Surface Polymerization of the Thiophen Molecules in Chemically Adsorbed Monolayer

2008 ◽  
Vol 1091 ◽  
Author(s):  
Shin-ichi Yamamoto ◽  
Kazufumi Ogawa
Keyword(s):  
Self Assembly ◽  
Forward Bias ◽  
The Self ◽  
Pt Electrode ◽  
Lateral Direction ◽  
Surface Polymerization ◽  
Wet Process ◽  
Current Voltage ◽  
Pt Electrodes ◽  
Conduction Properties

AbstractUsing the time-averaged dielectrophoretic force from an applied electric field, we have observed the assembly of a chemically adsorbed monomolecularlayer (CAM) into microwires, connections, and an electric path according to the location within field regions of a lithographically patterned array of two platinum (Pt) electrodes. A Pt electrode/monolayer/Pt electrode junction was fabricated by the self-assembly of a rigid monomolecular, namely 3-{6-{11-(Trichlorosilyl) undecanoyl} hexyl} thiophene (TEN) with thiophen groups, in the lateral direction between the Pt gap electrodes. The technique of a conductive probe AFM (CP-AFM) has been used to investigate the forward bias conduction properties of a TEN film grown by a wet process deposition on a glass substrate. The self-assembly depends on: (1) the ideal rigidity of the chemically adsorptive monomolecular layer (CAM) and (2) the strong affinity of the thiophen end groups of the CAM for the Pt electrode. The current–voltage (I–V) characteristics of the conjugated thiophen junction exhibited stepwise features at room temperature. The (I–V) characteristics can be explained as an electron transport through the junction. From the results in the atmosphere, the conductivity of a lateral conjugated polythiophen group was calculated to be 5.0×104 S/cm. Understanding and using these effects will allow the controlled fabrication and the positioning of microwires or connections at densities far above what is now achievable.

Electric Properties of the Co-nanodots using Kelvin Probe Force Microscopy

2008 ◽  
Vol 1094 ◽  
Author(s):  
Shin-ichi Yamamoto
Keyword(s):  
Self Assembly ◽  
Forward Bias ◽  
The Self ◽  
Kelvin Probe ◽  
Pt Electrode ◽  
Lateral Direction ◽  
Force Microscopy ◽  
Wet Process ◽  
Current Voltage ◽  
Pt Electrodes

AbstractWe have observed the assembly of a chemically adsorbed monomolecularlayer (CAM) into microwires, connections, and an electric path according to the location within field regions of a lithographically patterned array of two platinum (Pt) electrodes. A Pt electrode/monolayer/Pt electrode junction was fabricated by the self-assembly of a rigid monomolecular, namely 3-{6-{11-(Trichlorosilyl) undecanoyl} hexyl} thiophene (TEN) with thiophen groups, in the lateral direction between the Pt gap electrodes. The technique of a conductive probe AFM (CP-AFM) has been used to investigate the forward bias conduction properties of a TEN film grown by a wet process deposition on a glass substrate. The self-assembly depends on: (1) the ideal rigidity of the chemically adsorptive monomolecular layer (CAM) and (2) the strong affinity of the thiophen end groups of the CAM for the Pt electrode. The current–voltage (I–V) characteristics of the conjugated thiophen junction exhibited stepwise features at room temperature. From the results in the atmosphere, the conductivity of a lateral conjugated polythiophen group was calculated to be 5.0E4 S/cm.

Ionic effects on the self-assembly, molecular dynamics and conduction properties of a 1,2,3-triazole-based amphiphile

2018 ◽  
Vol 6 (36) ◽  
pp. 9802-9810 ◽  
Author(s):  
Manh Linh Nguyen ◽  
Ho-Joong Kim ◽  
Byoung-Ki Cho
Keyword(s):  
Molecular Dynamics ◽  
Self Assembly ◽  
Electric Properties ◽  
The Self ◽  
Lithium Salts ◽  
Ionic Effects ◽  
Conduction Properties

Insertion of lithium salts in a 1,2,3-triazole-based amphiphile alters the self-assembly and electric properties.

