High Throughput RNA Extraction and PCR Inhibitor Removal of Settled Solids for Wastewater Surveillance of SARS-CoV-2 RNA v1 (protocols.io.btyrnpv6)

protocols.io ◽  
2021 ◽  
Author(s):  
Aaron Topol ◽  
marlene.wolfe not provided ◽  
Krista Wigginton ◽  
Bradley White ◽  
Alexandria B
Keyword(s):  
High Throughput ◽  
Rna Extraction ◽  
Pcr Inhibitor

High Throughput RNA Extraction and PCR Inhibitor Removal of Settled Solids for Wastewater Surveillance of SARS-CoV-2 RNA v2

2021 ◽  
Author(s):  
Aaron Topol ◽  
marlene.wolfe not provided ◽  
Krista Wigginton ◽  
Bradley White ◽  
Alexandria B Boehm
Keyword(s):  
Nucleic Acids ◽  
High Throughput ◽  
Magnetic Beads ◽  
Rna Extraction ◽  
Poly Vinyl Alcohol ◽  
Enzymatic Reactions ◽  
Efficient Removal ◽  
Dna And Rna ◽  
Pcr Inhibitor ◽  
Wastewater Samples

Please note that while this protocol is for TNA extraction using the Perkin Elmer Chemagic 360, RNA extraction with resuspended solids from this protocol has been verified to perform well using the Kingfisher MagMax kit as another high throughput, automated option and two manual Qiagen kits - the All Prep Powerviral DNA/RNA Kit and the Qiamp Viral RNA Mini Kit. This process instruction describes the steps for purification of nucleic acids from wastewater solids and preparation for downstream quantitative analysis with Reverse Transcriptase droplet digital Polymerase Chain Reaction (RT-ddPCR). Due to the large quantities of substances that have inhibitory effects on PCR in wastewater samples, a subsequent PCR inhibitor removal step is required after nucleic acid purification. Both steps of the process are carried out in a 96-well plate format. This method uses the resuspended solids generated using this protocol: High Throughput pre-analytical processing of wastewater settled solids for SARS-CoV-2 RNA analyses. RNA purification is carried out using a kit optimized for the purification of viral on for the Perkin Elmer Chemagic 360. Although only RNA is used in the downstream applications from this protocol, DNA is also eluted in this process. A crucial component of the purification kit are the magnetic particles coated with poly vinyl alcohol (M-PVA Magnetic Beads) which have a hydrophilic surface giving them an affinity for nucleic acids but not many other biological molecules. The workflow involves binding nucleic acids in a sample to the beads which are then transferred through a series of wash buffers to remove debris with a robotic head with magnetic rods. The OneStep PCR Inhibitor Removal Kits are PCR inhibitor clean up kits that contain all the components needed for efficient removal of contaminants that can inhibit downstream enzymatic reactions (e.g. PCR and RT) from DNA and RNA preparations. The column matrices in these PCR inhibitor clean up kits have been specifically designed for the efficient removal of polyphenolic compounds, humic/fulvic acids, tannins, melanin, etc. from the most impure DNA and RNA preparations. This process instruction applies to extraction of RNA from wastewater samples using the Chemagic™ Viral DNA/RNA 300 Kit H96 for the Perkin Elmer Chemagic 360 followed by PCR Inhibitor Removal with the Zymo OneStep-96 PCR Inhibitor Removal Kit.

Quantification of SARS-CoV-2 variant mutations (HV69-70, E484K/N501Y, and del156-157/R158G) in settled solids using digital RT-PCR v2

2021 ◽  
Author(s):  
Bridgette Hughes ◽  
Bradley J. White ◽  
Marlene K. Wolfe ◽  
Krista Wigginton ◽  
Alexandria B Boehm
Keyword(s):  
Quantitative Analysis ◽  
Nucleic Acid ◽  
High Throughput ◽  
Rna Extraction ◽  
Population Level ◽  
Digital Pcr ◽  
N Gene ◽  
Rt Pcr ◽  
Pcr Inhibitor ◽  
Wastewater Samples

