Crop Seeding Rate Influences the Performance of Variable Herbicide Rates in a Canola–Barley–Canola Rotation

2004 ◽  
Vol 18 (3) ◽  
pp. 733-741 ◽  
Author(s):  
John T. O'Donovan ◽  
Jeff C. Newman ◽  
K. Neil Harker ◽  
George W. Clayton
Keyword(s):  
Seed Production ◽  
Weed Management ◽  
Crop Yields ◽  
Management Practice ◽  
Soil Seed Bank ◽  
Integrated Weed Management ◽  
Weed Seed ◽  
Seeding Rate ◽  
Wild Mustard ◽  
Yield Responses

Glyphosate-resistant canola was seeded at Vegreville, Alberta, in 1997 and 1999 and barley in rotation with the canola in 1998 at three seeding rates. The effects, at each crop seeding rate, of variable glyphosate (canola) and tralkoxydim plus bromoxynil plus MCPA (barley) rates on crop yield, net economic return and seed production by wild oat, wild mustard, and wild buckwheat, and the amount of weed seed in the soil seed bank was determined. Crop seeding rate influenced the response of canola and barley yield and weed seed production to herbicide rate. At the lowest crop seeding rates, yield responses tended to be parabolic with yields increasing up to one-half and three-quarters of the recommended herbicide rates and trends toward reduced yields at the full rates. This response was not evident at the higher crop seeding rates, where, in most cases the yield reached a maximum between one-half and the full recommended rate. The effects of the herbicides on weed seed production, especially at the lowest rate, were often superior at the higher crop seeding rates. The results indicate that seeding canola and barley at relatively high rates may reduce risk associated with lower crop yields and increased weed seed production at lower than recommended herbicide rates. However, the current cost of herbicide-resistant canola seed may preclude the adoption of this integrated weed management practice by growers.

scholarly journals A “Stressed” Alfalfa-Based Cropping System Leads to the Selection of Quizalofop-Resistant Italian Ryegrass (Lolium perennessp.multiflorum)

Weed Science ◽  
2016 ◽  
Vol 64 (4) ◽  
pp. 683-694 ◽  
Author(s):  
Alberto Collavo ◽  
Silvia Panozzo ◽  
Antonio Allegri ◽  
Maurizio Sattin
Keyword(s):  
Ethyl Ester ◽  
Seed Production ◽  
Weed Management ◽  
Cropping System ◽  
Italian Ryegrass ◽  
Integrated Weed Management ◽  
Forage Production ◽  
Weed Seed ◽  
Quizalofop Ethyl ◽  
Selection Of

Italian ryegrass populations investigated in this study were harvested in an alfalfa-based cropping system. In that system, the agronomic practices and chemical weed management, based on the use of aryloxyphenoxy-propionates herbicides (i.e., quizalofop ethyl ester), were optimized to obtain a dual seed–forage production. Five of seven populations tested were confirmed resistant to quizalofop ethyl ester with resistance indexes ranging from 4.5 to >209. Both target- and nontarget-site resistance mechanisms were most likely involved. Three allelic variants were detected (Ile-1781–Leu, Trp-2027–Cys, and Ile-2041–Asn) in four resistant populations, whereas no known mutations were found in one resistant population. The herbicide treatment on Italian ryegrass plants at different phenological stages suggested that to control regrowth, it is necessary to use two to fives times the herbicide dose suitable for younger plants. This situation is encountered in fields when Italian ryegrass plants need to be controlled to maximize the alfalfa seed production, and it is comparable to using a sublethal herbicide dose, leading to the selection of herbicide-resistant biotypes. In such a situation, the cropping system is not sustainable, and integrated weed management should be implemented to deplete the soil weed seed bank and prevent new weed seed production.

