scholarly journals Performance of soybean grown in succession to black oat and wheat

2020 ◽  
Vol 55 ◽  
Author(s):  
Alvadi Antonio Balbinot Junior ◽  
Julio Cezar Franchini dos Santos ◽  
Henrique Debiasi ◽  
Antônio Eduardo Coelho ◽  
Moryb Jorge Lima da Costa Sapucay ◽  
...  
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Dry Matter ◽  
Plant Density ◽  
Block Design ◽  
Agronomic Performance ◽  
Plant Analysis ◽  
Area Index ◽  
Randomized Complete Block Design ◽  
The Impact

Abstract: The objective of this work was to evaluate the influence of isolated or combined roots and straw of black oat and wheat, as previous crops in autumn/winter, on the performance of soybean in succession. The experiment was carried out in the 2017/2018 and 2018/2019 crop seasons in a randomized complete block design, with four replicates. The following seven treatments were applied in the autumn/winter of 2017 and 2018, before soybean planting: fallow; straw of black oat or wheat, distributed on plots kept under fallow during autumn/winter, without roots; plots only with roots of black oat or wheat, without straw; and plots with straw and roots of black oat or wheat. Soybean crop performance was estimated using the following variables: plant density, leaf area index, soil plant analysis development (SPAD) index, shoot dry matter, grain yield, and yield components. In comparison with fallow, the cultivation of black oat or wheat, as previous crops during the autumn/winter, increases soybean grain yield. The impact of the roots of black oat or wheat on soybean yield is similar to that of straw. Soybean agronomic performance is improved in the combined presence of roots and straw of black oat or wheat.

scholarly journals Effect of variety and sulphur on yield and yield components of groundnut

2019 ◽  
Vol 17 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Nurezannat . ◽  
Md Abdur Rahman Sarkar ◽  
Md Romij Uddin ◽  
Uttam Kumer Sarker ◽  
Md Salahuddin Kaysar ◽  
...  
Keyword(s):  
Yield Components ◽  
Harvest Index ◽  
Dry Matter ◽  
Block Design ◽  
Growth And Yield ◽  
Area Index ◽  
Pod Yield ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Stover Yield

Variety and sulphur play a significant role in the physiological growth and yield of crops such as groundnut. Even so, there has been little information on the application of variety and sulphur in groundnut. Therefore, an experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University (BAU), Mymensingh to investigate the effect of sulphur on yield and yield components of two groundnut varieties. The experiment comprised two varieties of groundnut viz. BARI Cheenabadam-8 and Bina cheenabadam-6; and five levels of sulphur viz. 0, 15, 30, 45, and 60 kg ha–1. The experiment was laid out in a randomized complete block design with three replications. Among the parameters leaf area index  (2.03), dry matter plant–1 (50.36 g),  number of primary branches plant–1 (10.33 cm), number of secondary branches plant–1 (9.27 cm), number of pegs plant–1 (46.27), number of total pods plant–1 (37.80), 100-pods weight (96.82 g), 100- seeds weight (46.25 g), shelling percentage (85.29%), pod yield (3.13 t ha–1), seed yield  (2.67 t ha–1), stover yield (6.84 t ha–1), and harvest index (31.37 %) were the highest  in BARI Cheenabadam-8, when treated with sulphur 60 kg ha–1. The lowest values of all these parameters were found in Binacheenabadam-6, when no sulphur was applied. This study suggested that BARI Cheenabadam-8 combined with sulphur 60 kg ha–1 could be applied for obtaining the highest yield of groundnut. J. Bangladesh Agril. Univ. 17(1): 1–8, March 2019

scholarly journals Effect of variety and phosphorus on the yield components and yield of groundnut

2018 ◽  
Vol 29 (2) ◽  
pp. 117-126
Author(s):  
SJ Mouri ◽  
MAR Sarkar ◽  
MR Uddin ◽  
UK Sarker ◽  
MS Kaysar ◽  
...  
Keyword(s):  
Yield Components ◽  
Harvest Index ◽  
Dry Matter ◽  
Block Design ◽  
Area Index ◽  
Pod Yield ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Stover Yield ◽  
Four Levels