This process instruction describes the steps for quantitative analysis of nucleic acid from SARS-CoV-2 with a triplex Reverse Transcriptase droplet digital Polymerase Chain Reaction (RT-ddPCR) assay targeting the N Gene, S Gene and 3 mutation assays (one for HV69-70, one for E484K/N501Y, and one for del156-157/R158G) in extracted and purified RNA samples from solid wastewater samples for population level SARS-CoV-2 community surveillance. RT-ddPCR is a modified version of conventional RT-PCR workflows which involves separating the reaction mixture into many partitions (~20,000) before thermal cycling which allows for direct absolute quantification of the target RNA molecules. Future protocols will be published that are complementary to this one and describe assays targeting additional SARS-CoV-2 mutations. This protocol uses RNA extracted using this protocol: High Throughput RNA Extraction and PCR Inhibitor Removal of Settled Solids for Wastewater Surveillance of SARS-CoV-2 RNA. That RNA is generated from samples subjected to pre-analytical steps outlined in: High Throughput pre-analytical processing of wastewater settled solids for SARS-CoV-2 RNA analyses. It is recommended that these assays be run along assays for PMMoV and BCoV as controls as described in the companion protocol High Throughput SARS-COV-2, PMMOV, and BCoV quantification in settled solids using digital RT-PCR The readout of this assay is a concentration of each target in the extracted RNA samples (copies/µL). Scope This process instruction applies to quantitative analysis of nucleic acid from SARS-CoV-2 RNA from solid wastewater samples with ddPCR using a Bio-Rad AutoDG Droplet Digital PCR system consisting of the AutoDG Automated Droplet Generator and the QX200 droplet reader.

Quantification of SARS-CoV-2 variant mutations (HV69-70, E484K/N501Y,del156-157/R158G, and Del143-145) in settled solids using digital RT-PCR v2

2021 ◽  
Author(s):  
Bridgette Hughes ◽  
Bradley J. White ◽  
Marlene K. Wolfe ◽  
Krista Wigginton ◽  
Alexandria B Boehm
Keyword(s):  
Quantitative Analysis ◽  
Nucleic Acid ◽  
High Throughput ◽  
Rna Extraction ◽  
Population Level ◽  
Digital Pcr ◽  
N Gene ◽  
Rt Pcr ◽  
Pcr Inhibitor ◽  
Wastewater Samples

This process instruction describes the steps for quantitative analysis of nucleic acid from SARS-CoV-2 with a triplex Reverse Transcriptase droplet digital Polymerase Chain Reaction (RT-ddPCR) assay targeting the N Gene, S Gene and 3 mutation assays (one each for HV69-70, E484K/N501Y, del156-157/R158G, and Del143-145) in extracted and purified RNA samples from solid wastewater samples for population level SARS-CoV-2 community surveillance. RT-ddPCR is a modified version of conventional RT-PCR workflows which involves separating the reaction mixture into many partitions (~20,000) before thermal cycling which allows for direct absolute quantification of the target RNA molecules. Future protocols will be published that are complementary to this one and describe assays targeting additional SARS-CoV-2 mutations. This protocol uses RNA extracted using this protocol: High Throughput RNA Extraction and PCR Inhibitor Removal of Settled Solids for Wastewater Surveillance of SARS-CoV-2 RNA. That RNA is generated from samples subjected to pre-analytical steps outlined in: High Throughput pre-analytical processing of wastewater settled solids for SARS-CoV-2 RNA analyses. It is recommended that these assays be run along assays for PMMoV and BCoV as controls as described in the companion protocol High Throughput SARS-COV-2, PMMOV, and BCoV quantification in settled solids using digital RT-PCR The readout of this assay is a concentration of each target in the extracted RNA samples (copies/µL). Scope This process instruction applies to quantitative analysis of nucleic acid from SARS-CoV-2 RNA from solid wastewater samples with ddPCR using a Bio-Rad AutoDG Droplet Digital PCR system consisting of the AutoDG Automated Droplet Generator and the QX200 droplet reader.

