scholarly journals Characterization of additively manufactured AlSilOMg cubes with different porosities

2021 ◽  
Vol 121 (4) ◽  
Author(s):  
C. Taute ◽  
H. Möller ◽  
A. du Plessis ◽  
M. Tshibalanganda ◽  
M. Leary
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Structural Integrity ◽  
Lead Times ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Sample Characteristics

SYNOPSIS Additive manufacturing can be used to produce complex and custom geometries, consolidating different parts into one, which in turn reduces the required number of assemblies and allows distributed manufacturing with short lead times. Defects, such as porosity and surface roughness, associated with parts manufactured by laser powder bed fusion, can severely limit industrial application. The effect these defects have on corrosion and hence long-term structural integrity must also be taken into consideration. The aim of this paper is to report on the characterization of porosity in samples produced by laser powder bed fusion, with the differences in porosity induced by changes in the process parameters. The alloy used in this investigation is AlSi10Mg, which is widely used in the aerospace and automotive industries. The sample characteristics, obtained by X-ray tomography, are reported. The design and production of additively manufactured parts can be improved when these defects are better understood. Keywords: additive manufacturing, L-PBF, AlSi10Mg, porosity, surface roughness, density.

scholarly journals Understanding Laser Powder Bed Fusion Surface Roughness

2020 ◽  
Vol 142 (7) ◽  
Author(s):  
Jacob C. Snyder ◽  
Karen A. Thole
Keyword(s):  
Experimental Study ◽  
Surface Roughness ◽  
Additive Manufacturing ◽  
Process Parameters ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Comprehensive Understanding ◽  
Powder Bed ◽  
Manufacturing Methods ◽  
New Framework

Abstract Surface roughness is a well-known consequence of additive manufacturing methods, particularly powder bed fusion processes. To properly design parts for additive manufacturing, a comprehensive understanding of the inherent roughness is necessary. While many researchers have measured different surface roughness resultant from a variety of parameters in the laser powder bed fusion process, few have succeeded in determining causal relationships due to the large number of variables at play. To assist the community in understanding the roughness in laser powder bed fusion processes, this study explored several studies from the literature to identify common trends and discrepancies amongst roughness data. Then, an experimental study was carried out to explore the influence of certain process parameters on surface roughness. Through these comparisons, certain local and global roughness trends have been identified and discussed, as well as a new framework for considering the effect of process parameters on surface roughness.

Internal surface roughness enhancement of parts made by laser powder-bed fusion additive manufacturing

Vacuum ◽  
2020 ◽  
Vol 177 ◽  
pp. 109314 ◽  
Author(s):  
Usman Ali ◽  
Haniyeh Fayazfar ◽  
Farid Ahmed ◽  
Ehsan Toyserkani
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Internal Surface ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed

scholarly journals On the Relevance of Volumetric Energy Density in the Investigation of Inconel 718 Laser Powder Bed Fusion

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 538 ◽  
Author(s):  
Fabrizia Caiazzo ◽  
Vittorio Alfieri ◽  
Giuseppe Casalino
Keyword(s):  
Surface Roughness ◽  
Energy Density ◽  
Process Parameters ◽  
Vickers Hardness ◽  
Powder Bed Fusion ◽  
Processing Conditions ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Fractional Density ◽  
Experimental Variation

Laser powder bed fusion (LPBF) can fabricate products with tailored mechanical and surface properties. In fact, surface texture, roughness, pore size, the resulting fractional density, and microhardness highly depend on the processing conditions, which are very difficult to deal with. Therefore, this paper aims at investigating the relevance of the volumetric energy density (VED) that is a concise index of some governing factors with a potential operational use. This paper proves the fact that the observed experimental variation in the surface roughness, number and size of pores, the fractional density, and Vickers hardness can be explained in terms of VED that can help the investigator in dealing with several process parameters at once.

Sign in / Sign up

Export Citation Format

Share Document