scholarly journals EXPERIMENTAL STUDY ON ASCORBIC ACID ADDITIVE AS GREEN INHIBITOR AGAINST CORROSION OF MILD STEEL

2019 ◽  
Vol 5 (1) ◽  
pp. 01-09
Author(s):  
Arwa AL-Amouri ◽  
Priy Brat Dwivedi
Keyword(s):  
Weight Loss ◽  
Ascorbic Acid ◽  
Corrosion Rate ◽  
Sodium Bicarbonate ◽  
Mild Steel ◽  
Tap Water ◽  
Acid Inhibitor ◽  
Weight Loss Method ◽  
Aluminum Paint ◽  
Loss Method

Purpose of study: The corrosion behavior of mild steel and the inhibition effect of ascorbic acid (an anti-oxidant additive) on aluminum coatings on the mild steel have been studied by weight loss technique under different corrosive medium.  Methodology: Tap water, 3% Na2CO3 solution, seawater and open-air were chosen as different corrosive medium at ambient temperature range of 35- 400C. Corrosion was recorded using the weight-loss method and the rate was calculated. Later similar mid steel samples were coated with Sodium Bicarbonate paste, aluminum paint with ascorbic acid additive, and aluminum paint without ascorbic acid additive, in similar corroding medium, and the corrosion rate was calculated using the weight-loss method.  Main Findings: Results show that the percentage of mild steel corrosion was found to be highest in the seawater and lowest in 3% Na2CO3 solution. Sodium Bicarbonate paste reduces the corrosion rate more studies on the corrosion protection was performed by coating the mild steel surface with aluminum paint along with ascorbic acid inhibitor i.e., a green corrosion inhibitor and it was found that the weight loss data is: 85.03 g from 85.05 g, 82.39 g from 82.43 g, no weight loss and 85.73 g from 85.74 g in tap water, seawater, 3% Na2CO3 solution and air medium respectively. Thus, the addition of ascorbic acid inhibitor gave the highest inhibition efficiency for aluminum paint. 

Corrosion Behaviour of Aluminium Alloy in Palm Oil Methyl Ester (B100)

2012 ◽  
Vol 58 (2) ◽  
Author(s):  
W. B. Wan Nik ◽  
S. Syahrullail ◽  
R. Rosliza ◽  
M. M. Rahman ◽  
M. F. R. Zulkifli
Keyword(s):  
Weight Loss ◽  
Methyl Ester ◽  
Corrosion Rate ◽  
Aluminium Alloy ◽  
Palm Oil ◽  
Corrosion Behaviour ◽  
Corrosion Current ◽  
Electrochemical Test ◽  
Weight Loss Method ◽  
Loss Method

The aim of this study is to determine the corrosion effect of palm oil methyl ester (POME) on aluminium alloy 5083 (AA5083). The static immersion test was carried out at 60°C for 68 days according to ASTM G–31–72. The corrosion analysis was done by using weight loss method and electrochemical test. The result from weight loss method shows the decreasing in weight loss of AA5083 which signifies the ability of POME to reduce corrosion rate. The electrochemical test shows the decreasing in polarization resistance,Rp, while the corrosion current densities, Icorr, increase. The corrosion rate reduces from 2.250mpy to 0.1946mpy. The low concentration of fatty acid C18:2 and high anti oxidant element contributes to the reduction of corrosion rate of AA5083 in POME.

scholarly journals The inhibition of mild steel corrosion in 0.5 M H2SO4 solution by radish leaf extract

RSC Advances ◽  
2019 ◽  
Vol 9 (70) ◽  
pp. 40997-41009 ◽  
Author(s):  
Dongyi Li ◽  
Panpan Zhang ◽  
Xinyu Guo ◽  
Xiaowei Zhao ◽  
Ying Xu
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Electrochemical Method ◽  
Leaf Extract ◽  
Steel Corrosion ◽  
Inhibitory Effect ◽  
H2so4 Solution ◽  
Mild Steel Corrosion ◽  
Weight Loss Method ◽  
Loss Method

The inhibitory effect of radish leaf extract (RLE) on mild steel corrosion in 0.5 M H2SO4 was studied by the weight loss method and the electrochemical method.

