Film Properties of High-Performance FSG Films

2001 ◽  
Vol 686 ◽  
Author(s):  
T. Yoda ◽  
H. Miyajima ◽  
K. Fujita ◽  
R. Nakata ◽  
Y. Nishiyama
Keyword(s):  
High Performance ◽  
Moisture Absorption ◽  
Chemical Properties ◽  
Film Structure ◽  
Film Properties ◽  
Air Exposure ◽  
K Value ◽  
Wide Margin ◽  
Physical And Chemical ◽  
And Chemical Properties

AbstractAn advanced FSG film of k=3.4 was developed, which exhibited excellent resistance for moisture absorption. Physical and chemical properties of this advanced FSG film were compared by typical FSG films deposited in both high density plasma (HDP) and PE-CVD reactors, for the same k value.The advanced FSG film appears to be superior to the HDP-FSG film by a wide margin in the following tests. The moisture absorption rate by TDS (after 4 days of air exposure) is about 5 times lower, the hardness was 1.8 times more, and the hygroscopicity (after 1 hr. boiling) was 2.6 times lower.We conclude that these differences are mainly due to the unique film structure of the advanced FSG film.

Effect of Doping of Fe into TiO2 Layer in Fe2O3/TiO2/FTO System for High Performance of Water Splitting

2014 ◽  
Vol 93 ◽  
pp. 82-89 ◽  
Author(s):  
Aryan Azad ◽  
Eul Noh ◽  
Kang Seop Yun ◽  
Hee June Jeong ◽  
Sang Chul Jung ◽  
...  
Keyword(s):  
Metal Oxides ◽  
Water Splitting ◽  
High Performance ◽  
Chemical Properties ◽  
Layer By Layer ◽  
Energy Problem ◽  
Dipping Process ◽  
Promising Solution ◽  
Physical And Chemical ◽  
And Chemical Properties

Hydrogen has unique physical and chemical properties which present benefits and challenges to its successful widespread adoption as a fuel. The photoelectrochemical (PEC) water splitting process with semiconductor metal oxides can be a promising solution to the global energy problem. Although amongst metal oxides Fe2O3 by 2.2 eV bang gap energy is more applicable, for reducing the recombination of electron and hole, Fe was doped into TiO2. In this study Fe2O3/Fe doped TiO2 photocatalysts were compared with Fe-doped TiO2 and TiO2 structures by using layer by layer-self-assemble (LBL-SA) method and dipping process on FTO glass. According to our results the Fe2O3 coated on Fe doped TiO2 /FTO has had best results.

High performance graphene embedded rubber composites

RSC Advances ◽  
2015 ◽  
Vol 5 (99) ◽  
pp. 81707-81712 ◽  
Author(s):  
Sung Ho Song ◽  
Jung Mo Kim ◽  
Kwang Hyun Park ◽  
Dong Ju Lee ◽  
O.-Seok Kwon ◽  
...  
Keyword(s):  
High Performance ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Rubber Composites ◽  
Synergy Effects ◽  
Physical And Chemical ◽  
And Chemical Properties

Nano-fillers have provided a big advantage for enhancing the performance of rubber composites through leading the synergy effects in the physical and chemical properties.

Metal Organic Framework Derived Porous Carbon Materials Excels as an Excellent Platform for High-performance Packaged Supercapacitors

Nanoscale ◽  
2021 ◽  
Author(s):  
Xianyu Chu ◽  
Fanling Meng ◽  
Ting Deng ◽  
Wei Zhang
Keyword(s):  
Porous Carbon ◽  
High Performance ◽  
Metal Organic Framework ◽  
Chemical Properties ◽  
Porous Carbon Material ◽  
Metal Organic ◽  
Key Steps ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Organic Framework

Designing and synthesizing new materials with special physical and chemical properties are the key steps to assembling high performance supercapacitors. Metal organic framework (MOF) derived porous carbon material has drawn...

scholarly journals Research of the physical and chemical properties and methods of Red rice (food colour) determination in sausage products

2020 ◽  
Vol 5 (4) ◽  
pp. 23-28
Author(s):  
N. V. Rudometova ◽  
I. S. Kim
Keyword(s):  
Liquid Chromatography ◽  
High Performance ◽  
Chemical Properties ◽  
Carminic Acid ◽  
Physical And Chemical Properties ◽  
Red Rice ◽  
Chromatography Method ◽  
Food Colour ◽  
Physical And Chemical ◽  
And Chemical Properties

