rates of tungsten oxide vapor on substrate. In this study, nanostructured tungsten oxide thin film was fabricated on stainless steel mesh by FVD process changing the process variables of FVD. We found that proper selection of suitable process conditions in FVD was quite important for the 1-D nanostructure growth on stainless steel wire mesh with high surface area, which is quite important for photocatalytic application.

Manufacturing and Oxidation Property of Steel and Ti Metal Fibers

2005 ◽  
Vol 475-479 ◽  
pp. 273-276
Author(s):  
Dong Bok Lee ◽  
T.H. Kim ◽  
J.H. Ko
Keyword(s):  
Stainless Steel ◽  
Melting Point ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Steel Fibers ◽  
The Core ◽  
Steel Wires ◽  
Sheath Material

Stainless steel and Ti metal fibers having a diameter of 3 µm were produced from wires by multiple extrusions. The suitable sheath coating for stainless steel to extrude the core wires to fibers was the Cu coating having ~30 µm thickness. Zinc was not a suitable sheath coating, because Zn of the low melting point had diffused into the stainless steel wires during extrusion. The oxidation of stainless steel fibers produced using the Cu sheath coating oxidized rapidly above 750°C due to the high surface area of fibers. The utilization of the Cu coating as a sheath material to extrude the core Ti wires to fibers was not possible, because the highly reactive Ti wires resisted deforming to fibers.

Tenacious Mass Transfer Limitations Drive Catalytic Selectivity during Electrochemical Carbon Dioxide Reduction

2019 ◽  
Author(s):  
Kailun Yang ◽  
Recep Kas ◽  
Wilson A. Smith
Keyword(s):  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Catalyst Layer ◽  
Active Surface ◽  
Active Surface Area ◽  
High Concentration ◽  
Copper Electrodes ◽  
Surface Enhanced ◽  
Local Current

<p>This study evaluated the performance of the commonly used strong buffer electrolytes, i.e. phosphate buffers, during CO<sub>2</sub> electroreduction in neutral pH conditions by using in-situ surface enhanced infrared absorption spectroscopy (SEIRAS). Unfortunately, the buffers break down a lot faster than anticipated which has serious implications on many studies in the literature such as selectivity and kinetic analysis of the electrocatalysts. Increasing electrolyte concentration, surprisingly, did not extend the potential window of the phosphate buffers due to dramatic increase in hydrogen evolution reaction. Even high concentration phosphate buffers (1 M) break down within the potentials (-1 V vs RHE) where hydrocarbons are formed on copper electrodes. We have extended the discussion to high surface area electrodes by evaluating electrodes composed of copper nanowires. We would like highlight that it is not possible to cope with high local current densities on these high surface area electrodes by using high buffer capacity solutions and the CO<sub>2</sub> electrocatalysts are needed to be evaluated by casting thin nanoparticle films onto inert substrates as commonly employed in fuel cell reactions and up to now scarcely employed in CO<sub>2</sub> electroreduction. In addition, we underscore that normalization of the electrocatalytic activity to the electrochemical active surface area is not the ultimate solution due to concentration gradient along the catalyst layer.This will “underestimate” the activity of high surface electrocatalyst and the degree of underestimation will depend on the thickness, porosity and morphology of the catalyst layer. </p> <p> </p>

scholarly journals Rugae-like FeP nanocrystal assembly on a carbon cloth: an exceptionally efficient and stable cathode for hydrogen evolution

Nanoscale ◽  
2015 ◽  
Vol 7 (25) ◽  
pp. 10974-10981 ◽  
Author(s):  
Xiulin Yang ◽  
Ang-Yu Lu ◽  
Yihan Zhu ◽  
Shixiong Min ◽  
Mohamed Nejib Hedhili ◽  
...  
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Hydrogen Evolution ◽  
Hydrogen Generation ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Efficiency ◽  
Carbon Cloth ◽  
Nanocrystal Assembly

High surface area FeP nanosheets on a carbon cloth were prepared by gas phase phosphidation of electroplated FeOOH, which exhibit exceptionally high catalytic efficiency and stability for hydrogen generation.

High Surface Area NiCoP Nanostructure as Efficient Water Splitting Electrocatalyst for the Oxygen Evolution Reaction

2021 ◽  
pp. 111312
Author(s):  
Sisir Maity ◽  
Dheeraj Kumar Singh ◽  
Divya Bhutani ◽  
Suchitra Prasad ◽  
Umesh V. Waghmare ◽  
...  
Keyword(s):  
Surface Area ◽  
Water Splitting ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
High Surface ◽  
High Surface Area

scholarly journals Fast synthesis of high surface area bio-based porous carbons for p-nitrophenol removal

MethodsX ◽  
2021 ◽  
pp. 101464
Author(s):  
Yichen Wu ◽  
Nan Zhang ◽  
Charles-François de Lannoy
Keyword(s):  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Porous Carbons ◽  
Fast Synthesis

Synthesis of high surface area and functionalized nanoporous biocarbons and their efficiency for CO2 capture and supercapacitors

2021 ◽  
Author(s):  
Gurwinder Singh ◽  
Rohan Bahadur ◽  
Ajanya Maria Ruban ◽  
Jefrin Marykala Davidraj ◽  
Dawei Su ◽  
...  
Keyword(s):  
Energy Storage ◽  
Surface Area ◽  
Co2 Capture ◽  
Water Purification ◽  
High Surface ◽  
High Surface Area ◽  
Energy Storage And Conversion ◽  
Waste Biomass ◽  
Fabrication Technology ◽  
Significant Attention

Nanoporous biocarbons derived from waste biomass have created significant attention owing to their great potential for energy storage and conversion and water purification. However, the fabrication technology for these materials...

Sign in / Sign up

Export Citation Format

Share Document