An experiment was carried out at the agronomy field laboratory of Bangladesh Agricultural University, Mymensingh to evaluate the effect of variety and phosphorus on the yield and yield components of groundnut. The experiment comprising of two groundnut varieties viz. BARI Cheenabadam-8 and BINA Cheenabadam-6 and four levels of phosphorus viz. 0, 20, 40 and 60 kg P ha-1. The experiment was laid out in a randomized complete block design with three replications. The highest value of all the parameters e.g. leaf area index (2.02), dry matter (51.88 g plant-1), number of  primary branches plant-1 (10.70), number of  secondary branches plant-1 (13.85), number of pegs plant-1 (64.35), number of total pods plant-1 (44.50), weight of 100-pods (94.66 g), weight of 100-seeds (44.47 g), shelling percentage (81.84%), seed yield (2.48 t ha-1), pod yield (3.03 t ha-1), stover yield (6.92 t ha-1) and harvest index (30.45%) were recorded from  BARI Cheenabadam-8 applied with 60 kg P ha-1. The lowest value of all these parameters was found in BINA Cheenabadam-6 and with no applied phosphorus.  It can be concluded that BARI Cheenabadam-8 should preferably be fertilized with 60 kg P ha-1 to obtain the highest yield.Progressive Agriculture 29 (2): 117-126, 2018

scholarly journals Nitrogen topdressing and application ways of fluazifop-p-butyl + fomesafen in weed control and agronomic performance of common bean

2015 ◽  
Vol 87 (4) ◽  
pp. 2301-2307 ◽  
Author(s):  
MATHEUS G. SILVA ◽  
ORIVALDO ARF ◽  
PAULO E. TEODORO
Keyword(s):  
Common Bean ◽  
Weed Control ◽  
Yield Components ◽  
Dry Matter ◽  
Block Design ◽  
Agronomic Performance ◽  
Randomized Block Design ◽  
Bean Yield ◽  
Leaf N Content ◽  
Leaf N

ABSTRACT The objective of this study was to investigate the effect of interaction between nitrogen topdressing and different application ways (active ingredients) a.i. fluazifop-p-butyl + fomesafen in weed control and agronomic performance of common bean. The experiment was conducted during winter 2003 in Selvíria/MS. The experimental design used was a randomized block design with four replications in a factorial scheme 2x7. The first factor was composed by the absence or presence of nitrogen topdressing, while the second factor consisted of different application ways of fluazifop-p-butyl + fomesafen. The following variables were measured: leaf N content, dry matter of plants, yield components (number of pods plant-1, number of grains plant-1, the average number of grains pod-1 and mass of 100 grains), grain yield, phytotoxicity and weed control percentage. The nitrogen topdressing with 75 kg ha-1provided higher dry matter of plants, higher weed control and higher common bean yield of irrigated winter. In the absence of nitrogen topdressing in the application of urea before or together to fluazifop-p-butyl + fomesafen increased their effectiveness in controlling weeds without interference in the agronomic performance of common bean.

scholarly journals Hill drop sowing of soybean with different number of plants per hole

2018 ◽  
Vol 48 (5) ◽  
Author(s):  
Esmael Lopes dos Santos ◽  
Victor José Agassi ◽  
Alessandro Sartor Chicowski ◽  
Julio Cezar Franchini ◽  
Henrique Debiasi ◽  
...  
Keyword(s):  
Plant Density ◽  
Block Design ◽  
Agronomic Performance ◽  
Soybean Cultivars ◽  
Lack Of Information ◽  
Cropping Season ◽  
Randomized Complete Block Design ◽  
Cropping Seasons

