scholarly journals Selection indexes in the simultaneous increment of yield components in topcross hybrids of green maize

2020 ◽  
Vol 55 ◽  
Author(s):  
Willame dos Santos Candido ◽  
Caique Machado e Silva ◽  
Maraiza Lima Costa ◽  
Bruna Elaine de Almeida Silva ◽  
Beatriz Lima de Miranda ◽  
...  
Keyword(s):  
Yield Components ◽  
Block Design ◽  
Yield Traits ◽  
Genetic Gains ◽  
Economic Weights ◽  
Randomized Complete Block Design ◽  
Selection Indexes ◽  
Best Fit ◽  
Topcross Hybrids ◽  
Selection Of

Abstract: The objective of this work was to define the most suitable selective strategy for the simultaneous increment of yield components of green maize, by comparing three selection indexes weighted by economic weights and by the REML/BLUP method, in the assessment of predicted genetic gains for traits of interest. An experiment with 75 topcross hybrids from partially inbred S1 lines of green maize was carried out in Jataí, in the state of Goiás, Brazil, using a randomized complete block design, with four replicates. The following yield traits were evaluated: straw ears and commercial ears, grain mass, ear length, ear diameter, and number of ear rows. The selection indexes of Smith and Hazel, Williams, and Mulamba & Mock were applied and weighted for four economic weights (1, CVg, CVg/CVe, and h2). Among the tested selection indexes, those of Williams and Mulamba & Mock are the best-fit ones for the selection of topcross hybrids of green maize, as they provide positive and more balanced selection gains for all evaluated traits. The REML/BLUP method shows better predicted genetic gains than those achieved by the three selection indexes, besides being efficient for the selection of topcross hybrids of green maize.

scholarly journals Genotypic selection of advanced potato clones by REML/BLUP

2018 ◽  
Vol 36 (2) ◽  
pp. 265-270
Author(s):  
Giovani O Silva ◽  
Arione S Pereira ◽  
Fernanda Q Azevedo ◽  
Agnaldo DF Carvalho
Keyword(s):  
Yield Components ◽  
Tuber Yield ◽  
Block Design ◽  
Yield Traits ◽  
Tuber Weight ◽  
Randomized Complete Block Design ◽  
Commercial Cultivars ◽  
Average Tuber Weight ◽  
New Cultivars ◽  
Selection Of

ABSTRACT Potato genotypes were evaluated in their performance, according to the genotype values for tuber yield traits. The experiments were carried out in Canoinhas and Pelotas, Brazil, in spring 2014. Eleven advanced clones and two commercial cultivars (Agata and Asterix) (check cultivars) were evaluated. A randomized complete block design with four replicates was used. Plots were harvested 110 days after planting, and evaluated for tuber yield components. The data were submitted to joint deviance analyzes using the REML/BLUP method. Clones F102-22-07 and F32-02-06 stood out positively for tuber yield. F102-22-07 showed high marketable tuber yield and average tuber weight, while clone F32-02-06 exhibited high marketable and total tuber yield. The superiority of these advanced clones in relation to the check cultivars, suggests their potential to be evaluated in other environments, aiming their release as new cultivars.

scholarly journals Prediction of genetic gains with selection between and within S2 progenies of papaya using the REML/Blup analysis

2017 ◽  
Vol 52 (12) ◽  
pp. 1167-1177 ◽  
Author(s):  
Tamiris Pereira da Silva ◽  
Francisco das Chagas Vidal Neto ◽  
Júlio César Do Vale
Keyword(s):  
Genetic Gain ◽  
Carica Papaya ◽  
Genetic Parameters ◽  
Block Design ◽  
Stem Diameter ◽  
Average Mass ◽  
Genetic Gains ◽  
Randomized Complete Block Design ◽  
Selection Of