Effect of Seeding Rate on Dose Response of Wild Mustard (Sinapis arvensis) to Fluthiacet-Methyl

Weed Science ◽  
2017 ◽  
Vol 65 (4) ◽  
pp. 525-533 ◽  
Author(s):  
Collen Redlick ◽  
Hema S. N. Duddu ◽  
Lena D. Syrovy ◽  
Christian J. Willenborg ◽  
Eric N. Johnson ◽  
...  
Keyword(s):  
Weed Control ◽  
Dose Response ◽  
Weed Management ◽  
Management Practices ◽  
Indian Mustard ◽  
Integrated Weed Management ◽  
Seeding Rate ◽  
Weed Biomass ◽  
Wild Mustard ◽  
Seed Yields

Concern over the development of herbicide-resistant weeds has led to interest in integrated weed management systems that reduce selection pressure by utilizing mechanical and cultural weed control practices in addition to herbicides. Increasing crop seeding rate increases crop competitive ability and thus can enhance herbicide efficacy. However, it is unknown how increasing the seeding rate affects an herbicide’s efficacy. The objective of this study was to examine the interaction between increasing seeding rate and herbicide dose to control weeds. To meet this objective, the herbicide fluthiacet-methyl was applied to field-grown lentil, with Indian mustard, a proxy for wild mustard, used as a model weed. The experiment was a factorial design with four lentil seeding rates and seven herbicide rates. Overall the herbicide dose response was altered by changing lentil seeding rate. Increasing lentil seeding rate decreased the weed biomass production when herbicides were not applied. In two of the four site-years, increasing lentil seeding rate lowered the herbicide ED50, the dose required to result in a 50% reduction in weed biomass. Increasing the crop seeding rate altered the dose response to provide greater weed control at lower herbicide rates compared with normal crop seeding rates. Increased seeding rates also resulted in higher and more stable crop seed yields across a wider range of herbicide dosages. These results suggest that dose–response models can be used to evaluate the efficacy of other weed management practices that can interact with herbicide performance.

Benefits and Risks of Economic vs. Efficacious Approaches to Weed Management in Corn and Soybean

2004 ◽  
Vol 18 (3) ◽  
pp. 723-732 ◽  
Author(s):  
Allan S. Hamill ◽  
Susan E. Weaver ◽  
Peter H. Sikkema ◽  
Clarence J. Swanton ◽  
Francois J. Tardif ◽  
...  
Keyword(s):  
Weed Control ◽  
Seed Production ◽  
Weed Management ◽  
Crop Yields ◽  
Profit Maximization ◽  
Control Treatment ◽  
High Efficacy ◽  
Weed Seed ◽  
Weed Density ◽  
Yield Maximization

A 3-yr study was conducted on nine farms across southern Ontario to evaluate the risks and benefits of different approaches to weed management in corn and soybean. Weed control decisions were based on field scouting and recommendations from the Ontario version of HADSS™, the herbicide application decision support system. Treatments were selected to maximize profit (economic threshold approach) or to maximize yield (highest treatment efficacy). Reduced rates of the high efficacy treatment for each field also were included. Weed density before and after treatment, crop yields, weed seed return, and the effect of weed control decisions on weed density 1 yr after treatment were assessed. Crop yield varied among years and farms but was not affected by weed control treatment. Weed control at 28 d after treatment (DAT) was often lower and weed density, biomass, and seed production 70 DAT were often higher with the profit maximization approach compared with the yield maximization approach. However, weed density 1 yr later, after each cooperator had applied a general weed control program, did not vary significantly among the previous year's weed control treatments. Reduced rates of the high efficacy treatments did not lead to increased weed problems the next year, despite lower weed control and increased weed seed production in some years. During the 3 yr of the study, weed control costs with the profit maximization approach were approximately Can$45/ha less than with the yield maximization approach.

scholarly journals Genetic improvement and agronomy for enhanced wheat competitiveness with weeds

2001 ◽  
Vol 52 (5) ◽  
pp. 527 ◽  
Author(s):  
D. Lemerle ◽  
G. S. Gill ◽  
C. E. Murphy ◽  
S. R. Walker ◽  
R. D. Cousens ◽  
...  
Keyword(s):  
Weed Management ◽  
Competitive Ability ◽  
Yield Loss ◽  
Plant Traits ◽  
Rapid Development ◽  
Integrated Weed Management ◽  
Weed Competition ◽  
Weed Seed ◽  
Seeding Rate ◽  
Benefits And Costs

