scholarly journals Development of LaMnO3 and LaNiO3 type materials with calcium doping by the modified proteic method and evaluation for the dye removal efficiency

Cerâmica ◽  
2021 ◽  
Vol 67 (384) ◽  
pp. 406-413
Author(s):  
A. A. Souza ◽  
J. B. R. Fernandes ◽  
J. F. S. Ribeiro ◽  
M. J. B. Souza ◽  
A. M. Garrido Pedrosa
Keyword(s):  
Removal Efficiency ◽  
Dye Removal ◽  
Calcium Doping

Adsorption and Catalysis of Orange II from Wastewater by Inorganic-Organic-Bentonite

2011 ◽  
Vol 340 ◽  
pp. 236-240
Author(s):  
Jian Feng Ma ◽  
Jian Ming Yu ◽  
Bing Ying Cui ◽  
Ding Long Li ◽  
Juan Dai
Keyword(s):  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Dye Removal ◽  
Maximum Adsorption Capacity ◽  
Orange Ii ◽  
Acid Dye ◽  
Secondary Pollution ◽  
Organic Bentonite ◽  
Maximum Removal

Inorganic-organic-bentonite was synthesized by modification of bentonite by Hydroxy-iron and surfactant, which could be applied in dye removal by adsorption and catalysis. The removal of acid dye Orange II was studied at various factors such as time and pH of solution. The results showed that the inorganic-organic-bentonite could efficiently remove the dye with efficiency of 96.22%. The maximum adsorption capacity is 76 mg/g. The pH of solution has significant effect on both adsorption and catalysis. When pH was 4, the maximum removal efficiency of adsorption and catalysis were 97.57% and 87.23%, respectively. After degradation, the secondary pollution was diminished and the bentonite could be reused.

scholarly journals Removal of Methylene Blue and Congo Red Using Adsorptive Membrane Impregnated with Dried Ulva fasciata and Sargassum dentifolium

Plants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 384
Author(s):  
Ahmed Labena ◽  
Ahmed E. Abdelhamid ◽  
Abeer S. Amin ◽  
Shimaa Husien ◽  
Liqaa Hamid ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Removal Efficiency ◽  
Congo Red ◽  
Dye Removal ◽  
Industrial Effluents ◽  
Composite Membranes ◽  
Acrylic Fiber ◽  
Ulva Fasciata ◽  
Ft Ir ◽  
Sorption Time

Biosorption is a bioremediation approach for the removal of harmful dyes from industrial effluents using biological materials. This study investigated Methylene blue (M. blue) and Congo red (C. red) biosorption from model aqueous solutions by two marine macro-algae, Ulva fasciata and Sargassum dentifolium, incorporated within acrylic fiber waste to form composite membranes, Acrylic fiber-U. fasciata (AF-U) and Acrylic fiber-S. dentifolium (AF-S), respectively. The adsorption process was designed to more easily achieve the 3R process, i.e., removal, recovery, and reuse. The process of optimization was implemented through one factor at a time (OFAT) experiments, followed by a factorial design experiment to achieve the highest dye removal efficiency. Furthermore, isotherm and kinetics studies were undertaken to determine the reaction nature. FT-IR and SEM analyses were performed to investigate the properties of the membrane. The AF-U membrane showed a significant dye removal efficiency, of 88.9% for 100 ppm M. blue conc. and 79.6% for 50 ppm C. red conc. after 240 min sorption time. AF-S recorded a sorption capacity of 82.1% for 100 ppm M. blue conc. after 30 min sorption time and 85% for 100 ppm C. red conc. after 240 min contact time. The membranes were successfully applied in the 3Rs process, in which it was found that the membranes could be used for five cycles of the removal process with stable efficiency.

scholarly journals Acid Blue 25 Removal by using Electro-Persulfate Process

2020 ◽  
Author(s):  
Zeinab Ghorbani
Keyword(s):  
Aqueous Solution ◽  
Removal Efficiency ◽  
Salt Concentration ◽  
Dye Removal ◽  
Industrial Effluents ◽  
Sodium Persulfate ◽  
Initial Concentration ◽  
Acid Blue 25 ◽  
Sulfate Process ◽  
Acid Blue

