scholarly journals Estimation of diameter at breast height from mobile laser scanning data collected under a heavy forest canopy

2017 ◽  
Vol 63 (No. 9) ◽  
pp. 433-441 ◽  
Author(s):  
Čerňava Juraj ◽  
Tuček Ján ◽  
Koreň Milan ◽  
Mokroš Martin
Keyword(s):  
Laser Scanning ◽  
Forest Canopy ◽  
Mean Squared Error ◽  
Satellite System ◽  
Tree Level ◽  
Efficient Technology ◽  
Mobile Mapping ◽  
Mobile Mapping System ◽  
Global Navigation Satellite ◽  
Short Time

Mobile laser scanning (MLS) is time-efficient technology of geospatial data collection that proved its ability to provide accurate measurements in many fields. Mobile innovation of the terrestrial laser scanning has a potential to collect forest inventory data on a tree level from large plots in a short time. Valuable data, collected using mobile mapping system (MMS), becomes very difficult to process when Global Navigation Satellite System (GNSS) outages become too long. A heavy forest canopy blocking the GNSS signal and limited accessibility can make mobile mapping very difficult. This paper presents processing of data collected by MMS under a heavy forest canopy. DBH was estimated from MLS point cloud using three different methods. Root mean squared error varied between 2.65 and 5.57 cm. Our research resulted in verification of the influence of MLS coverage of tree stem on the accuracy of DBH data.

scholarly journals Processing Chain for Estimation of Tree Diameter from GNSS-IMU-Based Mobile Laser Scanning Data

2019 ◽  
Vol 11 (6) ◽  
pp. 615 ◽  
Author(s):  
Juraj Čerňava ◽  
Martin Mokroš ◽  
Ján Tuček ◽  
Michal Antal ◽  
Zuzana Slatkovská
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Forest Canopy ◽  
Point Clouds ◽  
Satellite System ◽  
Forest Road ◽  
Forest Mapping ◽  
Fitting Method ◽  
Progressive Technology ◽  
Global Navigation Satellite

Mobile laser scanning (MLS) is a progressive technology that has already demonstrated its ability to provide highly accurate measurements of road networks. Mobile innovation of the laser scanning has also found its use in forest mapping over the last decade. In most cases, existing methods for forest data acquisition using MLS result in misaligned scenes of the forest, scanned from different views appearing in one point cloud. These difficulties are caused mainly by forest canopy blocking the global navigation satellite system (GNSS) signal and limited access to the forest. In this study, we propose an approach to the processing of MLS data of forest scanned from different views with two mobile laser scanners under heavy canopy. Data from two scanners, as part of the mobile mapping system (MMS) Riegl VMX-250, were acquired by scanning from five parallel skid trails that are connected to the forest road. Misaligned scenes of the forest acquired from different views were successfully extracted from the raw MLS point cloud using GNSS time based clustering. At first, point clouds with correctly aligned sets of ground points were generated using this method. The loss of points after the clustering amounted to 33.48%. Extracted point clouds were then reduced to 1.15 m thick horizontal slices, and tree stems were detected. Point clusters from individual stems were grouped based on the diameter and mean GNSS time of the cluster acquisition. Horizontal overlap was calculated for the clusters from individual stems, and sufficiently overlapping clusters were aligned using the OPALS ICP module. An average misalignment of 7.2 mm was observed for the aligned point clusters. A 5-cm thick horizontal slice of the aligned point cloud was used for estimation of the stem diameter at breast height (DBH). DBH was estimated using a simple circle-fitting method with a root-mean-square error of 3.06 cm. The methods presented in this study have the potential to process MLS data acquired under heavy forest canopy with any commercial MMS.

scholarly journals HEIGHT DETERMINATION TECHNIQUES FOR THE NEXT NATIONAL HEIGHT SYSTEM OF FINLAND - A CASE STUDY

2015 ◽  
Vol 41 (4) ◽  
pp. 145-155
Author(s):  
Timo Saari ◽  
Markku Poutanen ◽  
Veikko Saaranen ◽  
Harri Kaartinen ◽  
Antero Kukko ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Pilot Project ◽  
Satellite System ◽  
Reference Station ◽  
Virtual Reference ◽  
Precise Levelling ◽  
Height Determination ◽  
Weak Points ◽  
Global Navigation Satellite

