scholarly journals In vitro analysis of shear bond strength and adhesive remnant index of different metal brackets

2016 ◽  
Vol 21 (6) ◽  
pp. 67-73 ◽  
Author(s):  
Fernanda de Souza Henkin ◽  
Érika de Oliveira Dias de Macêdo ◽  
Karoline da Silva Santos ◽  
Marília Schwarzbach ◽  
Susana Maria Werner Samuel ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Fold Increase ◽  
Optical Microscope ◽  
General Evaluation ◽  
Adhesive Remnant Index ◽  
The One ◽  
Vitro Analysis ◽  
In Vitro Analysis

ABSTRACT Introduction: There is a great variety of orthodontic brackets in the Brazilian market, and constantly evaluating them is critical for professionals to know their properties, so as to be able to choose which product best suits their clinical practice. Objectives: To evaluate the bond strength and the adhesive remnant index (ARI) of different brands of metal brackets. Material and Methods: A total of 105 bovine incisors were used, and brackets of different brands were bonded to teeth. Seven different bracket brands were tested (MorelliTM, American OrthodonticsTM, TP OrthodonticsTM, Abzil-3MTM, OrthometricTM, TecnidentTM and UNIDENTM). Twenty-four hours after bonding, shear bond strength test was performed; and after debonding, the ARI was determined by using an optical microscope at a 10-fold increase. Results: Mean shear bond strength values ranged from 3.845 ± 3.997 (MorelliTM) to 9.871 ± 5.106 MPa (TecnidentTM). The majority of the ARI index scores was 0 and 1. Conclusion: Among the evaluated brackets, the one with the lowest mean shear bond strength values was MorelliTM. General evaluation of groups indicated that a greater number of bond failure occurred at the enamel/adhesive interface.

scholarly journals An in-vitro analysis of shear bond strength of resin based luting cements to lithium disilicate glass ceramic

2019 ◽  
Vol 5 (2) ◽  
pp. 23-27
Author(s):  
K Premnath ◽  
◽  
Nagaranjani Prakash ◽  
Mohammed Ajmal B ◽  
Syed Ahmed Raheel ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Ceramic ◽  
Shear Bond Strength ◽  
Lithium Disilicate ◽  
Luting Cements ◽  
Vitro Analysis ◽  
In Vitro Analysis

scholarly journals Shear bond strength evaluation of bonded molar tubes on fluorotic molars

2012 ◽  
Vol 83 (1) ◽  
pp. 152-157 ◽  
Author(s):  
Erika L. Silva-Benítez ◽  
Veronica Zavala-Alonso ◽  
Gabriel A. Martinez-Castanon ◽  
Juan P. Loyola-Rodriguez ◽  
Nuria Patiño-Marin ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Dental Fluorosis ◽  
In Vitro Study ◽  
Mean Value ◽  
Fixed Appliance ◽  
Adhesive Remnant Index ◽  
The Mean ◽  
Electronic Microscope

Abstract Objective: To study the shear bond strength (SBS), sites of failure, and micromorphology of bonded molar tubes used on teeth affected by dental fluorosis. Materials and Methods: This in vitro study included 140 first molars classified according to Dean's index for dental fluorosis. Samples were divided into seven groups: (1) healthy teeth etched for 15 seconds, (2) teeth with moderate fluorosis (MOF) etched for 15 seconds, (3) teeth with MOF etched for 150 seconds, (4) teeth with MOF microabrasion etched for 15 seconds, (5) teeth with severe fluorosis (SEF) etched for 15 seconds, (6) teeth with SEF etched for 150 seconds, and (7) teeth with SEF microabrasion etched for 15 seconds. All samples were incubated and were then submitted to the SBS test and evaluated with the modified adhesive remnant index (ARI) and analyzed by using a scanning electronic microscope. Results: The SBS mean value for healthy enamel was 20 ± 10.2 MPa. For the group with MOF, the etched 150-second mean value was the highest (19 ± 7.6 MPa); for the group with SEF treated with microabrasion and etched for 15 seconds, the mean value was (13 ± 4.1 MPa). Significant differences (P ≤ .05) were found in the ARI between healthy and fluorosed groups. Conclusions: Fluorotic enamel affects the adhesion of bonded molar tubes. The use of overetching in cases of MOF and the combination of microabrasion and etching in SEF provides a suitable adhesion for fixed appliance therapy.

Comparative evaluation of shear bond strength of composite to dentin in presence of different dental liners: An in-vitro study

2021 ◽  
Author(s):  
Ladan Ranjbar Omrani ◽  
Saba Tohidkhah ◽  
Elham Ahmadi ◽  
Mahdi Abbasi ◽  
Reza Morvaridi Farimani
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Control Group ◽  
The One ◽  
Post Hoc

Abstract Background: The aim of the current study was to evaluate and compare the influence of Dycal, Lime-lite, Theracal LC, Biodentine, Resin-modified glass ionomer cement (RMGIC), and Activa Bioactive as the pulp capping material on the shear bond strength of resin composite to dentin.Methods: A total of 70 extracted caries-free molars were randomly assigned to seven groups. Six test groups were covered with various protective liners: Dycal (GD), Theracal LC (GT), lime-lite (GL), Activa Bioactive (GA), Biodentine (GB), RMGIC (GR). The control group (GC)received no liner pretreatment. Each sample was bonded to resin composite using the total-etch tetric N bond adhesive. The samples were then tested for shear bond strength using the universal testing machine at a cross-head speed of 1 mm/min until bond failure occurred. The data were analyzed using the one-way ANOVA test followed by the Tamhane post-hoc test for pairwise comparisons of the groupsResults: Independent of the type of the applied liner, all groups exhibited inferior SBS to dentine compared to the control group. GT and GR showed significantly higher shear bond strength than GB and GD, which showed the lowest shear bond strength. GL and GA also had significantly lower SBS results than GT. The mode of fracture was predominantly cohesive in GD, GB, and GT and adhesive in GA.Conclusion: This present study concludes that the bond strength of resin-composite to dentine can be affected differently using various types of liners.

scholarly journals Assessment of the Bond Strength and Mode of Failure of Glass Fibre Posts Luted using Two Different Adhesives: An In Vitro Analysis

2018 ◽  
Vol 3 (2) ◽  
pp. 57-62
Author(s):  
Iswariya Rajan ◽  
Vaiyapuri Ravi ◽  
Arthanarieswaran A Sivakumar ◽  
Jambai SK Sivakumar ◽  
Anjaneya S Prasad ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fibre ◽  
Mode Of Failure ◽  
Vitro Analysis ◽  
Glass Fibre Posts ◽  
In Vitro Analysis
Sign in / Sign up

Export Citation Format

Share Document