Evaluation of Image Uniformity and Radiolucency for Computed Tomography Phantom Made of 3-Dimensional Printing of Fused Deposition Modeling Technology by Using Acrylonitrile Butadiene Styrene Resin

2016 ◽  
Vol 39 (3) ◽  
pp. 337-344
Author(s):  
Youl-Hun Seoung ◽  
Keyword(s):  
Computed Tomography ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
3 Dimensional ◽  
Modeling Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Dimensional Printing ◽  
Butadiene Styrene

scholarly journals Fused Deposition Modeling Technology to Redesign a Nylon Component

2017 ◽  
Vol 54 (1) ◽  
pp. 168-171 ◽  
Author(s):  
Nicoleta Elisabeta Pascu ◽  
Tiberiu Dobrescu ◽  
Adrian Popescu ◽  
Victor Gabriel Adir
Keyword(s):  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Road Vehicles ◽  
Constructive Solution ◽  
Average Complexity ◽  
Modeling Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Plastic Parts ◽  
Butadiene Styrene

3D printing by means of the Fused Deposition Modeling technology allows to obtain accurately and with very good results, plastic parts with various, simple or complex typo-dimensions and forms. The part in this article is from the field of road vehicles, it is called fixing clamp and it is of average complexity of the hole strip type with two protuberances necessary to ensure the purpose for which they provided. The necessity of making the part through addition appeared because it is not the market and because it was not provided by the supplier [1]. The constructive solution offered by the producer is a very good and necessary one, in the same time for the user in the equipment in which it is included (fig. 10). The constructive solution proposed in this article resulted from tests on some parts of Acrylonitrile-Butadiene-Styrene and Nylon and the results were conclusive for choosing and adopting the Nylon variant.

Investigation of Recycled Acrylonitrile Butadiene Styrene for Additive Manufacturing

2020 ◽  
pp. 130-154
Author(s):  
Shajahan Bin Maidin ◽  
Zulkeflee Abdullah ◽  
Ting Kung Hieng
Keyword(s):  
Mechanical Properties ◽  
Test Specimen ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Travel Speed ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

One of the disadvantages of fused deposition modeling (FDM) is waste produced during the printing processes. This investigation focuses on using 100% recycled Acrylonitrile Butadiene Styrene (ABS) for the FDM process. The recycling begins with re-granule the waste ABS material and produces it into a new filament. The new recycled filament was used to print the test specimen. Investigation on the mechanical properties and the surface quality of the test specimen and comparison with standard ABS specimen was done. The result shows that the recycled ABS can be produced into filament with 335°C of extrusion temperature and 1.5 mm/s travel speed of the extruder conveyor. The surface roughness of recycled specimen is 6.94% higher than the standard ABS specimen. For ultimate tensile strength, there is a small difference in X and Y orientation between the standard and the recycled ABS specimen which are 22.93% and 19.98%, respectively. However, in Z orientation, it is 52.33% lower. This investigation proves that ABS can be recycled without significantly affecting its mechanical properties.

Fractographic analysis of tensile failure of acrylonitrile-butadiene-styrene fabricated by fused deposition modeling

2016 ◽  
Vol 11 ◽  
pp. 49-59 ◽  
Author(s):  
Jaret C. Riddick ◽  
Mulugeta A. Haile ◽  
Ray Von Wahlde ◽  
Daniel P. Cole ◽  
Oluwakayode Bamiduro ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Tensile Failure ◽  
Fractographic Analysis ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Butadiene Styrene

Tensile Strength and Flexural Strength Testing of Acrylonitrile Butadiene Styrene (ABS) Materials for Biomimetic Robotic Applications

2014 ◽  
Vol 20 ◽  
pp. 11-21 ◽  
Author(s):  
Tran Linh Khuong ◽  
Zhao Gang ◽  
Muhammad Farid ◽  
Rao Yu ◽  
Zhuang Zhi Sun ◽  
...  
Keyword(s):  
Tensile Strength ◽  
3D Printing ◽  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Butadiene Styrene

Biomimetic robots borrow their structure, senses and behavior from animals, such as humans or insects, and plants. Biomimetic design is design ofa machine, a robot or a system in engineeringdomain thatmimics operational and/orbehavioral model of a biological system in nature. 3D printing technology has another name as rapid prototyping technology. Currently it is being developed fastly and widely and is applied in many fields like the jewelry, footwear, industrial design, architecture, engineering and construction, automotive, aerospace, dental and medical industry, education, geographic information system, civil engineering, guns. 3D printing technology is able to manufacture complicated, sophisticated details that the traditional processing method cannot manufacture. Therefore, 3D printing technology can be seen as an effective tool in biomimetic, which can accurately simulate most of the biological structure. Fused Deposition Modeling (FDM) is a technology of the typical rapid prototyping. The main content of the article is the focusing on tensile strength test of the ABS-Acrylonitrile Butadiene Styrene material after using Fused Deposition Modeling (FDM) technology, concretization after it’s printed by UP2! 3D printer. The article focuses on two basic features which are Tensile Strength and Determination of flexural properties.

scholarly journals Biomaterials: Polylactic Acid and 3D Printing Processes for Orthosis and Prosthesis

2017 ◽  
Vol 54 (1) ◽  
pp. 98-102 ◽  
Author(s):  
Roxana Miclaus ◽  
Angela Repanovici ◽  
Nadinne Roman
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Medical Devices ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition ◽  
The Past ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

Since the development of 3D printing, over the past decades, the domain of application has evolved significantly! Concerning the orthosis and prosthesis manufacturing, the 3D printing offers many possibilities for developing new medical devices for people with disabilities. Our paper wish to synthetize the main 3D printing methods and the biomaterial properties which can be used in orthosis and prosthesis manufacturing, like polylactic acid or acrylonitrile butadiene styrene. Fused Deposition Modeling and Stereo lithography are most used for medical devices manufacturing and usually using polylactic acid, considering the properties of this polymer and de organic componence.

Sign in / Sign up

Export Citation Format

Share Document