Abstract: The objective of this work was to predict the genetic gains with selection of superior individuals within papaya (Carica papaya) progenies using the REML/Blup analysis. Thirty-six S2 progenies, originated from the Calimosa and Tainung 1 hybrids, and two commercial control checks were evaluated in a randomized complete block design, with four replicates. The following traits were evaluated: heights of plants and first fruit; stem diameter at 12 and 18 months; number of days required for fruiting; number, mass, and average mass of commercial fruit; and number and mass of carpelloid and pentandric fruit. The magnitudes of the genetic parameters indicated that the variability present in most of the characters allows greater genetic gain if the selection is made at the progeny level, and not in individual plants. For selection among progenies, PROT-268, PROT-74, PROT-55, and PROT-22 were the most promising, with the greatest genetic gain for the studied characters. In the selection among and within progenies, the prediction of the gains is higher for the increase in the expression of the number of commercial fruit and for the decrease in the expression of pentandric fruit.

scholarly journals Genetic gains in physic nut using selection indexes

2012 ◽  
Vol 47 (3) ◽  
pp. 402-408 ◽  
Author(s):  
Leonardo Lopes Bhering ◽  
Bruno Galvêas Laviola ◽  
Caio Césio Salgado ◽  
Carlos Felipe Barrera Sanchez ◽  
Tatiana Barbosa Rosado ◽  
...  
Keyword(s):  
Block Design ◽  
Selection Strategy ◽  
Physic Nut ◽  
Germplasm Bank ◽  
Genetic Gains ◽  
Canopy Volume ◽  
Randomized Complete Block Design ◽  
Length Width ◽  
Second Year ◽  
Selection Indexes

The objective of this work was to estimate genetic gains in physic nut (Jatropha curcas) using selection indexes and to establish the best selection strategy for the species. Direct and indirect selection was carried out using different selection indexes, totalizing 14 strategies. One hundred and seventy five families from the active germplasm bank of Embrapa Agroenergy, Brasília, Brazil, were analyzed in a randomized complete block design with two replicates. The evaluated traits were: grain yield; seeds per fruit; endosperm/seed ratio; seed weight, length, width, and thickness; branches per plant at 0.5, 1.0, and 1.5 m; plant height; stem diameter; canopy projection on rows and between lines; canopy volume; juvenility (days to the first flowering); and height of the first inflorescence. Evaluations were done during the second year of cultivation. The use of selection indexes is relevant to maximize the genetic gains in physic nut, favoring a better distribution of desirable traits. The multiplicative and restrictive indexes are considered the most promising for selection.

scholarly journals Prediction of genetic gains by selection indexes and REML/BLUP methodology in a population of sour passion fruit under recurrent selection

2017 ◽  
Vol 39 (2) ◽  
pp. 183 ◽  
Author(s):  
Fernando Higino de Lima e Silva ◽  
Alexandre Pio Viana ◽  
Jôsie Cloviane De Oliveira Freitas ◽  
Eileen Azevedo Santos ◽  
Daniele Lima Rodrigues ◽  
...  
Keyword(s):  
Recurrent Selection ◽  
Block Design ◽  
Total Yield ◽  
Passion Fruit ◽  
Soluble Solids ◽  
Transverse Diameter ◽  
Genetic Gains ◽  
Breeding Programmes ◽  
Selection Indexes ◽  
Selection Of

Breeding programmes must be improved to accelerate the development of new cultivars due to the commercial importance of passion fruit. This study compared four selection indexes and the REML/BLUP methodology in an assessment of predicted genetic gains in the traits of interest. A total of 81 full-sib progenies derived from the third cycle of recurrent selection were assessed for one harvest in one environment. The experiment was arranged in a randomized complete block design with five plants per plot. The following traits were assessed: number of fruits, total yield, fruit mass, fruit longitudinal diameter, fruit transverse diameter, fruit pulp percentage, shell thickness and content of soluble solids. The Mulamba & Mock index produced the best results for the selection of progenies. The REML/BLUP method was the most efficient and selected progenies with predicted genetic gains better than the selection indexes tested. 

scholarly journals Evaluation of Urea Super Granule as a Source of Nitrogen in Transplant Aman Rice