In Russia, in the production of meat and sausage products, the food colour, named as Red rice, is use. Red rice is obtain by the cultivation the strains of the Monascus fungus on various carbohydrate substrates, for example rice. That Red rice may contain the mycotoxin citrinin, but neither the purity of the food colour nor the safety profile are regulated. The aim of this work was to study the physical and chemical properties of Red rice and to develop method for its determination in sausage products. The experiments were carried out on model and commercial samples of sausages. The samples were analyzed using spectrophotometry and highefficiency planar and liquid chromatography. Spectrophotometric analysis revealed differences in solubility, coloring power, spectral characteristics, composition and ratio of pigments in commercial samples of Red rice. The extraction parameters of colouring substances from sausages model samples were determined. It has been established that Red rice is extracted with chloroform, acetone, ethanol and its aqueous solutions. Petroleum ether was proposed for degreasing sausages. Red rice from sausages was extracted with acetone because it did not extract synthetic colours and carminic acid. It was found, that 90% of Red rice is extracted from samples of sausages by double extraction with ultrasonic treatment with a power of 128 W. High performance thin layer chromatography method and high performance liquid chromatography method for the Red rice identification was proposed. The content of Red rice in the extracts was determined by spectrophotometric method. The developed method for the determination of Red rice was tested on commercial samples of sausage products.

scholarly journals Wafer-scale two-dimensional platinum monosulfide ultrathin film via metal sulfurization for high performance photoelectronics

2022 ◽  
Author(s):  
Jinbo Pang ◽  
Yanhao Wang ◽  
Xiaoxin Yang ◽  
Lei Zhang ◽  
Yufen Li ◽  
...  
Keyword(s):  
High Performance ◽  
Chemical Properties ◽  
Ultrathin Film ◽  
Physical And Chemical Properties ◽  
Two Dimensional ◽  
Wafer Scale ◽  
Platinum Group Minerals ◽  
Platinum Group ◽  
Physical And Chemical ◽  
And Chemical Properties

2D nonlayered materials have attracted enormous research interests due to their novel physical and chemical properties with the confined dimensions. Platinum sulfide as one of the most common platinum-group minerals...

The Research on Preparation of a New Building Material with EMR and their Properties

2010 ◽  
Vol 163-167 ◽  
pp. 4575-4579 ◽  
Author(s):  
Yong Wang ◽  
Wen Hao Ye ◽  
Heng Bo Liu
Keyword(s):  
Building Material ◽  
High Performance ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Siliceous Material ◽  
Main Components ◽  
Physical And Chemical ◽  
And Chemical Properties

This article describes the physical and chemical properties of EMR and the preparation of a new building material with it. The results show that the main components of EMR are gypsum and quartz, supplemented by a small amount of cement, appropriate siliceous material and quicklime in EMR could be prepared high performance EMR autoclaved brick.

Application of Castor Oil-Based Cutting Fluids in Precision Turning

2011 ◽  
Vol 130-134 ◽  
pp. 3830-3834
Author(s):  
Hong Jie Pei ◽  
Y.J. Shen ◽  
Chun Gen Shen ◽  
Gui Cheng Wang
Keyword(s):  
Development Strategy ◽  
Castor Oil ◽  
High Performance ◽  
Chemical Properties ◽  
National Standards ◽  
Cutting Fluid ◽  
Price Ratio ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Lubricating Properties

Green machining is a process that implements sustainable development strategy. In order to reduce cost and decrease environmental pollution in manufacturing process, a sort of biodegradable castor oil-based emulsion is developed, whose physical and chemical properties can correspond with the national standards. The cooling and lubricating properties of the emulsion are better while machining steel materials through comparative experiments with certain imported commodity synthetic cutting fluid. The emulsion can successfully substitute for commodity fluid because of its high performance-price ratio.

scholarly journals SELECTION OF MINERAL RAW MATERIAL FIELDS FOR GLAUCONITE SORPTION MATERIALS