ABSTRACT: In the last few cropping seasons, some soybean producers have tested the application of a hill drop sowing method, usually from three to four seeds every 30 to 40cm. However, there is a lack of information in the literature about the effect of this practice on soybean performance. Thus, the objective of this study was to evaluate the effect of a hill drop sowing with different number of plants per hole on soybean performance. The study was conducted in Londrina - PR, Brazil, during the 2013/14, 2014/15 and 2016/17 cropping seasons. The experiment was a randomized complete block design with four replications and a 2x5 factorial scheme. The first factor consisted of two soybean cultivars, BRS 359RR and NK 7059RR analyzed in the first two cropping seasons and BRS 359RR and BRS 1010IPRO in the last cropping season. The second factor was constituted by five in-hill hole-spacing treatments (HS) (8, 16, 24, 32 and 40cm), with rows spaced 50cm apart. To maintain the same plant density in all treatments (270,000 plants ha-1), sowing was performed manually, being then thinned out. After thinning, the distribution was one plant per hole at HS8, 2 plants at HS16, 3 plants at HS24, 4 plants at HS32, and 5 plants at HS40. The agronomic performance of soybean in hill drop sowing with different number of plants per hole is similar to that of an equidistant distribution of plants.

scholarly journals Residual effects of superficial liming on tropical soil under no-tillage system

2016 ◽  
Vol 51 (9) ◽  
pp. 1633-1642 ◽  
Author(s):  
Claudio Hideo Martins da Costa ◽  
Carlos Alexandre Costa Crusciol ◽  
Jayme Ferrari Neto ◽  
Gustavo Spadotti Amaral Castro
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Block Design ◽  
Residual Effects ◽  
Available Phosphorus ◽  
Long Term Effects ◽  
Matter Production ◽  
Randomized Complete Block Design ◽  
Tillage System

Abstract The objective of this work was to evaluate the long-term effects of the surface application of lime on soil fertility and on the mineral nutrition and grain yield of soybean, and of black oat and sorghum in crop succession. The experiment was carried out on a clayey Oxisol, in a randomized complete block design, with four replicates. Treatments consisted of lime the rates of 0, 1,000, 2,000, and 4,000 kg ha-1, applied in October 2002 and November 2004. Soil samples were collected at five soil layers, down to 0.60-m depth. Surface liming was effective in reducing soil acidity and increasing Ca2+ and Mg2+ contents in the subsurface. Moreover, it increased available phosphorus contents and soil organic matter in the long term (48 to 60 months after the last lime application). Surface liming improved plant nutrition, mainly for N, Ca, and Mg, and increased dry matter production and grain yield of the crops, even in years with regular distribution of rainfall. The greatest productivities of soybean, black oat, and sorghum were obtained with the respective estimated lime doses of 4,000, 2,333, and 3,281 kg ha-1, for shoot dry matter, and of 2,550, 3,555, and over 4,000 kg ha-1, for grain yield.

scholarly journals Evaluation of Urea Super Granule as a Source of Nitrogen in Transplant Aman Rice

2014 ◽  
Vol 24 (1-2) ◽  
pp. 29-37 ◽  
Author(s):  
TA Qurashi ◽  
MA Salam ◽  
M Jannat ◽  
MG Rabbani
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Block Design ◽  
Prilled Urea ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Use Efficiency ◽  
Experimental Treatments ◽  
N Management ◽  
1000 Grain Weight

An experiment was carried out at Bangladesh Agricultural University, Mymensingh to evaluate the effect of urea super granule (USG) as a source of nitrogen on the yield and yield components of transplant Aman rice cv. BRRI dhan39, BRRI dhan46 and BINA dhan7. Five levels of N (viz., 0, 60, 120 kg ha-1 as prilled urea and 60 and 120 kg ha-1 as USG) were taken as experimental treatments. The experiment was laid out in a randomized complete block design with three replications. Plant height, effective tillers hill-1, grains panicle-1 and grain yield varied significantly due to different cultivars. All the yield and yield components except 1000-grain weight were influenced significantly by the levels of nitrogen fertilizer. The highest grain yield (4.82 t ha-1) was recorded in BINA dhan7 and the lowest one (4.30 t ha-1) was recorded in BRRI dhan39. Nitrogen @ 120 kg ha-1 as USG performed the best among the treatments in respect of yield and yield components of rice. The highest grain yield (5.46t ha-1) was obtained from BINA dhan7 with 120 kg N ha-1 as USG which was statistically identical with 60 kg N ha-1 as USG. A considerable amount (31.25%) of prilled urea (PU) nitrogen could be saved by using USG. It may be concluded that USG could be used as N management to achieve better nitrogen use efficiency in reducing N loss than the PU.DOI: http://dx.doi.org/10.3329/pa.v24i1-2.19095 Progress. Agric. 24(1&2): 29 - 37, 2013

