THERMAL WAVES AT THE INTERFACE OF AN EVAPORATING LIQUID POOL

2018 ◽  
Author(s):  
Lu Qiu ◽  
Fei Duan
Keyword(s):  
1991 ◽  
Author(s):  
David E. Ramaker ◽  
K. C. Adiga ◽  
H. Zhang ◽  
M. Pivovarov ◽  
S. W. Baek

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3681
Author(s):  
Guoliang Liu ◽  
Haibiao Lu ◽  
Bin Li ◽  
Chenxi Ji ◽  
Jiangshan Zhang ◽  
...  

A mathematical model coupled with electromagnetic field has been developed to simulate the transient turbulence flow and initial solidification in a slab continuous casting mold under different electromagnetic stirring (EMS) currents and casting speeds. Through comparing the magnetic flux density, flow field with measured results, the reliability of the mathematical model is proved. The uniform index of solidified shell thickness has been introduced to judge the uniformity of the solidified shell. The results show that a horizonal recirculation flow has been generated when EMS is applied, and either accelerated or decelerated regions of flow field are formed in the liquid pool. Large EMS current and low casting speed may cause the plug flow near the mold narrow face and a suitable EMS current can benefit to the uniform growth of solidified shell. Meanwhile, an industrial test exhibits that EMS can weaken the level fluctuation and number density of inclusion. Overall, a rational EMS current range is gained, when the casting speed is 1.2 m/min, the rational EMS current is 500–600 A.


Author(s):  
Stefan Puttinger ◽  
Mahdi Saeedipour

AbstractThis paper presents an experimental investigation on the interactions of a deflected submerged jet into a liquid pool with its above interface in the absence and presence of an additional lighter liquid. Whereas the former is a free surface flow, the latter mimics a situation of two stratified liquids where the liquid-liquid interface is disturbed by large-scale motions in the liquid pool. Such configurations are encountered in various industrial applications and, in most cases, it is of major interest to avoid the entrainment of droplets from the lighter liquid into the main flow. Therefore, it is important to understand the fluid dynamics in such configurations and to analyze the differences between the cases with and without the additional liquid layer. To study this problem, we applied time-resolved particle image velocimetry experiments with high spatial resolution. A detailed data analysis of a small layer beneath the interface shows that although the presence of an additional liquid layer stabilizes the oscillations of the submerged jet significantly, the amount of kinetic energy, enstrophy, and velocity fluctuations concentrated in the proximity of the interface is higher when the oil layer is present. In addition, we analyze the energy distribution across the eigenmodes of a proper orthogonal distribution and the distribution of strain and vortex dominated regions. As the main objective of this study, these high-resolution time-resolved experimental data provide a validation platform for the development of new models in the context of the volume of fluid-based large eddy simulation of turbulent two-phase flows.


1995 ◽  
Vol 117 (1) ◽  
pp. 37-42 ◽  
Author(s):  
J. R. Vincent ◽  
S. R. Gollahalli

The risk of accidental spills and possible fires is high in the storage and handling of large quantities of flammable liquids. Such liquid pool fires are generally buoyancy-driven and emit a large fraction of their heat release in the form of radiation. Ignition and combustion characteristics of liquid pools depend on the design parameters such as diameter, spacing, and shape of the pools. This laboratory scale study was conducted to determine the effects of these parameters on the characteristics of multiple liquid pool fires. The measurements reported include pool surface regression rate, flame height, temperature, and concentrations of carbon dioxide, soot, and oxygen.


2007 ◽  
Vol 42 (4) ◽  
pp. 249-264 ◽  
Author(s):  
Brian Y. Lattimer ◽  
Javier Trelles
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document