High Throughput SARS-COV-2, PMMOV, and BCoV quantification in settled solids using digital RT-PCR v2

2021 ◽  
Author(s):  
Aaron Topol (Verily Life Sciences) ◽  
marlene.wolfe not provided ◽  
Brad White (Verily Life Sciences) ◽  
Krista Wigginton ◽  
Alexandria B Boehm
Keyword(s):  
Quantitative Analysis ◽  
Nucleic Acid ◽  
High Throughput ◽  
Rna Extraction ◽  
Digital Pcr ◽  
N Gene ◽  
Acid Extraction ◽  
Rt Pcr ◽  
Pcr Inhibitor ◽  
Wastewater Samples

This process instruction describes the steps for quantitative analysis of nucleic acid from SARS-CoV-2 with a triplex Reverse Transcriptase droplet digital Polymerase Chain Reaction (RT-ddPCR) assay targeting the N Gene, S Gene and ORF1a and a duplex assay targeting Bovine Coronavirus Vaccine (BCoV) and Pepper Mild mottle virus (PMMoV) in extracted and purified RNA samples from solid wastewater samples for population level SARS-CoV-2 community surveillance. RT-ddPCR is a modified version of conventional RT-PCR workflows which involves separating the reaction mixture into many partitions (~20,000) before thermal cycling which allows for direct absolute quantification of the target RNA molecules. This protocol uses RNA extracted using this protocol: High Throughput RNA Extraction and PCR Inhibitor Removal of Settled Solids for Wastewater Surveillance of SARS-CoV-2 RNA. That RNA is generated from samples subjected to pre-analytical steps outlined in: High Throughput pre-analytical processing of wastewater settled solids for SARS-CoV-2 RNA analyses. This protocol describes 2 separate PCR reactions, one containing primer/probe mixtures targeting the three SARS-CoV-2 targets and one containing primer/probe mixtures targeting BCoV and PMMoV. BCoV is spiked into samples before nucleic acid extraction and serves as a process control as well as an indicator of PCR inhibition. PMMoV is an enveloped virus which is abundant in human fecal waste and serves as an endogenous control for data normalization. PMMoV RNA is abundant at such high levels in wastewater samples that the samples must be diluted by a factor of 100 before quantification. The readout of this assay is a concentration of each target in the extracted RNA samples (copies/uL). Scope This process instruction applies to quantitative analysis of nucleic acid from SARS-CoV-2 RNA from solid wastewater samples with ddPCR using a Bio-Rad AutoDG Droplet Digital PCR system consisting of the AutoDG Automated Droplet Generator and the QX200 droplet reader.

scholarly journals Evaluation of an Automated High-Throughput Liquid-Based RNA Extraction Platform on Pooled Nasopharyngeal or Saliva Specimens for SARS-CoV-2 RT-PCR

Viruses ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 615
Author(s):  
Allen Wing-Ho Chu ◽  
Cyril Chik-Yan Yip ◽  
Wan-Mui Chan ◽  
Anthony Chin-Ki Ng ◽  
Dream Lok-Sze Chan ◽  
...  
Keyword(s):  
Nucleic Acid ◽  
High Throughput ◽  
Rna Extraction ◽  
Nasopharyngeal Swab ◽  
Acid Extraction ◽  
Rt Pcr ◽  
Nucleic Acid Extraction ◽  
Suitable Alternative ◽  
Pcr Inhibitors ◽  
Pcr Targeting

SARS-CoV-2 RT-PCR with pooled specimens has been implemented during the COVID-19 pandemic as a cost- and manpower-saving strategy for large-scale testing. However, there is a paucity of data on the efficiency of different nucleic acid extraction platforms on pooled specimens. This study compared a novel automated high-throughput liquid-based RNA extraction (LRE) platform (PHASIFYTM) with a widely used magnetic bead-based total nucleic acid extraction (MBTE) platform (NucliSENS® easyMAG®). A total of 60 pools of nasopharyngeal swab and 60 pools of posterior oropharyngeal saliva specimens, each consisting of 1 SARS-CoV-2 positive and 9 SARS-CoV-2 negative specimens, were included for the comparison. Real-time RT-PCR targeting the SARS-CoV-2 RdRp/Hel gene was performed, and GAPDH RT-PCR was used to detect RT-PCR inhibitors. No significant differences were observed in the Ct values and overall RT-PCR positive rates between LRE and MBTE platforms (92.5% (111/120] vs 90% (108/120]), but there was a slightly higher positive rate for LRE (88.3% (53/60]) than MBTE (81.7% (49/60]) among pooled saliva. The automated LRE method is comparable to a standard MBTE method for the detection of SAR-CoV-2 in pooled specimens, providing a suitable alternative automated extraction platform. Furthermore, LRE may be better suited for pooled saliva specimens due to more efficient removal of RT-PCR inhibitors.