scholarly journals Effect of Zinc and Boron on Growth and Yield of Okra (Abelmoschus esculentus L.)

2020 ◽  
pp. 41-47
Author(s):  
Nusrat Jahan ◽  
Md. Ashabul Hoque ◽  
Md. Rasal-Monir ◽  
Sumya Fatima ◽  
Mohammad Nurul Islam ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Area Index ◽  
Spad Value ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Fruit Diameter

The study was carried out to find out the effect of zinc (Zn) and boron (B) on growth and yield of okra (BARI Dherosh 1). The experiment was laid out in Randomized Complete Block Design (RCBD) with three replications. The treatments of the experiment were, T0 (without Zn or B), T1 (20 kg Zn ha-1), T2 (30 kg Zn ha-1), T3 (10 kg B ha-1), T4 (20 kg B ha-1), T5 (20 kg Zn ha-1 + 10 kg B ha-1), T6 (20 kg Zn ha-1 + 20 kg B ha-1), T7 (30 kg Zn ha-1 + 10 kg B ha-1) and T8 (30 kg Zn ha-1 + 20 kg B ha-1) were undertaken to evaluate the best results of the study. The highest plant height was found in T8 (30 kg Zn ha-1 + 20 kg B ha-1) but the highest number of leaves plant-1 was recorded from T7 (30 kg Zn ha-1 + 10 kg B ha-1). On the other hand, the maximum leaf area index, SPAD value, mean fruit weight, fruit length, fruit diameter, fruit dry matter (%), number of fruits plant-1, fresh fruit weight plant-1 , fruit yield plot-1 and fruit yield ha-1 were found in T7 (30 kg Zn ha-1 + 10 kg B ha-1), while the control (T0) showed lowest performance for the respected parameters. It is strongly concluded that 30 kg Zn ha-1 with 10 kg B ha-1 combination may be helpful for okra cultivation in the field level to increase okra production.

scholarly journals Selección temprana de líneas S1 de maíz ricas en lisina: I probadores.

2016 ◽  
Vol 9 (2) ◽  
pp. 65
Author(s):  
María Cristina Vega ◽  
Enrique Navarro ◽  
José Espinoza ◽  
Gustavo A. Buciaga ◽  
José Luis Guerrero
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Agronomic Performance ◽  
Lysine Content ◽  
Fusarium Spp ◽  
Maize Breeding ◽  
High Lysine ◽  
Genetic Base ◽  
Randomized Complete Block Design ◽  
Normal Performance

This research involved ninety-six S1 maize lines with the opaque-2 gene that carne from populations 63 (26 lines), 65 (12 lines), and 68 (58 lines) from the CIMMYT maize breeding programo The S1 lines selected in the laboratory because of their high lysine content were crossed with five testers that had a different genetic base: a synthetic variety, two early lines derived from this variety, and two single intermediate crosses of normal performance. The test crosses were evaluated and compared with five control s (two commercial and three experimental hybrids) using a randomized complete block design in two sites in Mexico during 1992. The objecti ves of this research were to select SI lines in early generations according to their agronomic performance, grain lysine content, and GCA grain yield, and to compare testers' efficiency in discriminating S1 lines. On average, the SI lines of population 63 showed a greater grain yield as compared to that of populations 65 and 68 combined with all testers, except in the case of the synthetic tester YS- 201-M. A line from population 65 combined with tester B3 x B5 showed the highest grain yield (10,23 t ha-I), representing a superiority of 4% above the best commercial hybrid, AN- 447. A total ofthirty-one Sllines were selected based on their agronomic attributes and grain yield: 13, 14, and 4 from populations 63, 65 and 68 respectively]. Tester B3 x B5 tumed out to be the best line discriminator according to the following criteria: grain yield, percentage of ears damaged by Fusarium spp., and number of rotten ears.