The rapid development of herbicide resistance in weeds, and environmental imperatives, have forced the consideration of non-chemical tactics such as crop competition for weed management. This review of wheat–weed competition examines the plant traits associated with wheat competitiveness, and the opportunities for plant breeding or manipulating crop agronomy to differentially favour the growth of the crop. Many studies have proven that enhancing crop competitive ability can reduce weed seed production and crop yield loss, although a number of difficulties in conducting this research are identified and suggestions are made for improvement. It remains to be seen whether crop competitiveness will be considered as a priority by farmers and plant breeders. Farmers require precise information on the reliability of agronomic factors such as increased crop seeding rate or choice of variety for enhancing crop competitive ability in different environments. Plant breeders need to know which plant traits to incorporate in varieties to increase competitive ability. A thorough analysis of the benefits and costs of enhancing wheat competitiveness is needed. Competitive wheat crops should be available as part of reliable and economical integrated weed management packages for farmers.

Validation of a Management Program Based on A Weed Cover Threshold Model: Effects on Herbicide Use and Weed Populations

Weed Science ◽  
2009 ◽  
Vol 57 (2) ◽  
pp. 187-193 ◽  
Author(s):  
Marie-Josée Simard ◽  
Bernard Panneton ◽  
Louis Longchamps ◽  
Claudel Lemieux ◽  
Anne Légère ◽  
...  
Keyword(s):  
Seed Production ◽  
Crop Yield ◽  
Weed Management ◽  
Crop Yields ◽  
Threshold Model ◽  
Management Program ◽  
Weed Seed ◽  
Weed Density ◽  
Weed Cover ◽  
Herbicide Use

Weed management decisions based on weed threshold models offer the opportunity to reduce herbicide use by allowing the possibility of forgoing treatment or lowering rates. Weed thresholds based on a relative leaf-cover model were tested during a 4-yr period at two locations. Two 1.62-ha fields, planted to conventional and glyphosate-resistant corn (2004, 2005, 2007) or soybean (2006), were divided in 900 m2sections. Herbicides were applied postemergence to each of these sections with either variable rates based on weed thresholds, or constant full rates. Variable herbicide rates included: no application, half rate, or full rate. Relative weed cover values of 0.2 and 0.4 (corn) or 0.1 and 0.3 (soybean) served as thresholds for incremental rates. Digital images were used to evaluate the relative weed cover. Weed density was assessed before and after herbicide application. Weed seed production was estimated for two species in 2004 and 2005. No difference in crop yield, relative weed cover, weed density, or weed seed production was observed between conventional and glyphosate-resistant cropping systems. During the first year, herbicide use reduction was obtained (−85.4%) with marginal crop yield loss (5 to 15%). In the subsequent 3 yr, preherbicide weed densities increased and concomitant increases in relative weed cover values did not allow more than a 10% overall reduction in herbicide use. This threshold model designed to maintain crop yields within a given year did not allow significant reduction in herbicide use during the following 3 yr. Residual weed populations most likely replenished the seed bank to levels that allowed weed densities to increase afterward. Increased weed density over time in plots treated with full rates of herbicide every year also indicated that a single postemergence herbicide treatment was not sufficient to contain weed populations at low levels every year in this corn–soybean rotation.

scholarly journals Relation between Soil Weed Seedbank and Weed Management Practises and Diversity in Farms in Kisii Central Sub County, Nyanza

2020 ◽  
Vol 10 ◽  
pp. 1-14
Author(s):  
Charles N. Nyamwamu ◽  
Rebecca Karanja ◽  
Peter Mwangi
Keyword(s):  
Seed Bank ◽  
Weed Management ◽  
Management Practices ◽  
Soil Seed Bank ◽  
Shannon Index ◽  
Weed Seed ◽  
Weed Species ◽  
Western Kenya ◽  
Weed Diversity ◽  
Hand Weeding

This study sought to determine the relation between soil weed seed bank and weed management practices and diversity in farms in Kisii Central Sub County, Western Kenya. Eight administrative sub-locations were randomly selected. Ten farms were selected at equal distance along transect laid across each sub-location. Weed soil seed bank was assessed from soil samples collected from each of the farms; a sub-sample was taken from a composite sample of ten soil cores of 5cm diameter and 15cm deep and placed in germination trays in a greenhouse. Weed diversity in soil weed seedbank was calculated using the Shannon index (H’). Twelve weed species from 12 genera of nine families were recorded. Diversity of the weed species in soil weed seed bank was (H'=1.48). Weed management practises significantly affected weed species soil weed seedbank reserves. Use of inefficient and ineffective hand-weeding techniques resulted in high weed species diversity and abundance.