2014 ◽  
Vol 24 (1-2) ◽  
pp. 29-37 ◽  
Author(s):  
TA Qurashi ◽  
MA Salam ◽  
M Jannat ◽  
MG Rabbani
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Block Design ◽  
Prilled Urea ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Use Efficiency ◽  
Experimental Treatments ◽  
N Management ◽  
1000 Grain Weight

An experiment was carried out at Bangladesh Agricultural University, Mymensingh to evaluate the effect of urea super granule (USG) as a source of nitrogen on the yield and yield components of transplant Aman rice cv. BRRI dhan39, BRRI dhan46 and BINA dhan7. Five levels of N (viz., 0, 60, 120 kg ha-1 as prilled urea and 60 and 120 kg ha-1 as USG) were taken as experimental treatments. The experiment was laid out in a randomized complete block design with three replications. Plant height, effective tillers hill-1, grains panicle-1 and grain yield varied significantly due to different cultivars. All the yield and yield components except 1000-grain weight were influenced significantly by the levels of nitrogen fertilizer. The highest grain yield (4.82 t ha-1) was recorded in BINA dhan7 and the lowest one (4.30 t ha-1) was recorded in BRRI dhan39. Nitrogen @ 120 kg ha-1 as USG performed the best among the treatments in respect of yield and yield components of rice. The highest grain yield (5.46t ha-1) was obtained from BINA dhan7 with 120 kg N ha-1 as USG which was statistically identical with 60 kg N ha-1 as USG. A considerable amount (31.25%) of prilled urea (PU) nitrogen could be saved by using USG. It may be concluded that USG could be used as N management to achieve better nitrogen use efficiency in reducing N loss than the PU.DOI: http://dx.doi.org/10.3329/pa.v24i1-2.19095 Progress. Agric. 24(1&2): 29 - 37, 2013

scholarly journals Genetic parameters and estimated genetic gains in young rubber tree progenies

2013 ◽  
Vol 48 (4) ◽  
pp. 411-416 ◽  
Author(s):  
Cecília Khusala Verardi ◽  
Erivaldo José Scaloppi Junior ◽  
Guilherme Augusto Peres Silva ◽  
Lígia Regina Lima Gouvêa ◽  
Paulo de Souza Gonçalves
Keyword(s):  
Genetic Gain ◽  
Genetic Parameters ◽  
Block Design ◽  
Rubber Tree ◽  
First Year ◽  
Genetic Gains ◽  
Selection Gain ◽  
Randomized Block Design ◽  
Using Data ◽  
Selection Of

The objective of this work was to assess the genetic parameters and to estimate genetic gains in young rubber tree progenies. The experiments were carried out during three years, in a randomized block design, with six replicates and ten plants per plot, in three representative Hevea crop regions of the state of São Paulo, Brazil. Twenty-two progenies were evaluated, from three to five years old, for rubber yield and annual girth growth. Genetic gain was estimated with the multi-effect index (MEI). Selection by progenies means provided greater estimated genetic gain than selection based on individuals, since heritability values of progeny means were greater than the ones of individual heritability, for both evaluated variables, in all the assessment years. The selection of the three best progenies for rubber yield provided a selection gain of 1.28 g per plant. The genetic gains estimated with MEI using data from early assessments (from 3 to 5-year-old) were generally high for annual girth growth and rubber yield. The high genetic gains for annual girth growth in the first year of assessment indicate that progenies can be selected at the beginning of the breeding program. Population effective size was consistent with the three progenies selected, showing that they were not related and that the population genetic variability is ensured. Early selection with the genetic gains estimated by MEI can be made on rubber tree progenies.

scholarly journals COMPARISON OF YIELD AMONG DIFFERENT HIGH YIELDING VARIETIES OF WETLAND RICE

