scholarly journals Majors soil classes of the metropolitan region of Curitiba (PR), Brazil: II - interaction of Pb with mineral and organic constituents

2007 ◽  
Vol 50 (2) ◽  
pp. 183-192 ◽  
Author(s):  
Ana Christina Duarte Pires ◽  
Vander de Freitas Melo ◽  
Antônio Carlos Vargas Motta ◽  
Valmiqui Costa Lima
Keyword(s):  
Water Pollution ◽  
Heavy Metals ◽  
Organic Matter ◽  
Metropolitan Region ◽  
Maximum Adsorption Capacity ◽  
Leaching Potential ◽  
Ground Water Pollution ◽  
Factors Influencing ◽  
Plastic Bags ◽  
Soil Constituents

The interaction between heavy metals and soil constituents is one of the most important factors influencing the potential for ground water pollution. To study Pb behavior, samples of soils were incubated with a salt solution containing this metal. The experimental units consisted of plastic bags, partially opened with 0.1 dm³ of soil with three replications. After incubation, samples were subjected to sequential and selective extractions. Lead retention, measured by the maximum adsorption capacity of the soil, was relatively high with values ranging from 6,439 to 22,148 mg kg-1. The sequential and selective extractions showed that Pb adsorption was stable where the metal was found mainly in organic matter, Fe and Al oxides, and residual forms (specific adsorption). The capacity of the soils to retain Pb, thereby increasing the leaching potential of the metal, was in the sequence of: Histosol - Oxisol - Inceptisol.

A Study to the Factors Influencing the Plants' Absorption of Heavy Metals

2013 ◽  
Vol 743-744 ◽  
pp. 491-497
Author(s):  
Jie Ying Huang ◽  
Xiao Chun Xu ◽  
Li Wei Chen ◽  
Yuan Xiang Zhou
Keyword(s):  
Heavy Metals ◽  
Organic Matter ◽  
Soil Structure ◽  
Ph Value ◽  
Physicochemical Characteristics ◽  
Significant Inhibition ◽  
Inhibition Effect ◽  
Factors Influencing ◽  
Significant Difference ◽  
Adhesive Effect

In order to master the rule of heavy metals migration on the interface of tailings-plants and how matrix physicochemical characteristics change, pot experiment was conducted with/without soil, choosing PAM and EDTA as tailings modifiers, with/ without organic matter. The results showed that: the existence of soil inhibited the absorption of heavy metals, especially for Cu, to which significant inhibition effect has been achieved,join of EDTA and PAM could further restrained the leafy plants to absorb heavy metals. The experimental results also indicated that PAM had a significantly adhesive effect on soil particles than EDTA,improved the soil structure to a certain role,each matrix pH value varies between 7-8, and there are no significant difference between PAM and EDTA processing matrix.

Parameters Affecting Dye Adsorption - Using Graphene Coated Sand (GSC)

2018 ◽  
Vol 4 (02) ◽  
Author(s):  
Seroor Atalah Khaleefa Alia ◽  
Dr. Mohammed Ibrahimb ◽  
Hussein Ali Hussein
Keyword(s):  
Heavy Metals ◽  
Contact Time ◽  
Organic Dyes ◽  
Low Cost ◽  
Dye Adsorption ◽  
Contaminated Water ◽  
Maximum Adsorption Capacity ◽  
Engineering Designs ◽  
Heavy Metals Ions ◽  
Coated Sand

Adsorption is most commonly applied process for the removal of pollutants such as dyes and heavy metals ions from wastewater. The present work talks about preparing graphenic material attached sand grains called graphene sand composite (GSC) by using ordinary sugar as a carbon source. Physical morphology and chemical composition of GSC was examined by using (FTIR, SEM, EDAX and XRD). Efficiency of GSC in the adsorption of organic dyes from water was investigated using reactive green dye with different parameters such as (ph, temperature, contact time and dose). Adsorption isotherm was also studied and the results showed that the maximum adsorption capacity of dye is 28.98 mg/g. This fast, low-cost process can be used to manufacture commercial filters to treat contaminated water using appropriate engineering designs.

The Issue of Plastic and Microplastic Pollution in Soil

2019 ◽  
Vol 56 (3) ◽  
pp. 484-487 ◽  
Author(s):  
Valentina Constanta Tudor ◽  
Dorina Nicoleta Mocuta ◽  
Ruxandra Florina Teodorescu ◽  
Dragos Ion Smedescu
Keyword(s):  
Water Pollution ◽  
Organic Matter ◽  
Soil Pollution ◽  
Aquatic Environment ◽  
Negative Impact ◽  
Plastic Material ◽  
Soil Biota ◽  
Toxic Substances

Soil pollution with plastics represents a great threat to plants, animals, but especially to humans, as a very small quantity of the plastic which is discarded daily is recycled or incinerated in waste facilities, much of it reaching landfills where their decomposition lasts up to 1000 years and during this time the toxic substances penetrate the soil and the water. If, initially, the pollution with plastics has been identified and recognized in the aquatic environment, recent studies show that plastics residues exist in huge quantities in the soil. The present study focuses on the analysis of factors that pollute soil, so the various studies that have been carried out claim that soil pollution with plastic is much higher and increases in an aggressive manner, being estimated to be 4 to 23 times higher than water pollution with plastics, and the accumulation of microplastics in the soil has a negative impact on soil biota. Thus, once the plastic material accumulates in the soil, it is assimilated to organic matter and the mineral substitutes of the soil and persists for several hundred years.

