scholarly journals ENTROPY GENERATION IN MAGNETOHYDRODYNAMIC RADIATIVE NON-NEWTONIAN DISSIPATIVE CONVECTION FLOW FROM AN INCLINED PLANE: NUMERICAL STUDY

2020 ◽  
Vol 11 (4) ◽  
pp. 297-326
Author(s):  
B. Md. Hidayathulla Khan ◽  
Shaik Abdul Gaffar ◽  
Khalil-Ur-Rehman ◽  
Osman Anwar Beg
Keyword(s):  
Entropy Generation ◽  
Numerical Study ◽  
Convection Flow ◽  
Inclined Plane

Impact of periodic magnetic source on natural convection and entropy generation of ferrofluids in a baffled cavity

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Harun Zontul ◽  
Hudhaifa Hamzah ◽  
Besir Sahin
Keyword(s):  
Natural Convection ◽  
Entropy Generation ◽  
Numerical Study ◽  
Magnetic Domain ◽  
Vertical Direction ◽  
Convection Flow ◽  
Bejan Number ◽  
Content Type ◽  
Domain Structures ◽  
Magnetic Source

Purpose This paper aims to exhibit a numerical study to analyze the influence of a periodic magnetic source on free convection flow and entropy generation of a ferrofluid in a baffled cavity. In this study, ferrofluid nanofluid was selected due to its ability to image magnetic domain structures within the cavity. The non-uniform magnetic source is considered as a sinusoidal distribution in the vertical direction. Design/methodology/approach The finite volume technique is used to evaluate the steady two-dimensional partial differential equations that govern the flow with its corresponding boundary conditions. Findings The obtained results indicate that a significant increase in the average Nusselt number can be achieved with the use of the periodic magnetic source instead of a uniform case. In addition, the effectiveness of the adiabatic baffle notably depends on its position and Rayleigh number. Regardless of the values of period and Hartmann numbers, the periodic magnetic source has a higher entropy generation and lower Bejan number than the uniform magnetic source. Originality/value The novelty of this research lies in applying a periodic magnetic source on the natural convection of ferrofluids in a baffled cavity.

scholarly journals Entropy generation due to the mixed convection flow of MWCNT−MgO/water hybrid nanofluid in a vented complex shape cavity

2020 ◽  
Vol 307 ◽  
pp. 01007
Author(s):  
Mahdi Benzema ◽  
Youb Khaled Benkahla ◽  
Ahlem Boudiaf ◽  
Seif-Eddine Ouyahia ◽  
Mohammed El Ganaoui
Keyword(s):  
Mixed Convection ◽  
Entropy Generation ◽  
Complex Shape ◽  
Volume Fraction ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Convection Flow ◽  
Hybrid Nanofluid ◽  
Bejan Number ◽  
Inclined Plate

This paper reports a numerical study of mixed convection heat transfer with entropy generation in a vented complex shape cavity filled with MWCNT−MgO (15:85 vol %) /water hybrid nanofluid. A hot source is placed at the mid potion of the inclined plate of the enclosure, while the rest of the rigid walls are adiabatic. A thermo-dependent correlations proposed by [12] for the dynamic viscosity and the thermal conductivity, especially developed for the considered fluid, are used. After validation of the model, the analysis has been done for a Reynolds numbers ranging from 10 to 600 and total nanoparticles volume fraction ranging from 0.0 to 0.02 using the finite volume method. The predicted results of streamlines, isotherms, isentropic lines, average Nusselt number, average entropy generation and average Bejan number are the main focus of interest in the present paper.

scholarly journals Numerical study of bio-convection flow of magneto-cross nanofluid containing gyrotactic microorganisms with activation energy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Qiu-Hong Shi ◽  
Aamir Hamid ◽  
M. Ijaz Khan ◽  
R. Naveen Kumar ◽  
R. J. Punith Gowda ◽  
...  
Keyword(s):  
Radiation Effects ◽  
Numerical Study ◽  
Source Parameters ◽  
Lewis Number ◽  
Convective Boundary Condition ◽  
Convection Flow ◽  
Convective Boundary ◽  
Similarity Transformations ◽  
Cross Nanoliquid ◽  
Source Sink

AbstractIn this study, a mathematical model is developed to scrutinize the transient magnetic flow of Cross nanoliquid past a stretching sheet with thermal radiation effects. Binary chemical reactions and heat source/sink effects along with convective boundary condition are also taken into the consideration. Appropriate similarity transformations are utilized to transform partial differential equations (PDE’s) into ordinary ones and then numerically tackled by shooting method. The impacts of different emerging parameters on the thermal, concentration, velocity, and micro-rotation profiles are incorporated and discussed in detail by means of graphs. Results reveal that, the escalation in magnetic parameter and Rayleigh number slowdowns the velocity and momentum of the fluid. The increase in Biot number, radiation and heat sink/source parameters upsurges the thermal boundary but, converse trend is seen for escalating Prandtl number. The density number of motile microorganisms acts as a growing function of bioconvection Lewis number and declining function of bioconvection Peclet number.

