scholarly journals Time-resolved PIV measurements of a deflected submerged jet interacting with liquid-gas and liquid-liquid interfaces

2021 ◽  
Author(s):  
Stefan Puttinger ◽  
Mahdi Saeedipour
Keyword(s):  
Liquid Layer ◽  
Large Scale ◽  
Free Surface Flow ◽  
Industrial Applications ◽  
Liquid Pool ◽  
Surface Flow ◽  
Two Phase ◽  
Time Resolved ◽  
Submerged Jet ◽  
Major Interest

AbstractThis paper presents an experimental investigation on the interactions of a deflected submerged jet into a liquid pool with its above interface in the absence and presence of an additional lighter liquid. Whereas the former is a free surface flow, the latter mimics a situation of two stratified liquids where the liquid-liquid interface is disturbed by large-scale motions in the liquid pool. Such configurations are encountered in various industrial applications and, in most cases, it is of major interest to avoid the entrainment of droplets from the lighter liquid into the main flow. Therefore, it is important to understand the fluid dynamics in such configurations and to analyze the differences between the cases with and without the additional liquid layer. To study this problem, we applied time-resolved particle image velocimetry experiments with high spatial resolution. A detailed data analysis of a small layer beneath the interface shows that although the presence of an additional liquid layer stabilizes the oscillations of the submerged jet significantly, the amount of kinetic energy, enstrophy, and velocity fluctuations concentrated in the proximity of the interface is higher when the oil layer is present. In addition, we analyze the energy distribution across the eigenmodes of a proper orthogonal distribution and the distribution of strain and vortex dominated regions. As the main objective of this study, these high-resolution time-resolved experimental data provide a validation platform for the development of new models in the context of the volume of fluid-based large eddy simulation of turbulent two-phase flows.

scholarly journals A Computational Fluid Dynamics Model for a Water Vortex Power Plant as Platform for Etho- and Ecohydraulic Research

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 639
Author(s):  
Dennis Powalla ◽  
Stefan Hoerner ◽  
Olivier Cleynen ◽  
Nadine Müller ◽  
Jürgen Stamm ◽  
...  
Keyword(s):  
Power Plant ◽  
Numerical Model ◽  
Large Scale ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Field Measurements ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Navier Stokes ◽  
Two Phase

The objective of the present paper is to develop a validated numerical model of a water vortex power plant that serves as a digital twin for further studies such as assessments of the ethohydraulic characteristics or the performance of such devices. The reference for the validation process is a large-scale hydraulic installation equipped with a full-scale water vortex power plant prototype installed in Dresden (Germany), where flow field measurements were carried out using three-dimensional Acoustic Doppler Velocimetry. The numerical model was implemented within the software package Star-CCM+. The unsteady, two-phase flow was solved with the Reynolds-Averaged Navier–Stokes equations in a Eulerian Multiphase approach, deploying a Volume of Fluid method to describe the free-surface flow. Water level and flow velocities were systematically compared in key areas of the device, demonstrating that the simulation is in good agreement with experimental observations. Relative differences are limited to at most 4% regarding water height in the system, and even the much more challenging velocity fields are reproduced with typical relative errors of roughly 10%. This validates the ability of the model to model the challenging flow conditions found in a water vortex power plant, enabling subsequent studies of the characteristics of this power plant concerning fish migration.

Turbulence Modeling for Free-Surface Flow Simulations in Offshore Applications

2015 ◽  
Author(s):  
Henri J. L. van der Heiden ◽  
Arthur E. P. Veldman ◽  
Roel Luppes ◽  
Peter van der Plas ◽  
Joop Helder ◽  
...  
Keyword(s):  
Eddy Viscosity ◽  
Cfd Simulation ◽  
Turbulence Modeling ◽  
Free Surface Flow ◽  
Industrial Applications ◽  
Surface Flow ◽  
Absorbing Boundary Conditions ◽  
Wave Impact ◽  
Offshore Industry ◽  
Hydrodynamic Wave

To study extreme hydrodynamic wave impact in offshore and coastal engineering, the VOF-based CFD simulation tool ComFLOW is being developed. Recently, much attention has been paid to turbulence modeling, local grid refinement, wave propagation and absorbing boundary conditions. Here we will focus on the design of the turbulence model, which should be suitable for the coare grids as used in industrial applications. Thereto a blend of a QR-model and a regularization model has been designed, in combination with a dedicated wall model. The QR-model belongs to a class of modern eddy-viscosity models, where the amount of turbulent eddy viscosity is kept minimal. The performance of the model will be demonstrated with several applications relevant to the offshore industry. For validation, experiments have been carried out at MARIN.

