Demonstrating the Biobriquettes Production using Variations in Particle Size and Binder Concentration using Audio-Visual to Vocational Students

Fluidized-bed agglomeration (FBA) is known to modify the structure and rheology of food powders. In this study, guar gum (GG) powders with various concentrations of sucrose binder (0%, 10%, 20%, or 30%) were subjected to fluidized-bed agglomeration. Subsequently, changes in the characteristics of the GG powders were evaluated by using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), particle size distribution (PSD) analysis, and rheological and dispersibility measurements. SEM images and FTIR spectra revealed surface morphology changes and structural modification, respectively, in the original GG powder after FBA, although the changes observed in FTIR spectra were only slightly dependent on sucrose concentration at low concentrations (0–20%). XRD patterns confirmed that the crystallinity of the GG powder was affected by FBA, but not greatly so by binder concentration. The PSD results showed that the GG particle size was increased by FBA and there was a clear relationship between sucrose concentration (10–30%) and mean particle size. The rheological behavior and dispersibility of GG (properties that are known to be affected by the structure of a powder) were also influenced by sucrose concentration. To sum up, FBA and the concentration of sucrose binder used can serve as factors for modifying GG powder.

Download Full-text

Development of Job sheet Application in Making Biobriquette Based on Coconut (Cocos nucifera) Coir with Variation of Particle Size and Banana (Musa paradisica) Peels for Vocational Students

Journal of Engineering Education Transformations ◽

10.16920/jeet/2020/v34i0/157879 ◽

2020 ◽

Vol 34 (0) ◽

pp. 132

Author(s):

Asep Bayu Dani Nandiyanto ◽

Lisza Alya Rachmat ◽

Dwi Lestari Rahayu ◽

Nissa Nur Azizah ◽

Dwi Fitria Al Husaeni

Keyword(s):

Particle Size ◽

Cocos Nucifera ◽

Vocational Students

Download Full-text

Coating Binder Migration and Affected Parameters: Influence of Pigments and Base Paper

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.791-793.192 ◽

2013 ◽

Vol 791-793 ◽

pp. 192-195

Author(s):

Zhao Hui Zhen ◽

Zheng Shun Wang

Keyword(s):

Particle Size ◽

Calcium Carbonate ◽

Coating Layer ◽

Pigment Content ◽

Coating Surface ◽

Base Paper ◽

Small Base ◽

Binder Concentration

The Paper studied the effects of pigments and base paper on binder migration and affected factors. The z-direction distribution of the coating binder which was tagged with Br in coating layer and its concentration in coating surface were examined quantitatively by using SEM-EDXA and ESCA analysis. The results showed that the increase of the ratio of calcium carbonate in the pigment content, coating surface binder concentration increased, and coating surface binder concentration increased with the increase of particle size of pigments. The result also indicated to small base paper absorbency, coating surface has high binder migration level, the coating layer bottom (base paper direction) has low binder concentration. To high absorbency base paper, the opposite is true.

Download Full-text

Microstructural characterization of laser-melted/roller-quenched dicalcium silicate

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100104972 ◽

1988 ◽

Vol 46 ◽

pp. 582-583

Author(s):

C. J. Chan ◽

K. R. Venkatachari ◽

W. M. Kriven ◽

J. F. Young

Keyword(s):

Particle Size ◽

Raw Materials ◽

Shape Change ◽

Microstructural Characterization ◽

Particle Size Effect ◽

Dicalcium Silicate ◽

Laser Melting ◽

Uniform Size ◽

Cell Shape Change ◽

Wide Range

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

Download Full-text

Analytical Electron Microscopy study of two vehicle-aged automotive exhaust catalysts having dissimilar activities

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100153336 ◽

1989 ◽

Vol 47 ◽

pp. 272-273

Author(s):

Sooho Kim ◽

M. J. D’Aniello

Keyword(s):

Electron Microscopy ◽

Particle Size ◽

Noble Metal ◽

Catalyst Deactivation ◽

Analytical Electron Microscopy ◽

Microscopy Study ◽

Metal Particles ◽

Automotive Exhaust ◽

Exhaust Catalysts ◽

Analytical Electron

Automotive catalysts generally lose-agtivity during vehicle operation due to several well-known deactivation mechanisms. To gain a more fundamental understanding of catalyst deactivation, the microscopic details of fresh and vehicle-aged commercial pelleted automotive exhaust catalysts containing Pt, Pd and Rh were studied by employing Analytical Electron Microscopy (AEM). Two different vehicle-aged samples containing similar poison levels but having different catalytic activities (denoted better and poorer) were selected for this study.The general microstructure of the supports and the noble metal particles of the two catalysts looks similar; the noble metal particles were generally found to be spherical and often faceted. However, the average noble metal particle size on the poorer catalyst (21 nm) was larger than that on the better catalyst (16 nm). These sizes represent a significant increase over that found on the fresh catalyst (8 nm). The activity of these catalysts decreases as the observed particle size increases.

Download Full-text