THERMAL RESISTANCE OPTIMIZATION OF MICROCHANNEL HEAT SINKS USING LIQUID GALLIUM COMPARED TO WATER BY ADJUSTING CHANNEL WIDTH AND FIN WIDTH

2018 ◽  
Author(s):  
Xiong Xiang ◽  
Aiwu Fan ◽  
Wei Liu
Keyword(s):  
Thermal Resistance ◽  
Heat Sinks ◽  
Channel Width ◽  
Liquid Gallium ◽  
Microchannel Heat Sinks

Flow Maldistribution Effects on the Temperature Uniformity in Double-Layered Microchannel Heat Sinks

2019 ◽  
Author(s):  
Carlo Nonino ◽  
Stefano Savino
Keyword(s):  
Thermal Resistance ◽  
Flow Rate ◽  
Heat Exchangers ◽  
Total Mass ◽  
Cross Flow ◽  
Heat Sinks ◽  
Temperature Uniformity ◽  
Inlet Velocity ◽  
Microchannel Heat Sinks ◽  
Flow Maldistribution

Abstract A numerical investigation is carried out on the effects of flow maldistribution on the temperature uniformity and overall thermal resistance in double-layered microchannel heat sinks. Different flow maldistribution models accounting for the effects of some typical header designs are considered together with different combinations of the average inlet velocity in the two layers of microchannels for a given total mass flow rate. The numerical simulations are carried out using an in-house FEM procedure previously developed by the authors for the analysis of cross-flow microchannel heat exchangers.

scholarly journals Numerical Study of Double-Layered Microchannel Heat Sinks with Different Cross-Sectional Shapes

Entropy ◽  
2018 ◽  
Vol 21 (1) ◽  
pp. 16 ◽  
Author(s):  
Daxiang Deng ◽  
Guang Pi ◽  
Weixun Zhang ◽  
Peng Wang ◽  
Ting Fu
Keyword(s):  
Pressure Drop ◽  
Thermal Resistance ◽  
Thermal Performance ◽  
Numerical Study ◽  
Heat Sinks ◽  
High Heat Flux ◽  
Pumping Power ◽  
Cross Sectional ◽  
Prime Concern ◽  
Microchannel Heat Sinks

This work numerically studies the thermal and hydraulic performance of double-layered microchannel heat sinks (DL-MCHS) for their application in the cooling of high heat flux microelectronic devices. The superiority of double-layered microchannel heat sinks was assessed by a comparison with a single-layered microchannel heat sink (SL-MCHS) with the same triangular microchannels. Five DL-MCHSs with different cross-sectional shapes—triangular, rectangular, trapezoidal, circular and reentrant Ω-shaped—were explored and compared. The results showed that DL-MCHS decreased wall temperatures and thermal resistance considerably, induced much more uniform wall temperature distribution, and reduced the pressure drop and pumping power in comparison with SL-MCHS. The DL-MCHS with trapezoidal microchannels performed the worst with regard to thermal resistance, pressure drop, and pumping power. The DL-MCHS with rectangular microchannels produced the best overall thermal performance and seemed to be the optimum when thermal performance was the prime concern. Nevertheless, the DL-MCHS with reentrant Ω-shaped microchannels should be selected when pumping power consumption was the most important consideration.

A Numerical Parametric Study of Flow and Heat Transfer in Circular and Zig-Zag Square Microchannel Heat Sinks

2016 ◽  
Author(s):  
Wenming Li ◽  
Fanghao Yang ◽  
Tamanna Alam ◽  
Congcong Ren
Keyword(s):  
Pressure Drop ◽  
Thermal Resistance ◽  
Parametric Study ◽  
Orientation Angle ◽  
Hydraulic Diameter ◽  
Heat Sinks ◽  
Microchannel Heat Sinks ◽  
Circular Microchannel ◽  
Square Microchannel ◽  
Numerical Parametric Study

This paper aims to study the overall performance of circular and zig-zag square microchannel heat sinks with single phase liquid flow via a numerical parametric study. Thermal resistance and pressure drop when subjected to key geometric parameters such as hydraulic diameter, orientation, and connector length is numerically investigated with Reynolds number ranging from 50 to 500. Specifically, the hydraulic diameter is varied from 100 μm to 300 μm with an increment of 100 μm; the orientation angle of 10°, 20° and 30° is studied. A figure of merit (FOM) involving both the thermal resistance and pressure drop is introduced to evaluate the performance. Results show that hydraulic diameter is critical to thermal resistance and pressure drop compared to orientation angle. Zig-zag microchannel heat sink shows better performance compared with heat sinks with circular microchannel. FOM varies considerably with the change in hydraulic diameter and flow rate.

Two-Phase Stacked Microchannel Heat Sinks for Microelectronics Cooling

2005 ◽  
Vol 2 (2) ◽  
pp. 122-131
Author(s):  
Pradeep Hegde ◽  
K.N. Seetharamu ◽  
P.A. Aswatha Narayana ◽  
Zulkifly Abdullah
Keyword(s):  
Finite Element ◽  
Pressure Drop ◽  
Thermal Resistance ◽  
Heat Sink ◽  
Two Phase Flow ◽  
Heat Sinks ◽  
Phase Flow ◽  
Pumping Power ◽  
Two Phase ◽  
Microchannel Heat Sinks

Stacked microchannel heat sinks with two-phase flow have been analyzed using the Finite Element Method (FEM). The present method is a simple and practical approach for analyzing the thermal performance of single or multi layered microchannel heat sinks with either single or two-phase flow. A unique 10 noded finite element is used for the channel discretization. Two-phase thermal resistance, pressure drop and pumping power of single, double and triple stack microchannel heat sinks are determined at different base heat fluxes ranging from 150 W/cm2 to 300 W/cm2. The temperature distribution along the length of the microchannel is also plotted. It is found that stacked microchannel heat sinks with two-phase flow are thermally more efficient than two-phase single layer microchannel heat sinks, both in terms of thermal resistance and pumping power requirements. It is observed that the thermal resistance of a double stack microchannel heat sink with two-phase flow is about 40% less than that for a single stack heat sink. A triple stack heat sink yields a further 20% reduction in the thermal resistance and at the same time operates with about 30% less pumping power compared to a single stack heat sink. The effect of channel aspect ratio on the thermal resistance and pressure drop of stacked microchannel heat sinks with two-phase flow are also studied.

Sign in / Sign up

Export Citation Format

Share Document