This study aimed to investigate the efficiency of the electro-persulfate process in removing acid blue 25 from aqueous solution. In order to optimize the parameters, the OFAT method was used, and the effect of three main parameters, including pH, sodium persulfate salt concentration, and current intensity was investigated. According to the results, the optimal removal efficiency of 94% in 60 minutes was obtained under conditions of pH=5, the initial concentration of sodium persulfate=250 mg / L, and the current=500 mA. According to the results of this study, the electro-persulfate process sulfate process can be an efficient process for dye removal from industrial effluents.

scholarly journals Effect of Praestol as a Coagulant-Aid to Improve Coagulation-Flocculation in Dye containing Wastewaters

2015 ◽  
Vol 18 (1) ◽  
pp. 38-46 ◽  
Keyword(s):  
Ionic Strength ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Dye Removal ◽  
Settling Time ◽  
Solution Ph ◽  
Polyaluminum Chloride ◽  
Flocculation Process ◽  
Flocculation Time

<div> <p>This study was conducted to investigate the effect of praestol, as a coagulant-aid, to improve coagulation-flocculation process in the removal of disperse red 60 from aqueous solutions. The effect of various parameters including coagulants dose (10-1000 mg l<sup>-1</sup>), praestol dose (0-1000 mg l<sup>-1</sup>), solution pH (3-11), initial dye concentration (100-500 mg l<sup>-1</sup>), flocculation speed (30-60 rpm), flocculation time (15-30 min), settling time (5-60 min) and ionic strength (0-6 mg l<sup>-1</sup>) was evaluated on the dye removal. The dye removal efficiency was substantially increased by using praestol in the concentration of 80 mg l<sup>-1 </sup>and 400 mg l<sup>-1 </sup>for coagulation with alum and polyaluminum chloride (PACl), respectively. The maximum dye removal by alum coupled with praestol (Al-P) and PACl coupled with praestol (PA-P) was found to be 97.8% and 98.7%, respectively that were occurred at pH 7. The results showed that the application of PA-P or Al-P can be effectively used to remove disperse red 60 (DR 60) in aqueous solutions.</p> </div> <p>&nbsp;</p>

scholarly journals Degradation of a Leather-Dye by the Combination of Depolymerised Wood-Chip Biochar Adsorption and Solid-State Fermentation with Trametes Villosa SCS-10

2020 ◽  
Author(s):  
Santiago Ortiz Monsalve ◽  
Mariliz Gutterres ◽  
Patrícia Valente ◽  
Jersson Plácido ◽  
Sandra Bustamante-López ◽  
...  
Keyword(s):  
Solid State ◽  
Removal Efficiency ◽  
Dye Removal ◽  
Combined Treatment ◽  
Wood Chip ◽  
Untreated Wood ◽  
Initial Assessment ◽  
Solid Matrix ◽  
Malt Extract ◽  
Leather Industry

Abstract Adsorption into biochar-derived materials and mycoremediation are promising technologies for removing dyes from solid and liquid matrices. This study presents a combined treatment with adsorption into wood-chip biochar and mycodegradation under solid-state ermentation by Trametes villosa for removing the leather-dye Acid Blue 161. In the first stage, untreated wood-chip biochar, NaOH-depolymerised-biochar and KMnO 4 -depolymerised-biochar were assessed for their dye removal efficiency by adsorption. KMnO 4 -depolymerised-biochar exhibited the highest adsorption (85.1 ± 1.9%) after 24 h of contact. KMnO 4 -depolymerisation modified some physical and chemical properties on the untreated wood-chip biochar, increasing the surface area (50.4 m 2 g –1 ), pore size (1.9 nm), and resence of surface functional groups. Response Surface Methodology coupled with a Box-Behnken design was used to optimise the AB 161 adsorption into the KMnO 4 -depolymerised-biochar. The optimised conditions, pH 3.0, dye concentration 100 mg L –1 and sorbent dosage 2 g L –1 , led to a higher dye removal efficiency by adsorption (91.9 ± 1.0%). In a second stage, the wood-chip biochar supplemented with nutrients (1% malt extract and 0.5% peptone) was employed as a solid matrix for growing T. villosa and regenerating the dye-saturated material. After 15 days, T. villosa was able to grow (86.8 ± 0.8%), produce Laccase activity (621.9 ± 62.3 U L –1 ), and biodegrade (91.4 ± 1.3%) the dye adsorbed into the KMnO 4 -depolymerised-biochar. Finally, the mycoregenerated was reutilised in a new cycle of adsorption reaching 79.5 ± 2.0% of dye removal efficiency by adsorption. This study revealed the potential of the combined treatment and is an initial assessment for developing commercial alternatives for treating leather industry wastewaters.