Inhibition of Aloe in Corrosion Experimental Research

2011 ◽  
Vol 233-235 ◽  
pp. 648-651
Author(s):  
Ai Jun Wei ◽  
Bei Feng ◽  
Xin Zhang ◽  
Fu Yong Huo
Keyword(s):  
Weight Loss ◽  
Corrosion Rate ◽  
Work Environment ◽  
Corrosion Inhibition ◽  
Corrosion Test ◽  
Inhibition Effect ◽  
Corrosion Medium ◽  
Different Temperatures ◽  
Weight Loss Method ◽  
Loss Method

In this corrosion test, simulated brine is used as corrosion medium, added different concentrations of aloe juice. Static weight-loss method is employed, meanwhile, we calculated corrosion rate of Q235 steel and researched on the corrosion inhibition effect of aloe in different temperatures. Results show that aloe is a good inhibitor, rate of corrosion inhibition can reach 80% or more and suitable for the temperature of work environment is less than 60 °C.

scholarly journals Microbial Corrosion of API 5L X-70 Carbon Steel by ATCC 7757 and Consortium of Sulfate-Reducing Bacteria

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Arman Abdullah ◽  
Nordin Yahaya ◽  
Norhazilan Md Noor ◽  
Rosilawati Mohd Rasol
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Rate ◽  
Sulfate Reducing Bacteria ◽  
Desulfovibrio Vulgaris ◽  
Corrosion Morphology ◽  
Sulfate Reducing ◽  
Weight Loss Method ◽  
Loss Method ◽  
Reducing Bacteria

Various cases of accidents involving microbiology influenced corrosion (MIC) were reported by the oil and gas industry. Sulfate reducing bacteria (SRB) have always been linked to MIC mechanisms as one of the major causes of localized corrosion problems. In this study, SRB colonies were isolated from the soil in suspected areas near the natural gas transmission pipeline in Malaysia. The effects of ATCC 7757 and consortium of isolated SRB upon corrosion on API 5L X-70 carbon steel coupon were investigated using a weight loss method, an open circuit potential method (OCP), and a potentiodynamic polarization curves method in anaerobic conditions. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were then used to determine the corrosion morphology in verifying the SRB activity and corrosion products formation. Results from the study show that the corrosion rate (CR) of weight loss method for the isolated SRB is recorded as 0.2017 mm/yr compared to 0.2530 mm/yr for ATCC 7757. The Tafel plot recorded the corrosion rate of 0.3290 mm/yr for Sg. Ular SRB and 0.2500 mm/yr forDesulfovibrio vulgaris. The results showed that the consortia of isolated SRB were of comparable effects and features with the single ATCC 7757 strain.

PENGARUH BASIC SEDIMENT AND WATER TERHADAP LAJU KOROSI PIPA X52 DAN A53 PADA MEDIA OIL SLUDGE.

ROTOR ◽  
2017 ◽  
Vol 10 (1) ◽  
pp. 13
Author(s):  
Naufan Arviansyah ◽  
Sumarji Sumarji ◽  
Digdo Listyadi Setyawan
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Rate ◽  
Low Carbon Steel ◽  
Measuring Method ◽  
Oil Sludge ◽  
Uniform Corrosion ◽  
Low Carbon ◽  
Weight Loss Method ◽  
Loss Method