scholarly journals The Finite Element Numerical Investigation of Free Surface Newtonian and Non-Newtonian Fluid Flows in the Rectangular Tanks

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Puyang Gao
Keyword(s):  
Finite Element ◽  
Free Surface ◽  
Level Set ◽  
Newtonian Fluid ◽  
Mass Conservation ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Two Phase ◽  
Navier Stokes Equation ◽  
Correction Technique

In this paper, we develop a new computational framework to investigate the sloshing free surface flow of Newtonian and non-Newtonian fluids in the rectangular tanks. We simulate the flow via a two-phase model and employ the fixed unstructured mesh in the computation to avoid the mesh distortion and reconstruction. As for the solution of Navier–Stokes equation, we utilize the SUPG finite element method based on the splitting scheme. The same order interpolation functions are then used for velocity and pressure. Moreover, the moving interface is captured via the concise level set method. We take advantage of the implicit discontinuous Galerkin method to handle the solution of level set and its reinitialization equations. A mass correction technique is also added to ensure the mass conservation property. The dam break-free surface flow is simulated firstly to demonstrate the validity of our mathematical model. In addition, the sloshing Newtonian fluid in the tank with flat and rough bottoms is considered to illustrate the feasibility and robustness of our computational scheme. Finally, the development of free surface for non-Newtonian fluid is also studied in the two tanks, and the influence of power-law index on the sloshing fluid flow is analyzed.

Flow Field Study and Structure Optimization of Pelton Tubine Bucket

2013 ◽  
Vol 655-657 ◽  
pp. 144-148
Author(s):  
Xia Ma ◽  
Wu Gui Hua ◽  
Jie Li ◽  
Gang Li
Keyword(s):  
Free Surface ◽  
Homogeneous Model ◽  
Structure Optimization ◽  
Free Surface Flow ◽  
Flow Patterns ◽  
Surface Flow ◽  
Two Phase ◽  
Pelton Turbine ◽  
Flow Visualizations ◽  
Turbine Model

The aim of the paper is to present the results of investigations conducted on the free surface flow in a Pelton turbine model bucket. Unsteady numerical simulations, based on the two-phase homogeneous model, are performed together with flow visualizations. The results obtained allow defining five distinct zones in the bucket from the flow patterns. The flow patterns in the buckets are analyzed from the results. An investigation of the momentum transfer between the water particles and the bucket is performed, showing the regions of the bucket surface that contribute the most to the torque. The study is also conducted for the backside of the bucket, evidencing a probable Coanda interaction between the bucket cutout area and the Water jet.

scholarly journals CFD Code Validation against Stratified Air-Water Flow Experimental Data

2008 ◽  
Vol 2008 ◽  
pp. 1-7 ◽  
Author(s):  
F. Terzuoli ◽  
M. C. Galassi ◽  
D. Mazzini ◽  
F. D'Auria
Keyword(s):  
Experimental Data ◽  
Numerical Simulations ◽  
Water Flow ◽  
Nuclear Reactor ◽  
Cold Water ◽  
Three Dimensional ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Two Phase ◽  
Code Validation

Pressurized thermal shock (PTS) modelling has been identified as one of the most important industrial needs related to nuclear reactor safety. A severe PTS scenario limiting the reactor pressure vessel (RPV) lifetime is the cold water emergency core cooling (ECC) injection into the cold leg during a loss of coolant accident (LOCA). Since it represents a big challenge for numerical simulations, this scenario was selected within the European Platform for Nuclear Reactor Simulations (NURESIM) Integrated Project as a reference two-phase problem for computational fluid dynamics (CFDs) code validation. This paper presents a CFD analysis of a stratified air-water flow experimental investigation performed at the Institut de Mécanique des Fluides de Toulouse in 1985, which shares some common physical features with the ECC injection in PWR cold leg. Numerical simulations have been carried out with two commercial codes (Fluent and Ansys CFX), and a research code (NEPTUNE CFD). The aim of this work, carried out at the University of Pisa within the NURESIM IP, is to validate the free surface flow model implemented in the codes against experimental data, and to perform code-to-code benchmarking. Obtained results suggest the relevance of three-dimensional effects and stress the importance of a suitable interface drag modelling.