The Nature of Rapidly Extracted Phycocyanin from the Blue-Green Alga Plectonema Boryanum

1971 ◽  
Vol 29 ◽  
pp. 366-367
Author(s):  
M. Kessel ◽  
R. MacColl
Keyword(s):  
Self Assembly ◽  
Analytical Ultracentrifugation ◽  
Uranyl Acetate ◽  
The Self ◽  
Major Protein ◽  
Subunit Structure ◽  
Blue Green Alga ◽  
Thin Sections ◽  
Blue Green Algae ◽  
Cacodylate Buffer

The major protein of the blue-green algae is the biliprotein, C-phycocyanin (Amax = 620 nm), which is presumed to exist in the cell in the form of distinct aggregates called phycobilisomes. The self-assembly of C-phycocyanin from monomer to hexamer has been extensively studied, but the proposed next step in the assembly of a phycobilisome, the formation of 19s subunits, is completely unknown. We have used electron microscopy and analytical ultracentrifugation in combination with a method for rapid and gentle extraction of phycocyanin to study its subunit structure and assembly.To establish the existence of phycobilisomes, cells of P. boryanum in the log phase of growth, growing at a light intensity of 200 foot candles, were fixed in 2% glutaraldehyde in 0.1M cacodylate buffer, pH 7.0, for 3 hours at 4°C. The cells were post-fixed in 1% OsO4 in the same buffer overnight. Material was stained for 1 hour in uranyl acetate (1%), dehydrated and embedded in araldite and examined in thin sections.

Interrelationship of the cellular distribution and secretion of regular structure (RS) protein in Bacillus licheniformis nm 105

1992 ◽  
Vol 50 (1) ◽  
pp. 712-713
Author(s):  
Xiaorong Zhu ◽  
Richard McVeigh ◽  
Bijan K. Ghosh
Keyword(s):  
Alkaline Phosphatase ◽  
Bacillus Licheniformis ◽  
Self Assembly ◽  
Gel Electrophoresis ◽  
Culture Supernatant ◽  
Regular Structure ◽  
The Self ◽  
Cellular Distribution ◽  
Structural Protein ◽  
Laboratory Cultures

A mutant of Bacillus licheniformis 749/C, NM 105 exhibits some notable properties, e.g., arrest of alkaline phosphatase secretion and overexpression and hypersecretion of RS protein. Although RS is known to be widely distributed in many microbes, it is rarely found, with a few exceptions, in laboratory cultures of microorganisms. RS protein is a structural protein and has the unusual properties to form aggregate. This characteristic may have been responsible for the self assembly of RS into regular tetragonal structures. Another uncommon characteristic of RS is that enhanced synthesis and secretion which occurs when the cells cease to grow. Assembled RS protein with a tetragonal structure is not seen inside cells at any stage of cell growth including cells in the stationary phase of growth. Gel electrophoresis of the culture supernatant shows a very large amount of RS protein in the stationary culture of the B. licheniformis. It seems, Therefore, that the RS protein is cotranslationally secreted and self assembled on the envelope surface.

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho
Keyword(s):  
Electron Beam ◽  
Self Assembly ◽  
Ion Beam ◽  
Three Dimensional ◽  
The Self ◽  
Stress Generation ◽  
Rapid Review ◽  
High Yield ◽  
3D Nanostructures ◽  
Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

Bottom-up Evolution from Disks to High-Genus Polymersomes

2018 ◽  
Author(s):  
Claudia Contini ◽  
Russell Pearson ◽  
Linge Wang ◽  
Lea Messager ◽  
Jens Gaitzsch ◽  
...  
Keyword(s):  
Self Assembly ◽  
The Self ◽  
Amphiphilic Copolymers ◽  
Chain Entanglement ◽  
Bottom Up ◽  
New Approach ◽  
High Genus ◽  
Transmission Electron ◽  
Minimal Radius ◽  
Stop Flow

<div><div><div><p>We report the design of polymersomes using a bottom-up approach where the self-assembly of amphiphilic copolymers poly(2-(methacryloyloxy) ethyl phosphorylcholine)–poly(2-(diisopropylamino) ethyl methacrylate) (PMPC-PDPA) into membranes is tuned using pH and temperature. We study this process in detail using transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and stop-flow ab- sorbance disclosing the molecular and supramolecular anatomy of each structure observed. We report a clear evolution from disk micelles to vesicle to high-genus vesicles where each passage is controlled by pH switch or temperature. We show that the process can be rationalised adapting membrane physics theories disclosing important scaling principles that allow the estimation of the vesiculation minimal radius as well as chain entanglement and coupling. This allows us to propose a new approach to generate nanoscale vesicles with genus from 0 to 70 which have been very elusive and difficult to control so far.</p></div></div></div>

Bottom-up Evolution from Disks to High-Genus Polymersomes

2018 ◽  
Author(s):  
Claudia Contini ◽  
Russell Pearson ◽  
Linge Wang ◽  
Lea Messager ◽  
Jens Gaitzsch ◽  
...  
Keyword(s):  
Self Assembly ◽  
The Self ◽  
Amphiphilic Copolymers ◽  
Chain Entanglement ◽  
Bottom Up ◽  
New Approach ◽  
High Genus ◽  
Transmission Electron ◽  
Minimal Radius ◽  
Stop Flow