Entropy generation optimization for MHD natural convection of a nanofluid in porous media-filled enclosure with active parts and viscous dissipation

2017 ◽  
Vol 27 (2) ◽  
pp. 379-399 ◽  
Author(s):  
M.A. Mansour ◽  
Sameh Elsayed Ahmed ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Convection Flow ◽  
Negative Effects ◽  
Content Type ◽  
Volume Method

Purpose This paper aims to investigate the entropy generation due to magnetohydrodynamic natural convection flow and heat transfer in a porous enclosure filled with Cu-water nanofluid in the presence of viscous dissipation effect. The left and right walls of the cavity are thermally insulated. There are heated and cold parts, and these are placed on the bottom and top wall, respectively, whereas the remaining parts are thermally insulated. Design/methodology/approach The finite volume method is used to solve the dimensionless partial differential equations governing the problem. A comparison with previously published woks is presented and is found to be in an excellent agreement. Findings The minimization of entropy generation and local heat transfer according to different values of the governing parameters are presented in details. It is found that the presence of magnetic field has negative effects on the local entropy generation because of heat transfer and the local total entropy generation. Also, the increase in the heated part length leads to a decrease in the local Nusselt number. Originality/value This problem is original, as it has not been considered previously.

Second Law Analysis of Magnetorheological Rotational Flow With Viscous Dissipation

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
Abbas Hazbavi
Keyword(s):  
Magnetic Field ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Outer Cylinder ◽  
Base Flow ◽  
Convection Flow ◽  
Fluid Temperature ◽  
Brinkman Number ◽  
Fluid Elasticity

In this study, the influences of the applied magnetic field and fluid elasticity were investigated for a nonlinear viscoelastic fluid obeying the Carreau equation between concentric annulus where the inner cylinder rotates at a constant angular velocity and the outer cylinder is stationary. The governing motion and energy balance equations are coupled while viscous dissipation is taken into account, adding complexity to the already highly correlated set of differential equations. The numerical solution is obtained for the narrow gap limit and steady-state base flow. Magnetic field effect on local entropy generation due to steady two-dimensional laminar forced convection flow was investigated. This study was focused on the entropy generation characteristics and its dependency on various dimensionless parameters. The effects of the Hartmann number, the Brinkman number, the Deborah number, and the fluid elasticity on the stability of the flow were investigated. The application of the magnetic field induces a resistive force acting in the opposite direction of the flow, thus causing its deceleration. Moreover, the study shows that the presence of magnetic field tends to slowdown the fluid motion and thus increases the fluid temperature. However, the total entropy generation number decreases as the Hartmann number and fluid elasticity increase and it increases with increasing Brinkman number.

Effects of Energy Dissipation and Variable Thermal Conductivity on Entropy Generation Rate in Mixed Convection Flow

2018 ◽  
Vol 10 (4) ◽  
Author(s):  
Muhammad Qasim ◽  
Muhammad Idrees Afridi
Keyword(s):  
Thermal Conductivity ◽  
Energy Dissipation ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Variable Thermal Conductivity ◽  
Convection Flow ◽  
Mixed Convection Flow ◽  
Entropy Generation Number ◽  
Similarity Transformations ◽  
Generation Number

Analysis of entropy generation in mixed convection flow over a vertically stretching sheet has been carried out in the presence of variable thermal conductivity and energy dissipation. Governing equations are reduced to self-similar ordinary differential equations via similarity transformations and are solved numerically by applying shooting and fourth-order Runge–Kutta techniques. The expressions for entropy generation number and Bejan number are also obtained by using similarity transformations. The influence of embedding physical parameters on quantities of interest is discussed through graphical illustrations. The results reveal that entropy generation number increases significantly in the vicinity of stretching surface and gradually dies out as one move away from the sheet. Also, the entropy generation number decreases with an increase in temperature difference parameter. Moreover, entropy generation number enhances with an enhancement in the Eckert number, Prandtl number, and variable thermal conductivity parameter.

Sign in / Sign up

Export Citation Format

Share Document