2021 ◽  
Vol 2021 (1) ◽  
pp. 11-18
Author(s):  
D Xadjibaev ◽  
◽  
F Erkabaev
Keyword(s):  
Industrial Development ◽  
High Performance ◽  
Raw Materials ◽  
Thermal Analyses ◽  
Chemical Properties ◽  
Sorption Process ◽  
Raw Material ◽  
Physical And Chemical Properties ◽  
Physical And Chemical ◽  
And Chemical Properties

Natural minerals, such as bentonite, kaolinite, biotite, vermiculite, and glauconite, which have sufficiently high performance properties in the softening of industrial and waste water, softening and cleaning of heavy metals, are promising. To study the physical and chemical properties of glauconites from various deposits of the country, samples of glauconite mineral were brought from the Parkent, Bukhara, and Karakalpak mountain reserves, their physical and chemical properties were studied, compared with each other, and the optimal reserve was selected. The reserves of these deposits are sufficient and have the potential for industrial development. The purpose of this study is to compare samples of natural mineral reserves of glauconite and select the optimal deposit for raw materials. Methodology. Samples of glauconite minerals from the Parkent, Bukhara and Karakalpak mines were taken as the object of the study. Chemical, mineralogical, and thermal analyses were performed on the samples, and the fractional composition was determined. Scientific novelty. The main part of the mineral glauconite (50-55%) in the raw material is found in fractions of 0.08-0.125 mm. The most suitable raw material was the Parkent glauconite deposit, which has a relatively high content of potassium, which tends to exchange with other metals during the sorption process. The received data. Based on the conducted experiments, samples of glauconites from Parkent, Bukhara, and Karakalpak were subjected to chemical and mineralogical analyses. The maximum amount of the mineral glauconite was found in the fractions of the raw material (less than 0.125 mm). The most suitable deposit of raw materials for processing the mineral glauconite was selected and an environmentally friendly adsorbent was obtained.

High Performance Aromatic Polyethersulfones

2020 ◽  
Vol 869 ◽  
pp. 21-27
Author(s):  
Zakhirat Kh. Sultigova ◽  
Zareta I. Inarkieva ◽  
Rima Ch. Bazheva ◽  
Arsen M. Kharaev ◽  
Madina Yalkhoroeva
Keyword(s):  
Fire Resistance ◽  
Frost Resistance ◽  
High Performance ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Chlorine Atoms ◽  
Unsaturated Bond ◽  
Initial Monomer ◽  
Physical And Chemical ◽  
And Chemical Properties

The modified aromatic polyethersulfones are synthesized. It is shown that the property of the obtained polymers depends on the ratio of the starting monomers. The presence in the initial monomer of two chlorine atoms in combination with an unsaturated bond provides the polyethersulfones based on it with high fire resistance and good physical and chemical properties, including frost resistance.

Performance Photocatalytic Degradation of Methomyl onto Composite Graphene Oxide/Bismuth Vanadate (GO/BiVO4) Nanoparticle

2017 ◽  
Vol 751 ◽  
pp. 701-706 ◽  
Author(s):  
Pusit Pookmanee ◽  
Pimchanok Longchin ◽  
Jitreephan Phanmalee ◽  
Wiyong Kangwansupamonkon ◽  
Sukon Phanichphant
Keyword(s):  
Graphene Oxide ◽  
Photocatalytic Degradation ◽  
High Performance ◽  
Chemical Properties ◽  
Weight Ratio ◽  
Bismuth Vanadate ◽  
Liquid Chromatograph ◽  
X Ray ◽  
Physical And Chemical ◽  
And Chemical Properties

Graphene oxide (GO) powder was synthesized by modified Hummer’s method. Bismuth vanadate (BiVO4) nanoparticle was synthesized by solvothermal method at 100 and 200°C for 3h. Composite graphene oxide and bismuth vanadate (GO/BiVO4) nanoparticle were synthesized by mixed oxide method in weight ratio of 0.20:1.00. The physical and chemical properties were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDS) and surface area analyzer (BET). The photocatalytic degradation of methomyl performance was determined by high performance liquid chromatograph (HPLC). Composite GO/BiVO4 nanoparticle at 200°C for 3h was the highest photocatalytic degradation of methomyl.

Sign in / Sign up

Export Citation Format

Share Document