An Integrated Weed Management Approach to Managing Foxtail Barley (Hordeum jubatum) in Conservation Tillage Systems

1999 ◽  
Vol 13 (2) ◽  
pp. 347-353 ◽  
Author(s):  
Robert E. Blackshaw ◽  
Greg Semach ◽  
Xiangju Li ◽  
John T. O'Donovan ◽  
K. Neil Harker
Keyword(s):  
Crop Yield ◽  
Weed Management ◽  
Conservation Tillage ◽  
Wheat Yield ◽  
Integrated Weed Management ◽  
Management Approach ◽  
Row Spacing ◽  
Seeding Rate ◽  
Tillage Systems ◽  
Perennial Plants

A 4-yr field experiment was conducted to determine the merits of combining cultural and chemical controls to manage foxtail barley in reduced-tillage systems. Factors studied were crop row spacing, seeding rate, and application rate and timing of glyphosate within a spring wheat-flax cropping sequence. Glyphosate applied preseeding at 400 or 800 g/ha killed foxtail barley seedlings but only suppressed established perennial plants. Glyphosate applied postharvest at 800 g/ha killed 60 to 70% of established plants. Combinations of preseeding and postharvest glyphosate gave the greatest reductions in foxtail barley biomass and seed production and resulted in the greatest increases in crop yield. Including flax in the rotation allowed use of grass herbicides such as quizalofop or sethoxydim that effectively controlled foxtail barley seedlings and provided some suppression of perennial plants. An increase in wheat seeding rate from 75 to 115 kg/ha reduced foxtail barley growth and increased wheat yield in 3 of 4 yr. Increasing the flax seeding rate from 40 to 80 kg/ha or reducing wheat and flax row spacing from 30 to 20 cm provided little benefit in managing foxtail barley or increasing crop yield. A multiyear approach combining agronomic practices and timely use of herbicides should allow growers to effectively manage foxtail barley in annual cropping systems using conservation tillage.

Management of Avena ludoviciana and Phalaris paradoxa with barley and less herbicide in subtropical Australia

2001 ◽  
Vol 41 (8) ◽  
pp. 1179 ◽  
Author(s):  
S. R. Walker ◽  
G. R. Robinson ◽  
R. W. Medd
Keyword(s):  
Seed Production ◽  
Weed Management ◽  
Field Experiments ◽  
Management Strategies ◽  
Maximum Yield ◽  
Yield Reduction ◽  
Weed Seed ◽  
Tiller Density ◽  
Weed Emergence ◽  
Subtropical Australia

The competitive advantage of barley compared with wheat was quantified for suppressing seed production of Avena ludoviciana Durieu. (wild oats) andPhalaris paradoxa L. (paradoxa grass), and for improving herbicide effectiveness on these major winter grass weeds of the subtropical grain region of Australia. Eight field experiments were broadcast with weed seed before sowing wheat or barley, in which the emerged weeds were then treated with 4 herbicide doses (0, 25, 50, 100% of recommended rates). Yield reduction from untreated weeds was on average 4 times greater in wheat than in barley, with greater losses from A. ludoviciana than P. paradoxa. Barley did not affect weed emergence, but suppressed weed tiller density and, to a lesser extent, the number of weed seeds per tiller. Seed production was, on average, 4340 and 5105 seeds/m2 for A. ludoviciana and P. paradoxa, respectively, in untreated wheat compared with 555 and 50 seeds/m2 in untreated barley. Weed seed production following treatment with 25% herbicide rate in barley was similar or less than that after treatment with 100% herbicide rate in wheat. Overall, 25% herbicide rate was optimal for both conserving yield and minimising weed seed production in barley. For wheat, maximum yield was achieved with 50% herbicide but weed seed production was lowest with 100% herbicide rate. This indicates that weeds can be effectively controlled in barley with considerably less herbicide than required in wheat, highlighting the importance of including barley as a part of weed management strategies that aim to reduce herbicide inputs.