Stability of Ceramic Glazes Obtained by Valorification of Anorganic Pigments Extracted from Electroplating Sludge

2018 ◽  
Vol 69 (3) ◽  
pp. 571-574
Author(s):  
Mihaela Andreea Mitiu ◽  
Maria Iuliana Marcus ◽  
Maria Vlad ◽  
Cristina Mihaela Balaceanu
Keyword(s):  
Heavy Metals ◽  
Leaching Tests ◽  
Ceramic Tiles ◽  
Research Activity ◽  
Limit Values ◽  
Leaching Potential ◽  
International Standard ◽  
Ceramic Samples ◽  
Electroplating Sludge ◽  
The Stability

This paper presents the results of the research activity in order to etablish the stability and leaching potential of ceramic tiles which have been developed using glazes colored with pigments obtained by the extraction of chromium and iron metals from electroplating sludge. All these ceramic tiles contain various amounts of heavy metals in their glazes due to the pigments composition. The ceramic samples have been subjected to leaching tests in order to detect if various elements of relevance such as chromium, lead, cadmium, zinc or iron migrated to any great extent into test solutions. Leaching tests have been performed following the international standard SR ISO 10545-15 method for specific metals leaching into 4% acetic acid solutions at 220C after a 24h period and the international standard SR EN 12457/1-4 method with distilled water as leaching agent at LSR of 10 l/kg, for 24h period. Amounts of heavy metals have been negligible or non-detectable (iron) in the leaching solutions, being well below the limit values established by the legislation in force.

Strategies for Condition Assessment of Sewer Systems

2007 ◽  
Vol 2 (2) ◽  
Author(s):  
K. Müller
Keyword(s):  
Water Pollution ◽  
Numerical Model ◽  
Critical Condition ◽  
Ground Water Pollution ◽  
Pollution Regulation ◽  
Sewer Systems ◽  
Single Strategy ◽  
Surface Covering ◽  
Critical Class ◽  
Representative Samples

The inspection of sewers can take place whether by means of fixed-intervals in a conventional surface-covering inspection, or by means of need-oriented strategies. Those need-oriented strategies can be differed between a selective inspection, an evaluation of the present sewer condition based on a representative samples and a failure-oriented forecasting strategy. By setting up and implementing a numerical model it is now possible to carry out a comparison between strategies. Herewith, the potential of success from every single strategy concerning different boundary conditions has been evaluated. For larger Sewer Systems a failure-oriented forecasting strategy presents a more reasonable alternative than the conventional surface-covering one. The reason is because the holding time from every sewer in a critical condition can be reduced considerably within this kind of oriented-need inspections compared to the conventional ones. Similarly, this method meets the ability to estimate the whole condition of a sewer for a given term in the minimum time, which usually could not be achieved by a conventional inspection. Oriented-need inspection strategies offer even superior advantages when the crop and the ground water pollution regulation controls have been followed from the beginning, in order to reduce holding times within sewers in a critical class-condition.

The impact of urban effluents on the coastal marine environment of Mediterranean islands

1995 ◽  
Vol 32 (9-10) ◽  
pp. 85-94 ◽  
Author(s):  
Michael O. Angelidis
Keyword(s):  
Heavy Metals ◽  
Organic Matter ◽  
Marine Environment ◽  
Suspended Particle ◽  
Pollution Source ◽  
Mediterranean Islands ◽  
Coastal Marine Environment ◽  
Coastal Marine ◽  
The Impact ◽  
The City

The impact of the urban effluents of Mytilene (Lesvos island, Greece) on the receiving coastal marine environment, was evaluated by studying the quality of the city effluents (BOD5, COD, SS, heavy metals) and the marine sediments (grain size, organic matter, heavy metals). It was found that the urban effluents of Mytilene contain high organic matter and suspended particle load because of septage discharge into the sewerage network. Furthermore, although the city does not host important industrial activity, its effluents contain appreciable metal load, which is mainly associated with the particulate phase. The city effluents are discharged into the coastal marine environment and their colloidal and particulate matter after flocculation settles to the bottom, where is incorporated into the sediments. Over the years, the accumulation of organic matter and metals into the harbour mud has created a non-point pollution source in the relatively non-polluted coastal marine environment of the island. Copper and Zn were the metals which presented the higher enrichment in the sediments of the inner harbour of Mytilene.

Sign in / Sign up

Export Citation Format

Share Document