<div><div><div><p>We report the design of polymersomes using a bottom-up approach where the self-assembly of amphiphilic copolymers poly(2-(methacryloyloxy) ethyl phosphorylcholine)–poly(2-(diisopropylamino) ethyl methacrylate) (PMPC-PDPA) into membranes is tuned using pH and temperature. We study this process in detail using transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and stop-flow ab- sorbance disclosing the molecular and supramolecular anatomy of each structure observed. We report a clear evolution from disk micelles to vesicle to high-genus vesicles where each passage is controlled by pH switch or temperature. We show that the process can be rationalised adapting membrane physics theories disclosing important scaling principles that allow the estimation of the vesiculation minimal radius as well as chain entanglement and coupling. This allows us to propose a new approach to generate nanoscale vesicles with genus from 0 to 70 which have been very elusive and difficult to control so far.</p></div></div></div>

Clathrin-Inspired Coating and Stabilization of Liposomes by DNA Self-Assembly

2019 ◽  
Author(s):  
Kevin N. Baumann ◽  
Luca Piantanida ◽  
Javier García-Nafría ◽  
Diana Sobota ◽  
Kislon Voïtchovsky ◽  
...  
Keyword(s):  
Self Assembly ◽  
Mechanical Stability ◽  
Lipid Vesicles ◽  
The Self ◽  
Force Microscopy ◽  
Atomic Force ◽  
Cryo Electron Microscopy ◽  
Further Development ◽  
Liposome Surface ◽  
Dna Coating

The self-assembly of the protein clathrin on biological membranes facilitates essential processes of endocytosis in biological systems and has provided a source of inspiration for materials design by the highly ordered structural appearance. By mimicking the architecture of clathrin self-assemblies to coat liposomes with biomaterials, new classes of hybrid carriers can be derived. Here we present a method for fabricating DNA-coated liposomes by hydrophobically anchoring and subsequently growing a DNA network on the liposome surface which structurally mimics clathrin assemblies. Dynamic light scattering (DLS), ζ-potential and cryo-electron microscopy (cryo-EM) measurements independently demonstrate successful DNA coating. Nanomechanical measurements conducted with atomic force microscopy (AFM) show that the DNA coating enhances the mechanical stability of the liposomes relative to uncoated ones. Furthermore, we provide the possibility to reverse the coating process by triggering the disassembly of the DNA coating through a toehold-mediated displacement reaction. Our results describe a straightforward, versatile, and reversible approach for coating and stabilizing lipid vesicles by an interlaced DNA network. This method has potential for further development towards the ordered arrangement of tailored functionalities on the surfaces of liposomes and for applications as hybrid nanocarrier.

The Self-Assembly of an Amphiphilic Block Copolymer: A Dissipative Particle Dynamics Study

2005 ◽  
Vol 42 (3) ◽  
pp. 180-183 ◽  
Author(s):  
S. G. Schulz ◽  
U. Frieske ◽  
H. Kuhn ◽  
G. Schmid ◽  
F. Müller ◽  
...  
Keyword(s):  
Block Copolymer ◽  
Self Assembly ◽  
Dissipative Particle Dynamics ◽  
Particle Dynamics ◽  
The Self ◽  
Amphiphilic Block Copolymer

Directive Effect of Chain Length in Modulating Peptide Nano-assemblies

2020 ◽  
Vol 27 (9) ◽  
pp. 923-929
Author(s):  
Gaurav Pandey ◽  
Prem Prakash Das ◽  
Vibin Ramakrishnan
Keyword(s):  
Electron Microscopy ◽  
Amino Acids ◽  
Light Scattering ◽  
Chain Length ◽  
Self Assembly ◽  
The Self ◽  
Ionic Charge ◽  
Self Assembling ◽  
Biophysical Techniques

Background: RADA-4 (Ac-RADARADARADARADA-NH2) is the most extensively studied and marketed self-assembling peptide, forming hydrogel, used to create defined threedimensional microenvironments for cell culture applications. Objectives: In this work, we use various biophysical techniques to investigate the length dependency of RADA aggregation and assembly. Methods: We synthesized a series of RADA-N peptides, N ranging from 1 to 4, resulting in four peptides having 4, 8, 12, and 16 amino acids in their sequence. Through a combination of various biophysical methods including thioflavin T fluorescence assay, static right angle light scattering assay, Dynamic Light Scattering (DLS), electron microscopy, CD, and IR spectroscopy, we have examined the role of chain-length on the self-assembly of RADA peptide. Results: Our observations show that the aggregation of ionic, charge-complementary RADA motifcontaining peptides is length-dependent, with N less than 3 are not forming spontaneous selfassemblies. Conclusion: The six biophysical experiments discussed in this paper validate the significance of chain-length on the epitaxial growth of RADA peptide self-assembly.

Sign in / Sign up

Export Citation Format

Share Document