scholarly journals Late-Season Weed Management to Stop Viable Weed Seed Production

Weed Science ◽  
2016 ◽  
Vol 64 (1) ◽  
pp. 112-118 ◽  
Author(s):  
Erin C. Hill ◽  
Karen A. Renner ◽  
Mark J. VanGessel ◽  
Robin R. Bellinder ◽  
Barbara A. Scott
Keyword(s):  
Seed Production ◽  
Weed Management ◽  
Viable Seed ◽  
Weed Seed ◽  
Common Ragweed ◽  
Common Lambsquarters ◽  
Late Season ◽  
Giant Foxtail ◽  
Immature Seeds ◽  
Mature Seeds

Integrated weed management (IWM) for agronomic and vegetable production systems utilizes all available options to effectively manage weeds. Late-season weed control measures are often needed to improve crop harvest and stop additions to the weed seed bank. Eliminating the production of viable weed seeds is one of the key IWM practices. The objective of this research was to determine how termination method and timing influence viable weed seed production of late-season weed infestations. Research was conducted in Delaware, Michigan, and New York over a 2-yr period. The weeds studied included: common lambsquarters, common ragweed, giant foxtail, jimsonweed, and velvetleaf. Three termination methods were imposed: cutting at the plant base (simulating hand hoeing), chopping (simulating mowing), and applying glyphosate. The three termination timings were flowering, immature seeds present, and mature seeds present. Following termination, plants were stored in the field in mesh bags until mid-Fall when seeds were counted and tested for viability. Termination timing influenced viable seed development; however, termination method did not. Common ragweed and giant foxtail produced viable seeds when terminated at the time of flowering. All species produced some viable seed when immature seeds were present at the time of termination. The time of viable seed formation varied based on species and site-year, ranging from plants terminated the day of flowering to 1,337 growing degree d after flowering (base 10, 0 to 57 calendar d). Viable seed production was reduced by 64 to 100% when common lambsquarters, giant foxtail, jimsonweed, and velvetleaf were terminated with immature seeds present, compared to when plants were terminated with some mature seeds present. Our results suggest that terminating common lambsquarters, common ragweed, and giant foxtail prior to flowering, and velvetleaf and jimsonweed less than 2 and 3 wk after flowering, respectively, greatly reduces weed seed bank inputs.

Seeding rate and row spacing affect flax yields and weed interference

1996 ◽  
Vol 76 (3) ◽  
pp. 537-544 ◽  
Author(s):  
F. C. Stevenson ◽  
A. T. Wright
Keyword(s):  
Seed Yield ◽  
Weed Management ◽  
Management Practices ◽  
The Other ◽  
Integrated Weed Management ◽  
Row Spacing ◽  
Flax Seed ◽  
Seeding Rate ◽  
Weed Interference ◽  
Interference Study

Seeding rate and row spacing are management practices that affect flax seed yield. Two experiments were conducted from 1988 to 1990 to determine the influence of flax seeding rates (300, 600, and 900 seeds m−2) and row spacings (9, 18, and 27 cm). One was a flax-weed interference study (three sites) and the other was a weed-free study (13 sites). In the presence of weeds, increasing seeding rate from 300 to 900 seeds m−2 improved flax seed yield by 180 kg ha−1, and reduced broadleaf weed yields by 300 kg ha−1 and grassy weed yields by 180 kg ha−1. In weed-free conditions, seed yield was not affected by seeding rate. Row spacing did not affect flax yield and had minor effects on weed yields when weeds were not controlled. When weeds were controlled, seed yield in the 9-cm row spacing was 9% (15% in the flax-weed interference study) greater than in the two wider row spacings. Seeding rate and row spacing independently influenced flax yield, and their effect was consistent among sites with weeds present, but was not consistent when weeds were controlled. Our results showed that flax seeding rate was an important component of integrated weed management. Key words: Flax, seeding rate, row spacing, weed interference

Sign in / Sign up

Export Citation Format

Share Document