scholarly journals Evaluation of Yield, Reaction to Diseases, and Grain Physical Attributes of Some Introduced Rice Hybrids in Ghana

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Samuel Oppong Abebrese ◽  
Alex Yeboah ◽  
Wilson Dogbe ◽  
Paul Kofi Ayirebi Dartey ◽  
Richard Akromah ◽  
...  
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Hybrid Rice ◽  
Block Design ◽  
Leaf Blight ◽  
Rice Production ◽  
Bacterial Leaf Blight ◽  
Yield Potential ◽  
Randomized Complete Block Design ◽  
Physical Attributes

Hybrid rice technology is one of the promising, sustainable, and proven technologies for increasing rice production and productivity with a yield advantage of 15–30% over modern inbred varieties. The potential of hybrid rice has so far not been exploited in Ghana. This study was undertaken to evaluate the yield potential, reaction to diseases, and physical grain attributes of some introduced hybrids. The trials were laid out in a randomized complete block design (RCBD) with three replicates across three locations. Data were taken on grain yield, yield components, reaction to diseases, and grain physical characteristics. Four promising hybrids (SWARNA 2, ARGH 1501, ARGH 1502, and ARGH 1503) with a mean yield advantage of 15–20.8% over the best inbred check “AgraRice” were identified. With few exceptions, the hybrids were broadly adapted and had adequate resistance to blast and bacterial leaf blight. Most of the test hybrids had long slender grains which make them acceptable to the Ghanaian market but lacked aroma.

scholarly journals Response of Wheat Plants to Combinations of Herbicides with Insecticides and Fungicides

2019 ◽  
Vol 37 ◽  
Author(s):  
M. VIECELLI ◽  
F.B. PAGNONCELLI JR. ◽  
M.M. TREZZI ◽  
B.M. CAVALHEIRO ◽  
R.C.R. GOBETTI
Keyword(s):  
Experimental Design ◽  
Grain Yield ◽  
Yield Components ◽  
Dry Matter ◽  
Block Design ◽  
Wheat Grains ◽  
Synergistic Interactions ◽  
Randomized Block Design ◽  
Relative Tolerance ◽  
Chemical Groups

ABSTRACT: The combination of herbicides and other pesticides can influence weed and crop management. This study aimed to evaluate the response of the combination of different herbicides with insecticides or fungicides of different chemical groups on the development and yield of wheat grains of the cultivar ORS Vintecinco. The experimental design was a randomized block design with three replications. The experiment consisted of 33 treatments, as follows: control without application and application of the herbicides 2,4-D (1,005 g a.e. ha-1), bentazon (756 g a.i. ha-1), metsulfuron-methyl (3 g a.i. ha-1), and pyroxsulam (16 g a.i. ha-1), isolated or combined with the insecticides chlorfluazuron (15 g a.i. ha-1), chlorpyrifos (720 g a.i. ha-1), deltamethrin (5 g a.i. ha-1), and methomyl (5 g a.i. ha-1) or with the fungicides azoxystrobin (100 g a.i. ha-1), carbendazim (250 g a.i. ha-1), and propiconazole (190 g a.i. ha-1). Relative tolerance (RT), shoot dry matter (SDM), yield components, and grain yield were evaluated. In general, pyroxsulam had the highest number of synergistic interactions with insecticides and fungicides, reducing RT and SDM, especially the combination pyroxsulam + chlorpyrifos due to a lower RT level (45%) and higher SDM reduction (52%). All combinations of herbicides with the insecticide chlorpyrifos and most of the combinations with the fungicide propiconazole led to a reduction of grain yield when compared to their isolated application or to control without application.

Sign in / Sign up

Export Citation Format

Share Document