scholarly journals Environmentally Friendly Electric Energy Development Model

Author(s):  
Ahmad Hermawan ◽  
Abdul Hakim ◽  
Marjono Marjono ◽  
Bambang Semedi

The increased production of electrical energy will lead to an increase on the use of fossil fuels which ultimately raise the Greenhouse Gas (GHG) emissions. The use of fossil fuels (non-renewable fuels) for large-scaled generation of electrical energy will certainly cause problems considering oil and coal reserves as the main source for PLTU will shrink and run out over time. In addition, several environmental problems need to be considered and studied regarding this condition. Thus, it is very important to efficiently use electrical energy according to Presidential Instruction No. 6 of 2014 concerning energy development which focused on sub-sectors electricity development and minimization of fossil energy use as well as development of new, renewable, and converted energies. Based on this, a system which can support energy saving is needed. A system used for regulating energy needs is called the Energy Management System (EMS). The study was conducted in the Malang State Polytechnic Campus which is located on Jalan Soekarno Hatta no. 9, Jatimulyo, Lowokwaru Sub-district, Malang City. The sample used in this study consists of 230 people, including 150 students, 30 lecturers and 50 academics. This study is purposed to examine the correlation of the four variables to the energy management system and the use of environmentally friendly energy. Thus, the most appropriate model to accommodate this requirement is Structural Equation Modeling (SEM). The results of SEM analysis showed that the model of an environmentally friendly electric energy management is said to be feasible to be developed, thus it can be collectively adapted in all aspects for creating a green campus.

2019 ◽  
Vol 13 (6) ◽  
pp. 961-972 ◽  
Author(s):  
Lukas Sigrist ◽  
Jose Maria Fernández ◽  
Enrique Lobato ◽  
Luis Rouco ◽  
Inmaculada Saboya ◽  
...  

2020 ◽  
Vol 1569 ◽  
pp. 042004
Author(s):  
Adhiel Akbar ◽  
Junartho Halomoan ◽  
Desri Kristina Silalahi

This paper presents the details of the installation of the energy management system in the buildings of a typical Residential Building Residential Building in India and consequently the reduction of electrical energy consumption. Increasing People intake, the introduction of new courses, research centers and laboratories, and the rapid expansion of Residential Building infrastructure, are rapidly increasing the demand for electricity in universities. Most of the electrical energy consumed in universities in India is for air conditioning and lighting purposes. Established Building Energy Management System (BMS) continuously monitors the electrical load demand of air handling units (AHUs) and room lighting in buildings and reduces the load demand by fitting the AHU thermostats based on the work schedule. One day and on / off control of occupancy based on occupancy in different rooms from remote server rooms via Ethernet. Preliminary findings suggest that a significant reduction in load demand can be achieved in any Residential Building in India through the implementation of BMS, thereby contributing to the reduction of domestic oil consumption. If most universities in the country installed BMS on their Residential Buildinges, it would be possible for electric utilities to use real-time meter data, technology-enabled dynamic pricing, and decisive direct load control for fuel management. There are Residential Buildinges. This paper also highlights the future trend in BMS implementation in universities, as the Residential Building's DSM has a secure Residential Building area network that can effectively use demand response when enabled by high-bandwidth, two-way, end-to-end. Can. Communication in a smart grid environment.


2011 ◽  
pp. 515-523
Author(s):  
Ekata Mehul ◽  
Rahul Shah

Currently, there are global efforts being made for energy saving. Lot of efforts are being done exploring the generation of alternative resources of energy – also called renewable energies which includes solar, nuclear, water and wind, to name but a few. Besides investigations of renewable energies, a global attempt is also being made to save energy consumption and reduce carbon emissions. A need to have a comprehensive Energy Management System could not have been felt more by both businesses and individuals. This Chapter describes features required for a complete system of energy management focusing on Electrical Energy. The system is designed making use of wireless sensor network & standard protocols. Chapter will address firstly the theoretical aspects of energy management followed by the detailed model for Automatic Meter Reading concept. We will focus on the features of such an Energy Management System & limits our scope to the detailing of Automatic Meter Reading concept and design.


2021 ◽  
Vol 69 (1) ◽  
pp. 19-29
Author(s):  
Houssam ZERARI ◽  
Lotfi MESSIKH ◽  
Abdellah KOUZOU ◽  
Salim OUCHTATI

The public lighting system was being a vital part all over the world for many years. Indeed, as the number of population and urbanism grow, this system is becoming a primordial part of our life comfort. Therefore, it is used extensively leading to an increased important amount of electrical energy being consumed. This paper proposes an idea of an intelligent energy management system (EMS) for public lightening system consumption based on an autonomous hybrid sources of electrical energy. It is composed of a PV system installed at the top of the lightening system and a battery storage system, where an intelligent energy management system is used to ensure the charging of the battery during the daylight with the option of supporting the PV system production in case of low period irradiation during the day. Whereas, during the night, the battery fully powers the lightening system. In the same for the protection of the battery system and its related lifespan, the proposed (EMS) takes into accounts this issue. Furthermore, this system has the ability of recognizing accurately the basic data on the length of the day, the sunrise time and sunset time automatically based on the location of the used public lightening system which is defined by its longitude and latitude. The proposed EMS is built around a special electronics card including display screen of main information with the insertion of special sensors such as current and voltage sensors, which were built by the authors. The proposed system has been tested in a known location where the obtained results prove the validity of the proposed management system for ensuring the operation of the public lightening system.


Author(s):  
Dr. Subarna Shakya

Energy is an essential parameter for any work to be done. An electric energy is a primary requirement for any wireless transmission system. Transmitting the information from a source to destination requires a continuous and strengthen wireless network connection to avoid interruption from electromagnetic disturbance. Powering such wireless networks can be done by giving direct current through a battery or from direct supply. The challenge comes when the wireless sensor network is fixed in a remote place or designed as a moving system for sensing analysis. Battery sourcing power system will be a better choice for such movable wireless system. The paper proposes a hybrid energy management system for wireless sensor networks (WSNs) connected in remote areas and it analyses the performance of the energy management system in terms of amount of energy can be generated for a battery source.


2021 ◽  
Vol 1878 (1) ◽  
pp. 012035
Author(s):  
K. Ananda-Rao ◽  
M. A. Ismail ◽  
A. S. Rosmi ◽  
W. Z. Leow ◽  
S. M. Suboh ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document