scholarly journals Flow in a Pelton Turbine Bucket: Numerical and Experimental Investigations

2005 ◽  
Vol 128 (2) ◽  
pp. 350-358 ◽  
Author(s):  
Alexandre Perrig ◽  
François Avellan ◽  
Jean-Louis Kueny ◽  
Mohamed Farhat ◽  
Etienne Parkinson
Keyword(s):  
Homogeneous Model ◽  
Free Surface Flow ◽  
Flow Patterns ◽  
Surface Flow ◽  
Experimental Investigations ◽  
Pressure Measurements ◽  
Two Phase ◽  
Pelton Turbine ◽  
Flow Visualizations ◽  
Turbine Bucket

The aim of the paper is to present the results of investigations conducted on the free surface flow in a Pelton turbine model bucket. Unsteady numerical simulations, based on the two-phase homogeneous model, are performed together with wall pressure measurements and flow visualizations. The results obtained allow defining five distinct zones in the bucket from the flow patterns and the pressure signal shapes. The results provided by the numerical simulation are compared for each zone. The flow patterns in the buckets are analyzed from the results. An investigation of the momentum transfer between the water particles and the bucket is performed, showing the regions of the bucket surface that contribute the most to the torque. The study is also conducted for the backside of the bucket, evidencing a probable Coanda interaction between the bucket cutout area and the water jet.

scholarly journals Early-time free-surface flow driven by a deforming boundary

2015 ◽  
Vol 767 ◽  
pp. 811-841 ◽  
Author(s):  
C. Frederik Brasz ◽  
Craig B. Arnold ◽  
Howard A. Stone ◽  
John R. Lister
Keyword(s):  
Free Surface ◽  
Numerical Simulations ◽  
Liquid Layer ◽  
Early Time ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Solid Boundary ◽  
Jet Formation ◽  
Domain Perturbation ◽  
Quiescent Liquid

AbstractWhen a solid boundary deforms rapidly into a quiescent liquid layer, a flow is induced that can lead to jet formation. An asymptotic analytical solution is presented for this flow, driven by a solid boundary deforming with dimensionless vertical velocity $V_{b}(x,t)={\it\epsilon}(1+\cos x)\,f(t)$, where the amplitude ${\it\epsilon}$ is small relative to the wavelength and the time dependence $f(t)$ approaches 0 for large $t$. Initially, the flow is directed outwards from the crest of the deformation and slows with the slowing of the boundary motion. A domain-perturbation method is used to reveal that, when the boundary stops moving, nonlinear interactions with the free surface leave a remnant momentum directed back towards the crest, and this momentum can be a precursor to jet formation. This scenario arises in a laser-induced printing technique in which an expanding blister imparts momentum into a liquid film to form a jet. The analysis provides insight into the physics underlying the interaction between the deforming boundary and free surface, in particular, the dependence of the remnant flow on the thickness of the liquid layer and the deformation amplitude and wavelength. Numerical simulations are used to show the range of validity of the analytical results, and the domain-perturbation solution is extended to an axisymmetric domain with a Gaussian boundary deformation to compare with previous numerical simulations of blister-actuated laser-induced forward transfer.

A Two-Phase Flow Model with VOF for Free Surface Flow Problems

2012 ◽  
Vol 232 ◽  
pp. 279-283 ◽  
Author(s):  
Wei Zhang ◽  
You Hong Tang ◽  
Cheng Bi Zhao ◽  
Cheng Zhang
Keyword(s):  
Free Surface ◽  
Flow Model ◽  
Two Phase Flow ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Phase Model ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Problems ◽  
Fluid Sloshing

A numerical model based on the two-phase flow model for incompressible viscous fluid with a complex free surface has been developed in this study. The two-step projection method is employed to solve the Navier–Stokes equations in the numerical solutions, and finite difference method on a staggered grid is used throughout the computation. The two-order accurate volume of fluid (VOF) method is used to track the distorted and broken free surfaces. The two-phase model is first validated by simulating the dam break over a dry bed, in which the numerical results and experimental data agree well. Then 2-D fluid sloshing in a horizontally excited rectangular tank at different excitation frequencies is simulated using this two-phase model. The results of this study show that the two-phase flow model with VOF method is a potential tool for the simulation of nonlinear fluid sloshing. These studies demonstrate the capability of the two-phase model to simulate free surface flow problems with considering air movement effects.

Sign in / Sign up

Export Citation Format

Share Document