scholarly journals Towards the validation of high-throughput sequencing (HTS) for routine plant virus diagnostics: measurement of variation linked to HTS detection of citrus viruses and viroids

2021 ◽  
Vol 18 (1) ◽  
Author(s):  
Rachelle Bester ◽  
Glynnis Cook ◽  
Johannes H. J. Breytenbach ◽  
Chanel Steyn ◽  
Rochelle De Bruyn ◽  
...  
Keyword(s):  
High Throughput ◽  
Extraction Method ◽  
Pathogen Detection ◽  
High Throughput Sequencing ◽  
Expression Profiles ◽  
Rna Extraction ◽  
Healthy Plant ◽  
Ion Torrent ◽  
Extraction Protocol ◽  
Zymo Research

Abstract Background High-throughput sequencing (HTS) has been applied successfully for virus and viroid discovery in many agricultural crops leading to the current drive to apply this technology in routine pathogen detection. The validation of HTS-based pathogen detection is therefore paramount. Methods Plant infections were established by graft inoculating a suite of viruses and viroids from established sources for further study. Four plants (one healthy plant and three infected) were sampled in triplicate and total RNA was extracted using two different methods (CTAB extraction protocol and the Zymo Research Quick-RNA Plant Miniprep Kit) and sent for Illumina HTS. One replicate sample of each plant for each RNA extraction method was also sent for HTS on an Ion Torrent platform. The data were evaluated for biological and technical variation focussing on RNA extraction method, platform used and bioinformatic analysis. Results The study evaluated the influence of different HTS protocols on the sensitivity, specificity and repeatability of HTS as a detection tool. Both extraction methods and sequencing platforms resulted in significant differences between the data sets. Using a de novo assembly approach, complemented with read mapping, the Illumina data allowed a greater proportion of the expected pathogen scaffolds to be inferred, and an accurate virome profile was constructed. The complete virome profile was also constructed using the Ion Torrent data but analyses showed that more sequencing depth is required to be comparative to the Illumina protocol and produce consistent results. The CTAB extraction protocol lowered the proportion of viroid sequences recovered with HTS, and the Zymo Research kit resulted in more variation in the read counts obtained per pathogen sequence. The expression profiles of reference genes were also investigated to assess the suitability of these genes as internal controls to allow for the comparison between samples across different protocols. Conclusions This study highlights the need to measure the level of variation that can arise from the different variables of an HTS protocol, from sample preparation to data analysis. HTS is more comprehensive than any assay previously used, but with the necessary validations and standard operating procedures, the implementation of HTS as part of routine pathogen screening practices is possible.

scholarly journals A comprehensive RNA handling and transcriptomics guide for high-throughput processing of Plasmodium blood-stage samples

2020 ◽  
Vol 19 (1) ◽  
Author(s):  
Michal Kucharski ◽  
Jaishree Tripathi ◽  
Sourav Nayak ◽  
Lei Zhu ◽  
Grennady Wirjanata ◽  
...  
Keyword(s):  
High Throughput ◽  
Large Scale ◽  
Rna Extraction ◽  
Transcriptome Data ◽  
High Quality ◽  
Diverse Range ◽  
Human Haemoglobin ◽  
Infected Blood ◽  
Blood Samples ◽  
Total Rna