Precise levelling is known for its accuracy and reliability in height determination, but the process itself is slow, laborious and expensive. We have started a project to study methods for height determination that could decrease the creation time of national height systems without losing the accuracy and reliability that is needed for them. In the pilot project described here, we study some of the alternative techniques with a pilot field test where we compared them with the precise levelling. The purpose of the test is not to evaluate the mutual superiority or suitability of the techniques, but to establish the background for a larger test and to find strong and weak points of each technique. The techniques chosen for this study were precise levelling, Mobile Laser Scanning (MLS) and Global Navigation Satellite System (GNSS) levelling, which included static Global Positioning System (GPS) and Virtual Reference Station (VRS) measurements. This research highlighted the differences of the studied techniques and gave insights about the framework and procedure for the later experiments. The research will continue in a larger scale, where the suitability of the techniques regarding the height systems is to be determined.

scholarly journals Space-Time-Frequency Adaptive Processor for Multiple Interference Suppression in GNSS Applications

2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Qiang Guo ◽  
Lian-gang Qi ◽  
Jianhong Xiang
Keyword(s):  
Interference Suppression ◽  
Satellite System ◽  
Space Time ◽  
Similar Frequency ◽  
Time Frequency ◽  
Weight Calculation ◽  
Global Navigation Satellite ◽  
Short Time ◽  
Multiple Interference ◽  
Adaptive Processor

To enhance the multiple interference suppression performance of global navigation satellite system (GNSS) receivers without extra antenna elements, a space-time-frequency adaptive processor (STFAP) is investigated. Firstly, based on the analysis of the autocorrelation function of the multicomponent signal, we propose a common period estimation and data block technique to segment the received signal data into blocks. Secondly, the signal data in each block are short-time Fourier transformed into time-frequency (TF) domain, and the corresponding TF points with similar frequency characteristics are regrouped to structure space-time-frequency (STF) data matrixes. Finally, a space-time-frequency minimum output power- (STF-MOP) based weight calculation method is introduced to suppress multiple interfering signals according to their sparse characteristics in TF and space domains. Simulation results show that the proposed STFAP can effectively combat more wideband periodic frequency-modulated (WBPFM) interferences even some of them arriving from the same direction as GNSS signals without increasing the number of antenna elements.

scholarly journals Comparison of Modeling Algorithms for Forest Canopy Structures Based on UAV-LiDAR: A Case Study in Tropical China

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1324
Author(s):  
Xi Peng ◽  
Anjiu Zhao ◽  
Yongfu Chen ◽  
Qiao Chen ◽  
Haodong Liu ◽  
...  
Keyword(s):  
Tropical Forests ◽  
Laser Scanning ◽  
Forest Canopy ◽  
Sustainable Forest Management ◽  
Mean Squared Error ◽  
Structural Parameters ◽  
Recursive Feature Elimination ◽  
Support Vector ◽  
Lidar Data ◽  
Area Index

Knowledge of forest structure is vital for sustainable forest management decisions. Terrestrial laser scanning cannot describe the canopy trees in a large area, and it is unclear whether unmanned aerial vehicle-light detection and ranging (UAV-LiDAR) data have the ability to capture the forest canopy structural parameters in tropical forests. In this study, we estimated five forest canopy structures (stand density (N), basic area (G), above-ground biomass (AGB), Lorey’s mean height (HL), and under-crown height (hT)) with four modeling algorithms (linear regression (LR), bagged tree (BT), support vector regression (SVR), and random forest (RF)) based on UAV-LiDAR data and 60 sample plot data from tropical forests in Hainan and determined the optimal algorithms for the five canopy structures by comparing the performance of the four algorithms. First, we defined the canopy tree as a tree with a height ≥70% HL. Then, UAV-LiDAR metrics were calculated, and the LiDAR metrics were screened by recursive feature elimination (RFE). Finally, a prediction model of the five forest canopy structural parameters was established by the four algorithms, and the results were compared. The metrics’ screening results show that the most important LiDAR indexes for estimating HL, AGB, and hT are the leaf area index and some height metrics, while the most important indexes for estimating N and G are the kurtosis of heights and the coefficient of variation of height. The relative root mean squared error (rRMSE) of five structure parameters showed the following: when modeling HL, the rRMSEs (10.60%–12.05%) obtained by the four algorithms showed little difference; when N was modeled, BT, RF, and SVR had lower rRMSEs (26.76%–27.44%); when G was modeled, the rRMSEs of RF and SVR (15.37%–15.87%) were lower; when hT was modeled, BT, RF, and SVR had lower rRMSEs (10.24%–11.07%); when AGB was modeled, RF had the lowest rRMSE (26.75%). Our results will help facilitate choosing LiDAR indexes and modeling algorithms for tropical forest resource inventories.

scholarly journals Brief communication "Application of mobile laser scanning in snow cover profiling"

