Soil conservation and environmental concerns in agriculture

2020 ◽  
pp. 67-79
Author(s):  
Yu. Kravchenko

In Ukraine 57.5 % of agricultural land is subjected to erosion with 10–24 million tons of humus, 0.3–0.96 million tons of nitrogen, 0.7–0.9 million tons of phosphorus and 6–12 million tons of potassium lost annually. Degradation processes are also common on chernozems, which cover about 60 % of the Ukrainian territory. The aim of the research is to defi ne the most eff ective soil conservation practices and legislative decisions aimed to conservation/recovering the Ukrainian chernozem fertility. The experimental data of the agrochemical certifi cation of Ukrainian lands, data from scientifi c papers, stock and instructional materials as well as our own fi eld and laboratory studies were used. It has been established that the long-term use of deep subsurface tillage on typical chernozem increases, compared with plowing, the content of 10–0.25 mm of air-dry and water-resistant aggregates, the bulk density, soil water storages, water infi ltration rates, the content of mobile phosphorus and exchangeable potassium, pHH2O, CaCO3 stocks, the contents of humic and fulvic acids, molecular weights of humic acids – by 5.5 and 3.06 %; 0.05 g/cm3; 25.5 mm; 22.6 mm/h; 0.1 and 3 mg/100 g of soil; 0.03 pHH2O; 18 t/ha, 0.02 and 0.04 %, 91195 kDa, respectively. Fertilizers may contribute to the crop yields increase from by 60% in the Polissya, by 40 % – in the Forest Steppe, by 15 % – in the Wet Steppe, by 10 % – in the Dry Steppe and by 40 % – in the Irrigated Steppe areas. In soil-conservation rotations, the crop placement and alternation are advisable to combine with strips or hills sowing, taking into account the local relief features; soil alkalinization, applying anti-erosion structures. Ukrainian agriculture will receive additional 10–12 million tons of forage units or 20–22 % from all fodder in a fi eld agriculture under increasing 8–10 % of arable lands for intercrops. It is advisable to mulch the eroded chernozems of Ukraine depending on their texture composition: 1.3 t/ha of mulch for sandy and loamy soils, 1.9 t/ha – for sandy and 1.1 t/ha – for loamy soils. The implementation of soil conservation agriculture can minimize some soil degradation processes and improve eff ective soil properties required to realize the biological potential of cultivated plants. Key words: chernozem, degradation, fertility, soil conservation technologies, agriculture policy.


2019 ◽  
Vol 10 ◽  
pp. 1853-1863
Author(s):  
Kassaye Gurebiyaw Legese ◽  
Taye Melese ◽  
Tadie Mire ◽  
Abebe Birara ◽  
Kefale Eniyew

Soil is a crucial and precious natural resource that govern numerous ecological processes. However, in Ethiopia particularly in north Gondar zone, soil erosion is a severe problem and a major cause of the decline of agricultural productivity. The adoption and diffusion of soil and water conservation practices (SWC), as a way to tackle this challenge, has become an important issue in the development policy agenda in the zone. Therefore, this study was to identify factors affecting Soil conservation investments in the North Gondar zone. Data was collected through interviewed schedule, filed observation and focus group discussion. The multistage sampling technique was employed to select 206 sample households.  Both descriptive and econometrics model was used to analyze the collected data. A multivariate profit (MPV) model was used to analyze the effect of demographic, socioeconomic, market, institutional and biophysical related factors on the interdependent investment decisions of SWC practices using household survey. The MPV model analysis indicates that farmers invest a combination of practices at parcel level by considering substitution and complementarity effects of the practices. The results also revealed that age of household heads, literacy status of household heads, off-farm activity, distance of farmlands from homesteads, tropical livestock unit, and access to training were influence farmers’ investments in SWC practices. The overall results indicate that the identified physical, socioeconomic, and institutional factors influence promote or hinder investments in SWC practice so, policymakers should take into consideration these various factors in designing and implementing SWC policies and Programmers.


2020 ◽  
Author(s):  
Christopher James Hopwood ◽  
Ted Schwaba ◽  
Wiebke Bleidorn

Personal concerns about climate change and the environment are a powerful motivator of sustainable behavior. People’s level of concern varies as a function of a variety of social and individual factors. Using data from 58,748 participants from a nationally representative German sample, we tested preregistered hypotheses about factors that impact concerns about the environment over time. We found that environmental concerns increased modestly from 2009-2017 in the German population. However, individuals in middle adulthood tended to be more concerned and showed more consistent increases in concern over time than younger or older people. Consistent with previous research, Big Five personality traits were correlated with environmental concerns. We present novel evidence that increases in concern were related to increases in the personality traits neuroticism and openness to experience. Indeed, changes in openness explained roughly 50% of the variance in changes in environmental concerns. These findings highlight the importance of understanding the individual level factors associated with changes in environmental concerns over time, towards the promotion of more sustainable behavior at the individual level.


Author(s):  
T.W. Lee

Abstract WET ETCHING is an important part of the failure analysis of semiconductor devices. Analysis requires etches for the removal, delineation by decoration or differential etching, and study of defects in layers of various materials. Each lab usually has a collection of favored etch recipes. Some of these etches are available premixed from the fab chemical supply. Some of these etches may be unique, or even proprietary, to your company. Additionally, the lab etch recipe list will usually contain a variety of classical "named etches". These recipes, such as Dash Etch, have persisted over time. Although well-reported in the literature, lab lists may not accurately represent these recipes, or contain complete and accurate instructions for their use. Time seems to have erased the understanding of the purpose of additives such as iodine, in some of these formulas. To identify the best etches and techniques for a failure analysis operations, a targeted literature review of articles and patents was undertaken. It was a surprise to find that much of the work was quite old, and originally done with germanium. Later some of these etches were modified for silicon. Much of this work is still applicable today. Two main etch types were found. One is concerned with the thinning and chemical polishing of silicon. The other type is concerned with identifying defects in silicon. Many of the named etches were found to consist of variations in a specific acid system. The acid system has been well characterized with ternary diagrams and 3-D surfaces. The named etches were plotted on this diagram. The original formulas and applications of the named etches were traced to assure accuracy, so that the results claimed by the original authors, may be reproduced in today's lab. The purpose of this paper is to share the condensed information obtained during this literature search. Graphical data has been corrected for modem dimensions. Selectivities have been located and discussed. The contents of more than 25 named etches were spreadsheeted. It was concluded that the best approach to delineation is a two-step etch, using uncomplicated and well-characterized standard formulas. The first step uses a decoration or differential etch technique to define the junctions. Formulations for effective decoration etches were found to be surprisingly simple. The second step uses a selective etch to define the various interconnections and dielectric layers. Chromium compounds can be completely eliminated from these formulas, to meet environmental concerns. This work, originally consisting of 30 pages with 106 references, has been condensed to conform with the formatting requirements of this publication.


1940 ◽  
Vol 32 (1) ◽  
pp. 86-86
Author(s):  
C. S. S.
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document