Abstract Background Sequencing technology advancements opened new opportunities to use transcriptomics for studying malaria pathology and epidemiology. Even though in recent years the study of whole parasite transcriptome proved to be essential in understanding parasite biology there is no compiled up-to-date reference protocol for the efficient generation of transcriptome data from growing number of samples. Here, a comprehensive methodology on how to preserve, extract, amplify, and sequence full-length mRNA transcripts from Plasmodium-infected blood samples is presented that can be fully streamlined for high-throughput studies. Results The utility of various commercially available RNA-preserving reagents in a range of storage conditions was evaluated. Similarly, several RNA extraction protocols were compared and the one most suitable method for the extraction of high-quality total RNA from low-parasitaemia and low-volume blood samples was established. Furthermore, the criteria needed to evaluate the quality and integrity of Plasmodium RNA in the presence of human RNA was updated. Optimization of SMART-seq2 amplification method to better suit AT-rich Plasmodium falciparum RNA samples allowed us to generate high-quality transcriptomes from as little as 10 ng of total RNA and a lower parasitaemia limit of 0.05%. Finally, a modified method for depletion of unwanted human haemoglobin transcripts using in vitro CRISPR-Cas9 treatment was designed, thus improving parasite transcriptome coverage in low parasitaemia samples. To prove the functionality of the pipeline for both laboratory and field strains, the highest  2-hour resolution RNA-seq transcriptome for P. falciparum 3D7 intraerythrocytic life cycle available to  date was generated, and the entire protocol was applied to create the largest transcriptome data from Southeast Asian field isolates. Conclusions Overall, the presented methodology is an inclusive pipeline for generation of good quality transcriptomic data from a diverse range of Plasmodium-infected blood samples with varying parasitaemia and RNA inputs. The flexibility of this pipeline to be adapted to robotic handling will facilitate both small and large-scale future transcriptomic studies in the field of malaria.

Manual Silane magnetic bead-based high throughput protocol for SARS-CoV-2 RNA extraction v1 (protocols.io.be8bjhsn)

protocols.io ◽  
2020 ◽  
Author(s):  
Ainhoa Go ◽  
Jose Antonio ◽  
Nicholas Weber ◽  
Juan Pablo ◽  
Josepmaria Argemi ◽  
...  
Keyword(s):  
High Throughput ◽  
Rna Extraction ◽  
Magnetic Bead

scholarly journals Evaluation of direct metagenomics and target enriched approaches for high-throughput sequencing of field rabies viruses

2019 ◽  
Vol 63 (4) ◽  
pp. 471-479
Author(s):  
Anna Orłowska ◽  
Ewelina Iwan ◽  
Marcin Smreczak ◽  
Jerzy Rola
Keyword(s):  
High Throughput ◽  
Deep Sequencing ◽  
High Throughput Sequencing ◽  
De Novo ◽  
High Reliability ◽  
Rna Extraction ◽  
Genetic Material ◽  
Target Enrichment ◽  
Red Foxes ◽  
Field Samples

AbstractIntroductionHigh-throughput sequencing (HTS) identifies random viral fragments in environmental samples metagenomically. High reliability gains it broad application in virus evolution, host-virus interaction, and pathogenicity studies. Deep sequencing of field samples with content of host genetic material and bacteria often produces insufficient data for metagenomics and must be preceded by target enrichment. The main goal of the study was the evaluation of HTS for complete genome sequencing of field-case rabies viruses (RABVs).Material and MethodsThe material was 23 RABVs isolated mainly from red foxes and one European bat lyssavirus-1 isolate propagated in neuroblastoma cells. Three methods of RNA isolation were tested for the direct metagenomics and RABV-enriched approaches. Deep sequencing was performed with a MiSeq sequencer (Illumina) and reagent v3 kit. Bioinformatics data were evaluated by Kraken and Centrifuge software and de novo assembly was done with metaSPAdes.ResultsTesting RNA extraction procedures revealed the deep sequencing scope superiority of the combined TRIzol/column method. This HTS methodology made it possible to obtain complete genomes of all the RABV isolates collected in the field. Significantly greater rates of RABV genome coverages (over 5,900) were obtained with RABV enrichment. Direct metagenomic studies sequenced the full length of 6 out of 16 RABV isolates with a medium coverage between 1 and 71.ConclusionDirect metagenomics gives the most realistic illustration of the field sample microbiome, but with low coverage. For deep characterisation of viruses, e.g. for spatial and temporal phylogeography during outbreaks, target enrichment is recommended as it covers sequences much more completely.

scholarly journals A High-Throughput RNA Extraction for Sprouted Single-Seed Barley (Hordeum vulgare L.) Rich in Polysaccharides

Plants ◽  
2016 ◽  
Vol 6 (4) ◽  
pp. 1 ◽  
Author(s):  
Abdur Rashid ◽  
Thomas Baldwin ◽  
Michael Gines ◽  
Phil Bregitzer ◽  
Kathy Esvelt Klos
Keyword(s):  
Hordeum Vulgare ◽  
High Throughput ◽  
Rna Extraction ◽  
Hordeum Vulgare L ◽  
Single Seed
Sign in / Sign up

Export Citation Format

Share Document