scholarly journals Acoustic Characterization of Sugarcane Bagasse Particleboard Panels (Saccharum officinarum L)

2015 ◽  
Vol 18 (4) ◽  
pp. 821-827 ◽  
Author(s):  
Sylvia Thais Martins Carvalho ◽  
Lourival Marin Mendes ◽  
Antonia Amanda da Silva Cesar ◽  
Jeimy Blanco Flórez ◽  
Fábio Akira Mori ◽  
...  
1997 ◽  
Author(s):  
Anatoliy N. Ivakin ◽  
Darrell R. Jackson

2017 ◽  
Vol 122 (8) ◽  
pp. 084103 ◽  
Author(s):  
E. Smirnova ◽  
A. Sotnikov ◽  
S. Ktitorov ◽  
H. Schmidt

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Haifeng Yan ◽  
Huiwen Zhou ◽  
Hanmin Luo ◽  
Yegeng Fan ◽  
Zhongfeng Zhou ◽  
...  

Abstract Background Although extensive breeding efforts are ongoing in sugarcane (Saccharum officinarum L.), the average yield is far below the theoretical potential. Tillering is an important component of sugarcane yield, however, the molecular mechanism underlying tiller development is still elusive. The limited genomic data in sugarcane, particularly due to its complex and large genome, has hindered in-depth molecular studies. Results Herein, we generated full-length (FL) transcriptome from developing leaf and tiller bud samples based on PacBio Iso-Seq. In addition, we performed RNA-seq from tiller bud samples at three developmental stages (T0, T1 and T2) to uncover key genes and biological pathways involved in sugarcane tiller development. In total, 30,360 and 20,088 high-quality non-redundant isoforms were identified in leaf and tiller bud samples, respectively, representing 41,109 unique isoforms in sugarcane. Likewise, we identified 1063 and 1037 alternative splicing events identified in leaf and tiller bud samples, respectively. We predicted the presence of coding sequence for 40,343 isoforms, 98% of which was successfully annotated. Comparison with previous FL transcriptomes in sugarcane revealed 2963 unreported isoforms. In addition, we characterized 14,946 SSRs from 11,700 transcripts and 310 lncRNAs. By integrating RNA-seq with the FL transcriptome, 468 and 57 differentially expressed genes (DEG) were identified in T1vsT0 and T2vsT0, respectively. Strong up-regulation of several pyruvate phosphate dikinase and phosphoenolpyruvate carboxylase genes suggests enhanced carbon fixation and protein synthesis to facilitate tiller growth. Similarly, up-regulation of linoleate 9S-lipoxygenase and lipoxygenase genes in the linoleic acid metabolism pathway suggests high synthesis of key oxylipins involved in tiller growth and development. Conclusions Collectively, we have enriched the genomic data available in sugarcane and provided candidate genes for manipulating tiller formation and development, towards productivity enhancement in sugarcane.


2021 ◽  
pp. 004051752110238
Author(s):  
Oluwafemi P Akinmolayan ◽  
James M Manimala

Silica nanoparticle-impregnated Kevlar (SNK) fabric has better specific ballistic performance in comparison to its neat counterparts. For multifunctional structural applications using lightweight composites, combining this improved ballistic functionality with an acoustic functionality is desirable. In this study, acoustic characterization of neat and SNK samples is conducted using the normal-incidence impedance tube method. Both the absorption coefficient and transmission loss (TL) are measured in the 60–6000 Hz frequency range. The influence of parameters such as number of layers of neat or treated fabric, percentage by weight of nanoparticle addition, spacing between fabric layers, and residual porosity is examined. It is found that while absorption decreases with an increase in nanoparticle addition for frequencies above about 2500 Hz, increasing the number of layers shifts peak absorption to lower frequencies. By introducing an air-gap behind the fabric layer, dominant low-frequency (1000–3000 Hz) absorption peaks are obtained that correlate well with natural modes of mass-equivalent thin plates. Examining the influence of residual porosity by laminating the SNK samples reveals that it contributes to about 30–50% of the total absorption. Above about 1500 Hz, 3–5 dB of TL increase is obtained for SNK samples vis-à-vis the neat samples. TL is found to increase beyond that of the neat sample above a threshold frequency when an air-gap is introduced between two SNK layers. With an increase in the weight of nanoparticle addition, measured TL tends to be closer to mass law predictions. This study demonstrates that SNK fabric could provide improved acoustic performance in addition to its ballistic capabilities, making it suitable for multifunctional applications and could form the basis for the development of simplified models to predict the structural acoustic response of such nanoparticle–fabric composites.


2021 ◽  
Vol 11 (13) ◽  
pp. 5924
Author(s):  
Elisa Levi ◽  
Simona Sgarbi ◽  
Edoardo Alessio Piana

From a circular economy perspective, the acoustic characterization of steelwork by-products is a topic worth investigating, especially because little or no literature can be found on this subject. The possibility to reuse and add value to a large amount of this kind of waste material can lead to significant economic and environmental benefits. Once properly analyzed and optimized, these by-products can become a valuable alternative to conventional materials for noise control applications. The main acoustic properties of these materials can be investigated by means of a four-microphone impedance tube. Through an inverse technique, it is then possible to derive some non-acoustic properties of interest, useful to physically characterize the structure of the materials. The inverse method adopted in this paper is founded on the Johnson–Champoux–Allard model and uses a standard minimization procedure based on the difference between the sound absorption coefficients obtained experimentally and predicted by the Johnson–Champoux–Allard model. The results obtained are consistent with other literature data for similar materials. The knowledge of the physical parameters retrieved applying this technique (porosity, airflow resistivity, tortuosity, viscous and thermal characteristic length) is fundamental for the acoustic optimization of the porous materials in the case of future applications.


Author(s):  
Paolo La Torraca ◽  
Luca Larcher ◽  
Paolo Lugli ◽  
Marco Bobinger ◽  
Francisco J. Romero ◽  
...  

DYNA ◽  
2019 ◽  
Vol 86 (210) ◽  
pp. 98-107
Author(s):  
Luz Marina Flórez Pardo ◽  
Andrea González Córdoba ◽  
Jorge Enrique López Galán

In this research, the types of hemicellulose that predominate in the leaves and tops of the three most cultivated varieties (CC 8475, CC 8592, V 7151) of sugarcane (Saccharum officinarum L.) in Valle del Cauca, Colombia were determined. Hemicellulose analyses were performed after delignification with sodium chlorite and extraction with 18% NaOH and 24% KOH containing 0.26 M NaBH4. The main components of hemicellulose were identified via FTIR and NMR spectroscopy, and monomeric sugars were identified via HPLC. Hemicellulose A composed of arabinoxylans, glucomannans and arabinogalactactans and hemicellulose B primarily composed of arabinoxylans were extracted. The hemicelluloses of the Colombian varieties were more stable against heat than those of the Venezuelan variety. The results of this project allowed discovery of the potential use of agricultural sugarcane residues for bioethanol production because they have a holocellulose content of more than 60%.


Sign in / Sign up

Export Citation Format

Share Document