2011 ◽  
Vol 5 (1) ◽  
pp. 135-138 ◽  
Author(s):  
S. Kaasalainen ◽  
H. Kaartinen ◽  
A. Kukko ◽  
K. Anttila ◽  
A. Krooks
Keyword(s):  
Change Detection ◽  
Snow Cover ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Terrestrial Laser Scanner ◽  
Mobile Mapping ◽  
Preliminary Results ◽  
Geodetic Institute ◽  
Mapping System ◽  
Mobile Mapping System

Abstract. We present a snowmobile-based mobile mapping system and its first application to snow cover roughness and change detection measurement. The ROAMER mobile mapping system, constructed at the Finnish Geodetic Institute, consists of the positioning and navigating systems, a terrestrial laser scanner, and the carrying platform (a snowmobile sledge in this application). We demonstrate the applicability of the instrument to snow cover roughness profiling and change detection by presenting preliminary results from a mobile laser scanning (MLS) campaign. The results show the potential of MLS for fast and efficient snow profiling from large areas in a millimetre scale.

scholarly journals UNMANNED AERIAL VEHICLE LASER SCANNING FOR EROSION MONITORING IN ALPINE GRASSLAND

2019 ◽  
Vol IV-2/W5 ◽  
pp. 405-412 ◽  
Author(s):  
A. Mayr ◽  
M. Bremer ◽  
M. Rutzinger ◽  
C. Geitner
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Point Cloud ◽  
Laser Scanning ◽  
Test Site ◽  
Satellite System ◽  
Alpine Grassland ◽  
Proof Of Concept ◽  
Aerial Vehicle ◽  
Geomorphological Changes ◽  
Global Navigation Satellite

<p><strong>Abstract.</strong> With this contribution we assess the potential of unmanned aerial vehicle (UAV) based laser scanning for monitoring shallow erosion in Alpine grassland. A 3D point cloud has been acquired by unmanned aerial vehicle laser scanning (ULS) at a test site in the subalpine/alpine elevation zone of the Dolomites (South Tyrol, Italy). To assess its accuracy, this point cloud is compared with (i) differential global navigation satellite system (GNSS) reference measurements and (ii) a terrestrial laser scanning (TLS) point cloud. The ULS point cloud and an airborne laser scanning (ALS) point cloud are rasterized into digital surface models (DSMs) and, as a proof-of-concept for erosion quantification, we calculate the elevation difference between the ULS DSM from 2018 and the ALS DSM from 2010. For contiguous spatial objects of elevation change, the volumetric difference is calculated and a land cover class (<i>bare earth</i>, <i>grassland</i>, <i>trees</i>), derived from the ULS reflectance and RGB colour, is assigned to each change object. In this test, the accuracy and density of the ALS point cloud is mainly limiting the detection of geomorphological changes. Nevertheless, the plausibility of the results is confirmed by geomorphological interpretation and documentation in the field. A total eroded volume of 672&amp;thinsp;m<sup>3</sup> is estimated for the test site (48&amp;thinsp;ha). Such volumetric estimates of erosion over multiple years are a key information for improving sustainable soil management. Based on this proof-of-concept and the accuracy analysis, we conclude that repeated ULS campaigns are a well-suited tool for erosion monitoring in Alpine grassland.</p>

scholarly journals Spatially continuous mapping of snow depth in high alpine catchments using digital photogrammetry

2014 ◽  
Vol 8 (3) ◽  
pp. 3297-3333 ◽  
Author(s):  
Y. Bühler ◽  
M. Marty ◽  
L. Egli ◽  
J. Veitinger ◽  
T. Jonas ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Snow Depth ◽  
Laser Scanning ◽  
Continuous Mapping ◽  
Satellite System ◽  
Image Correlation ◽  
Sensor Data ◽  
Optical Scanners ◽  
Alpine Catchments ◽  
Global Navigation Satellite

Abstract. Information on snow depth and its spatial distribution is crucial for many applications in snow and avalanche research as well as in hydrology and ecology. Today snow depth distributions are usually estimated using point measurements performed by automated weather stations and observers in the field combined with interpolation algorithms. However, these methodologies are not able to capture the high spatial variability of the snow depth distribution present in alpine terrain. Continuous and accurate snow depth mapping has been done using laser scanning but this method can only cover limited areas and is expensive. We use the airborne ADS80 opto-electronic scanner with 0.25 m spatial resolution to derive digital surface models (DSMs) of winter and summer terrains in the neighborhood of Davos, Switzerland. The DSMs are generated using photogrammetric image correlation techniques based on the multispectral nadir and backward looking sensor data. We compare these products with the following independent datasets acquired simultaneously: (a) manually measured snow depth plots (b) differential Global Navigation Satellite System (dGNSS) points (c) Terrestrial Laser Scanning (TLS) and (d) Ground Penetrating Radar (GPR) datasets, to assess the accuracy of the photogrammetric products. The results of this investigation demonstrate the potential of optical scanners for wide-area, continuous and high spatial resolution snow-depth mapping over alpine catchments above tree line.