Agric ◽  
2021 ◽  
Vol 33 (1) ◽  
pp. 57-66
Author(s):  
Kiki Kusyaeri Hamdani ◽  
Yati Haryati
Keyword(s):  
Yield Components ◽  
Block Design ◽  
Yield Component ◽  
Yield Potential ◽  
Duncan Multiple Range Test ◽  
Rice Varieties ◽  
Randomized Complete Block Design ◽  
High Yielding Varieties ◽  
Range Test ◽  
Better Than

New superior varieties (VUB) are a reliable technological innovation to increase rice productivity. This study aims to determine the yield potential of some lowland rice VUB. The assessment was carried out on land owned by a member of the Sumber Rejeki Farmer Group, Cintaratu Village, Lakbok District, Ciamis Regency at Dry Season II in June-September 2020. The study used a randomized complete block design (RCBD) with six varieties of treatment and was repeated ten times. The varieties tested were Inpari 32, Inpari 42, Padjadjaran, Cakrabuana, Inpari IR Nutrizinc, and Siliwangi varieties. The variables observed included the growth component, yield component, and yield component. Data were analyzed using the F test followedby the Duncan Multiple Range Test at the Q=5% level. In addition, a correlation test was conducted between the growth components, yield components, and yields. The results of the study indicated that the new superior rice varieties studied had different performance in growth, number of tillers, yield, and yield components. Inpari 42 variety produced the highest productivity, namely 6.88 ton ha-1 which was supported by the number of grains per panicle, percentage of filled grains per panicle, and percentage of empty grain per panicle which were better than other varieties. Plant height and number of grains per panicle were positively correlated with yield.

scholarly journals Evaluation of nitrogen (Urea) on Zea mays L. under Balkh province climate

2020 ◽  
Vol 3 (1) ◽  
pp. 6-9
Author(s):  
Nasratullah Habibi ◽  
Friba Sikandari
Keyword(s):  
Zea Mays ◽  
Nitrogen Fertilizer ◽  
Yield Components ◽  
Zea Mays L ◽  
Agricultural Research ◽  
Block Design ◽  
High Yield ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Effect On Yield

An experiment was conducted to evaluate effect of urea fertilizer on yield and yield components of Zea mays L. Using Randomized Complete Block Design (RCBD) split plots in three replications in agricultural research farm of Balkh University by 2019. Doses of urea used in this experiment were 0, 80, 160 and 240 kg ha-1 , respectively. It has been found that amount of nitrogen fertilizer (urea) had significant effect on yield of maize at p<0.05. The higher level of nitrogen caused the higher grain yield, number of kernels per ear, the number of grains per ear row, ear diameter, cob length, grain per plant and plant height. As a result 7.76 ton ha-1 was recorded as high yield while 240 kg ha-1 urea was used, and 5.12 ton ha-1 was recorded as low yield in treatment one with 0 kg ha-1 of nitrogen fertilizer. Finally, as a result using 240 kg ha-1 nitrogen fertilizer is recommended.

scholarly journals Penampilan Fenotipik Karakter Hasil Galur Harapan Padi Rawa di Lahan Pasang Surut Karang Agung, Sumatera Selatan

2016 ◽  
Vol 17 (1) ◽  
pp. 19
Author(s):  
Rini Hermanasari ◽  
NFN Supartopo ◽  
B. Kustianto
Keyword(s):  
Plant Height ◽  
Yield Components ◽  
Rice Field ◽  
Block Design ◽  
Yield Component ◽  
Yield Potential ◽  
Lower Yield ◽  
Tidal Swamp ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components

