This paper presents the feasibility of developing an electromechanical in-situ viscosity measurement technique by analyzing the detectability of small variations in the viscosity of different shear thickening fluids and their different compositions. Shear thickening fluid (STF) is a kind of non-Newtonian fluid showing an increasing viscosity profile under loading. STF is utilized in several applications to take advantage of its tunable rheology. However, process control in different STF applications requires rheological measurements, which cause a costly investment and long-lasting labor. Therefore, one of the most commonly used in-situ structural health monitoring techniques, electromechanical impedance (EMI), was used in this study. In order to actuate the medium electromechanically, a piezoelectric wafer active sensor (PWAS) was used. The variations in the spectral response of PWAS resonator that can be submerged into shear thickening fluid are analyzed by the root mean square deviation, mean absolute percentage deviation and correlation coefficient deviation. According to the results, EMI metrics provide good correlations with the rheological parameters of STF and thereby enabling quick and low-cost rheological control for STF applications such as vibration dampers or stiffness control systems.
Rheological Parameters of Shear-Thickening Fluids Using an Experimental Design