scholarly journals Study of C.I. Acid Orange 7 removal in contaminated water by photo oxidation processes

2013 ◽  
Vol 10 (1) ◽  
pp. 16-23 ◽  
Keyword(s):  
Removal Efficiency ◽  
Uv Irradiation ◽  
Rate Constant ◽  
Dye Removal ◽  
Irradiation Time ◽  
Inhibitory Effect ◽  
Textile Dye ◽  
Acid Orange 7 ◽  
Acid Orange ◽  
First Order

C.I. Acid Orange 7 (AO7) commonly used as a textile dye and could be degraded by UV/ZnO, UV/H2O2 and UV/H2O2/Fe (III) (photofenton) processes. In the photocatalytic degradation of dye by UV/ZnO process, effect of some parameters such as UV irradiation time, presence of ZnO and UV irradiation, pH, concentrations of ZnO, dye, H2O2 and ethanol was examined and first order reaction rate constant was calculated equal to 2.39×10-2 min-1 at experimental condition. The semi-log plot of dye concentration versus time was linear, suggesting first order reaction. Efficiency of photodegradation process in the absence of ZnO photocatalyst and UV light was small. Increasing the UV irradiation time increased AO7 removal. Ethanol had inhibitory effect on this process. Maximum AO7 removal was seen at neutral pH area. In the UV/H2O2 process, effect of some parameters such as presence of H2O2 and UV irradiation, amount of H2O2, effect of pH and addition of bicarbonate on the efficiency of dye removal were examined. Absence of each of UV irradiation or H2O2 decreased AO7 removal efficiency near to zero. Increasing H2O2 concentration increased dye removal to some extent but at higher H2O2 concentrations, dye removal efficiency did not increase. Increasing pH to value about 9 increased the AO7 removal efficiency and increasing bicarbonate anion concentration decreased it. Rate constant of AO7 removal by this process was calculated to be equal to 4.221×10-1 min-1 at experimental condition. Also, the order of UV/ H2O2/Fe (III) > UV/ H2O2 > UV/Fe (III) > H2O2/Fe (III), was seen for AO7 removal efficiency of these processes. Increasing Fe (III) and oxalate concentration increased dye removal efficiency.

scholarly journals The effect of iron doping on ZnO catalyst on dye removal efficiency

2020 ◽  
Vol 476 ◽  
pp. 012108
Author(s):  
T Tzewei ◽  
A H Ibrahim ◽  
C Z A Abidin ◽  
F M Ridwan
Keyword(s):  
Removal Efficiency ◽  
Dye Removal ◽  
Iron Doping

Decolorization of Reactive Brilliant Red X-3B Simulated Dye Water by Novel Coagulants

2013 ◽  
Vol 743-744 ◽  
pp. 665-668
Author(s):  
Ji Zhou Li ◽  
Xu Yin Yuan ◽  
Ming Tian ◽  
Hao Ran Ji ◽  
Wan Jiang
Keyword(s):  
Removal Efficiency ◽  
Dye Removal ◽  
Color Removal ◽  
Solution Temperature ◽  
Maximum Efficiency ◽  
Coagulant Dosage ◽  
Decolorization Efficiency ◽  
Initial Ph ◽  
Simulated Wastewater ◽  
Ph Range

Five novel coagulants, DC-491, Fennofix K97, BWD-01, MD-03 and MD-04 were chosen to treat reactive brilliant red X-3B simulated wastewater by jar tests. The results showed that the decolorization efficiencies were all higher than 75% at initial pH 8.2 and temperature 20 after 20 minutes of reaction. Then, two typical coagulants, BWD-01 and MD-04 which had better performance were chosen to study the effect of dye removal of X-3B at different operating parameters, including coagulant dosage, pH, sedimentaion time and reaction temperature of simulated wastewater. Decolorization efficiency of MD-04 for X-3B solution was higher than 80% in pH range from 3 to 9, while for BWD-01, efficiency increased from 37.3% to 82.3% in this pH range. For both BWD-01 and MD-04, the color removal efficiency increased as the solution temperature increased and the maximum efficiency was over 94% at 40. Small changes in the color removal efficiency were observed after 1 hour sedimentation for both coagulants.

Sign in / Sign up

Export Citation Format

Share Document