scholarly journals MOVING OBJECT CLASSIFICATION USING MULTILAYER LASER SCANNING WITH SPACE SUBDIVISION FRAMEWORK

2020 ◽  
Vol V-4-2020 ◽  
pp. 103-108
Author(s):  
M. Nakagawa ◽  
M. Taguchi
Keyword(s):  
Real Time ◽  
Urban Areas ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Object Classification ◽  
Point Clouds ◽  
Satellite System ◽  
Space Subdivision ◽  
Position Data ◽  
Global Navigation Satellite

Abstract. In this paper, we focus on the development of intelligent construction vehicles to improve the safety of workers in construction sites. Generally, global navigation satellite system positioning is utilized to obtain the position data of workers and construction vehicles. However, construction fields in urban areas have poor satellite positioning environments. Therefore, we have developed a 3D sensing unit mounted on a construction vehicle for worker position data acquisition. The unit mainly consists of a multilayer laser scanner. We propose a real-time object measurement, classification and tracking methodology with the multilayer laser scanner. We also propose a methodology to estimate and visualize object behaviors with a spatial model based on a space subdivision framework consisting of agents, activities, resources, and modifiers. We applied the space subdivision framework with a geofencing approach using real-time object classification and tracking results estimated from temporal point clouds. Our methodology was evaluated using temporal point clouds acquired from a construction vehicle in drilling works.

scholarly journals INVESTIGATING THE PERFORMANCE OF A HANDHELD MOBILE MAPPING SYSTEM IN DIFFERENT OUTDOOR SCENARIOS

2021 ◽  
Vol XLIII-B1-2021 ◽  
pp. 103-109
Author(s):  
E. Maset ◽  
S. Cucchiaro ◽  
F. Cazorzi ◽  
F. Crosilla ◽  
A. Fusiello ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Qualitative Assessment ◽  
Case Scenario ◽  
Mobile Mapping ◽  
Mapping System ◽  
Mobile Mapping System ◽  
Survey Instruments ◽  
Large Building

Abstract. In recent years, portable Mobile Mapping Systems (MMSs) are emerging as valuable survey instruments for fast and efficient mapping of both internal and external environments. The aim of this work is to assess the performance of a commercial handheld MMS, Gexcel HERON Lite, in two different outdoor applications. The first is the mapping of a large building, which represents a standard use-case scenario of this technology. Through the second case study, that consists in the survey of a torrent reach, we investigate instead the applicability of the handheld MMS for natural environment monitoring, a field in which portable systems are not yet widely employed. Quantitative and qualitative assessment is presented, comparing the point clouds obtained from the HERON Lite system against reference models provided by traditional techniques (i.e., Terrestrial Laser Scanning and Photogrammetry).

scholarly journals GEOMATIC METHODS APPLIED TO THE CHANGE STUDY OF THE LA PAÚL ROCK GLACIER, SPANISH PYRENEES

2019 ◽  
Vol XLII-2/W13 ◽  
pp. 1771-1775
Author(s):  
A. Martínez-Fernández ◽  
E. Serrano ◽  
J. J. Sanjosé ◽  
M. Gómez-Lende ◽  
A. Pisabarro ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Satellite System ◽  
Ice Age ◽  
Rock Glacier ◽  
Glacier Surface ◽  
The North ◽  
Spanish Pyrenees ◽  
Gnss Receivers ◽  
Rock Glaciers ◽  
Global Navigation Satellite

<p><strong>Abstract.</strong> Rock glaciers are one of the most important features of the mountain permafrost in the Pyrenees. La Paúl is an active rock glacier located in the north face of the Posets massif in the La Paúl glacier cirque (Spanish Pyrenees). This study presents the preliminary results of the La Paúl rock glacier monitoring works carried out through two geomatic technologies since 2013: Global Navigation Satellite System (GNSS) receivers and Terrestrial Laser Scanning (TLS) devices. Displacements measured on the rock glacier surface have demonstrated both the activity of the rock glacier and the utility of this equipment for the rock glaciers dynamic analysis. The glacier has exhibited the fastest displacements on its west side (over 35&amp;thinsp;cm&amp;thinsp;yr<sup>&amp;minus;1</sup>), affected by the Little Ice Age, and frontal area (over 25&amp;thinsp;cm&amp;thinsp;yr<sup>&amp;minus;1</sup>). As an indicator of permafrost in marginal environments and its peculiar morphology, La Paúl rock glacier encourages a more prolonged study and to the application of more geomatic techniques for its detailed analysis.</p>

Sign in / Sign up

Export Citation Format

Share Document