Dynamic compressive response of 3D GFRP composites with shear thickening fluid (STF) matrix as cushioning materials

2021 ◽  
pp. 002199832098424
Author(s):  
Mohsen Jeddi ◽  
Mojtaba Yazdani
Keyword(s):  
Shear Thickening ◽  
Low Velocity Impact ◽  
Gfrp Composites ◽  
High Concentration ◽  
Low Velocity ◽  
Shear Thickening Fluid ◽  
Compressive Response ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Shear Thickening Fluids

Whereas most previous studies have focused on improving the penetration resistance of Shear Thickening Fluids (STFs) treated composites, in this study, the dynamic compressive response of single and multi-ply 3 D E-Glass Fiber Reinforced Polymer (GFRP) composites with the STF matrix was investigated by using a drop-weight low-velocity impact test. The experimental results revealed the STF improved the compressive and cushioning performance of the composites such that with increasing its concentration, further improvement was observed. The five-ply composite containing the STF of 30 wt% silica nanoparticles and 1 wt% carbon nanotubes (CNTs) reduced the applied peak force by 56% and 26% compared to a steel plate and five-ply neat samples, respectively. A series of repeated impacts was performed, and it was found that the performance of high-concentration composites is further decreased under this type of loading.

scholarly journals Experimental and numerical analysis of high and low velocity impacts against neat and shear thickening fluid (STF) impregnated weave fabrics

2018 ◽  
Vol 183 ◽  
pp. 01044
Author(s):  
Djalel Eddine Tria ◽  
Larbi Hemmouche ◽  
Abdelhadi Allal ◽  
Abdelkader Benouali
Keyword(s):  
High Velocity ◽  
Shear Thickening ◽  
Force Sensor ◽  
Low Velocity Impact ◽  
Dynamic Force ◽  
Low Velocity ◽  
Shear Thickening Fluid ◽  
Velocity Impact ◽  
Pull Out ◽  
The Impact

This investigation aims to study the efficiency of STF impregnated plain-weave fabric made of Kevlar under high and low velocity impact conditions. The shear thickening fluid (STF) was prepared by ultrasound irradiation of silica nanoparticles (diameter ≈30 nm) dispersed in liquid polyethylene glycol polymer. STF impregnation effect was determined from single yarn pull-out test and penetration at low velocity using drop weight machine equipped with hemi-spherical penetrator and dynamic force sensor. Force-displacement curves of neat and impregnated Kevlar were analysed and compared. Also, the STF impregnation effect on Kevlar multilayers was analysed from high velocity impact tests using 9mm FMJ bullet at 390 m/s. After impact, Back face deformation (BFD) of neat and impregnated Kevlar layers were measured and compared. Results showed that STF impregnated fabrics have better energy absorption and penetration resistance as compared to neat fabrics without affecting the fabric flexibility. When relative yarn translations are restricted (e.g. at very high levels of friction), windowing and yarn pull-out cannot occur, and the fibres engaged with the projectile fail in tension that leads to fabric penetration. Microscopy of these fabrics after testing have shown pitting and damage to the Kevlar filaments caused by the hard silica particles used in the STF. Mesoscopic 3D Finite Element models were developed using explicit LS-DYNA hydrocode to account for STF impregnation by employing the experimental results of yarn pull-out tests, low and high velocity impacts. It was found that friction between fibers and yarns increase the dissipation of energy upon impact by restricting fiber mobility, increasing the energy required for relative yarn translations and transferring the impact energy to a larger number of fibers.

An investigation on composite laminates including shear thickening fluid under stab condition

2018 ◽  
Vol 53 (8) ◽  
pp. 1111-1122 ◽  
Author(s):  
Selim Gürgen
Keyword(s):  
Energy Absorption ◽  
Composite Laminates ◽  
Impact Resistance ◽  
Shear Thickening ◽  
Low Velocity ◽  
Shear Thickening Fluid ◽  
Shear Thickening Fluids ◽  
Absorption Performance ◽  
Thickening Behavior ◽  
The Impact

Shear thickening fluids have been extensively utilized in composite laminate structures to enhance the impact resistance in the last decade. Despite the contribution of shear thickening fluids to the protective systems, the mechanism behind the energy absorption behavior of shear thickening fluids is not fully understood. In the present study, various configurations of composite laminates were prepared and these structures were investigated under low velocity stab conditions. Contrary to the common idea of shear thickening fluid impregnation for fabrics, shear thickening fluids were used in bulk form and by means of this, pure contribution of shear thickening behavior to the energy absorption was investigated. To hold the bulk shear thickening fluids in the composite laminates, Lantor Soric SF honeycomb layers were filled with shear thickening fluids and Twaron fabrics were plied in the structures as the reinforcement. As a result of this study, it is stated that shear thickening behavior is insufficient to effectively improve the energy absorption performance of composite laminates; however, shear thickening fluids are beneficial to fabric based composites because the inter-yarn friction of fabrics is enhanced using shear thickening fluids as an impregnation agent rather than a bulk form.

Sign in / Sign up

Export Citation Format

Share Document