<p>Phenotypic Performance of Yield and Yield Component of Rice Promising Lines at Tidal Swamp Area in Karang Agung, South Sumatra. An experiment was conducted in Karang Agung, in April until September 2007. The experiment aimed at evaluating phenotypic performance of yield and yield components of promising lines in tidal swamp rice field. The experiment was arranged in a Randomized Complete Block Design with 16 treatments and four replications. The promising lines tested were B9858-KA-55, B9833C-KA-14, B9852E-KA-66, B5524G-SM-61-2-1, B7003D-MR-24-3-1, KAL9414F-MR-2-KN-0, KAL9418F-MR-2-KN-0, B10214FTB- 7-2-3, IR70213-9-CPA-12-UBN-2-1-3-1, IR70215-2- CPA-2-1-B-1-2. The check varieties used were IR42, Batanghari and Lembu Sawah. The results of this experiment showed that IR61242-3B-B-2 had better performance among varieties and promising lines tested, as well as giving the highest yield potential. Meanwhile, the line B10214F-TB-7-2- 3 had better performance of number of filled grain, and 1.000 grain weight. It also showed higher yield potential compared to IR42 and Batanghari. The line KAL9418F-MR-2-KN-0 had better performance of plant height, 1.000 weight grain and harvest age, but showed lower yield potential compared to those other check varieties.</p><p> </p><p><strong>Abstrak</strong></p><p>Percobaan dilaksanakan di KP Karang Agung, Sumatera Selatan pada bulan April sampai September 2007. Penelitian bertujuan untuk mendapatkan informasi tentang penampilan fenotipik karakter hasil dan komponen hasil dari galur-galur harapan padi rawa di lahan pasang surut Karang Agung. Percobaan ditata dalam rancangan acak kelompok dengan 16 perlakuan dan empat ulangan. Galur-galur yang diuji di antaranya B9858-KA-55, B9833C-KA-14, B9852E-KA-66, B5524GSM- 61-2-1, B7003D-MR-24-3-1, KAL9414F-MR-2-KN-0, KAL9418F-MR-2-KN-0, B10214F-TB-7-2-3, IR70213-9- CPA-12-UBN-2-1-3-1, dan IR70215-2-CPA-2-1-B-1-2. Varietas pembanding digunakan IR42, Batanghari, dan Lembu Sawah. Hasil penelitian menunjukkan bahwa galur IR61242- 3B-B-2 memiliki penampilan lebih baik dari varietas pembanding untuk karakter tinggi tanaman, jumlah gabah isi, bobot 1.000 butir gabah, dan potensi hasil. Galur B10214F-TB-7-2-3 memberikan penampilan lebih baik untuk karakter jumlah gabah isi, bobot 1.000 butir, dan potensi hasil lebih tinggi daripada pembanding IR42 dan Batanghari. Galur KAL9418F-MR- 2-KN-0 memiliki penampilan lebih baik untuk karakter bobot 1.000 butir, tinggi tanaman, dan umur panen, tetapi potensi hasilnya lebih rendah dari ketiga varietas pembanding.</p>

scholarly journals Evaluation of Yield, Reaction to Diseases, and Grain Physical Attributes of Some Introduced Rice Hybrids in Ghana

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Samuel Oppong Abebrese ◽  
Alex Yeboah ◽  
Wilson Dogbe ◽  
Paul Kofi Ayirebi Dartey ◽  
Richard Akromah ◽  
...  
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Hybrid Rice ◽  
Block Design ◽  
Leaf Blight ◽  
Rice Production ◽  
Bacterial Leaf Blight ◽  
Yield Potential ◽  
Randomized Complete Block Design ◽  
Physical Attributes

Hybrid rice technology is one of the promising, sustainable, and proven technologies for increasing rice production and productivity with a yield advantage of 15–30% over modern inbred varieties. The potential of hybrid rice has so far not been exploited in Ghana. This study was undertaken to evaluate the yield potential, reaction to diseases, and physical grain attributes of some introduced hybrids. The trials were laid out in a randomized complete block design (RCBD) with three replicates across three locations. Data were taken on grain yield, yield components, reaction to diseases, and grain physical characteristics. Four promising hybrids (SWARNA 2, ARGH 1501, ARGH 1502, and ARGH 1503) with a mean yield advantage of 15–20.8% over the best inbred check “AgraRice” were identified. With few exceptions, the hybrids were broadly adapted and had adequate resistance to blast and bacterial leaf blight. Most of the test hybrids had long slender grains which make them acceptable to the Ghanaian market but lacked aroma.

Sign in / Sign up

Export Citation Format

Share Document