This research have a purpuse to know corrosion rate in pipe X52 and A53 at oil sludge media caused BS and W. Corrosion is a damage of metal that occurs because reaction between metal with environtment and produce unwanted of corrosion product. Pipe X52 and A53 is a type of low carbon steel that use for fluid transportation system in industry. Oil sludge is a sediment of crude oil from main gathering storage and containing variouses elements. Oil sludge have a one of element is Basic Sediment and Water that is can make corrosion happen to distribution pipes. Measuring Method used in this research is weight loss method. The result of corrosion rate in Oil Sludge media containing 30,17% BS and W for pipe A53 is 1,64 x 10-2 mmpy and the result for pipa X52 is 2,47 x 10-2 mmpy. The result of corrosion rate in Oil Sludge media containing 60,67% BS and W for pipe A53 is 2,12 x 10-2 mmpy and for pipe X52 the result is 3,13 x 10-2 mmpy. The result of this research showed pipe A53 have more resistance than pipe X52. The corrosion is classified as uniform corrosion. Keywords : A53, Weight Loss, Oil Sludge, X52.

scholarly journals A Comparative Study on Corrosion Inhibition of Mild Steel UsingPiper NigrumL. in Different Acid Medium

2010 ◽  
Vol 7 (3) ◽  
pp. 942-946 ◽  
Author(s):  
B. Anand ◽  
V. Balasubramanian
Keyword(s):  
Weight Loss ◽  
Hydrochloric Acid ◽  
Mild Steel ◽  
Acid Medium ◽  
Sulphuric Acid ◽  
Corrosion Inhibition ◽  
Piper Nigrum ◽  
Time Interval ◽  
Weight Loss Method ◽  
Loss Method

The inhibition of corrosion of mild steel usingPiper nigrumL in different acid medium by weight loss method was investigated. The corrosion inhibition was studied in hydrochloric acid and sulphuric acid by weight loss method at different time interval at room temperature. The result showed that the corrosion inhibition efficiency of this compound was found to vary with different time interval and different acid concentration. Also, it was found that the corrosion inhibition behavior ofPiper nigrumL is greater in sulphuric acid than hydrochloric acid. So,Piper nigrumL can be used as a good inhibitor for preventing mild steel material.

scholarly journals New Corrosion Inhibitor Derived from Coumarin

2017 ◽  
Author(s):  
Ahmed Al-Amiery
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Weight Loss ◽  
Fourier Transform ◽  
Magnetic Resonance ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Damage Reduction ◽  
Weight Loss Method ◽  
Loss Method ◽  
Hcl Solution

New corrosion inhibitor derived from coumarin-3-amine namely 3-((2-chlorobenzylidene)amino)coumarin was synthesized and characterized by CHN elemental analysis in addition to Fourier transform infrared and nuclear magnetic resonance techniques. The anti-corrosion ability of 3-((2-chlorobenzylidene)amino)coumarin to inhibit the impacts of corrosion has been demonstrated and damage reduction of the mild steel also. 3-((2-chlorobenzylidene)amino)coumarin, has been employed as a good corrosion inhibitor for mild steel in HCL solution. The efficiency of the inhibition was figured according to weight loss method and it was 74.6%.

scholarly journals Corrosion Inhibition of Bark Extract of Euphorbia royleana on Mild Steel in 1M HCl

2019 ◽  
Vol 40 ◽  
pp. 25-29
Author(s):  
Bishal Thapa ◽  
Dipak Kumar Gupta ◽  
Amar Prasad Yadav
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Inhibition Efficiency ◽  
Bark Extract ◽  
Potential Measurement ◽  
Maximum Inhibition ◽  
Weight Loss Method ◽  
Loss Method ◽  
Loss Experiment

The bark extract of Euphorbia royleana as a green corrosion inhibitor was studied in 1M HCl using weight-loss method and potential measurement. The results show that the bark extract of Euphorbia royleana is an effective anti-corrosion inhibitor of mild steel in acidic media. The corrosion rate decreases with the time of immersion. Weight loss experiment shows that the loss in weight decreases with the time of immersion and inhibition efficiency increases with the concentration of extract. It was observed that maximum inhibition efficiency is 99.60% in 100% concentration of extract. Potential measurement study shows that bark extracts act as a mixed type of inhibitor i.e. inhibits both anodically as well as cathodically. 

scholarly journals Natural Polymer of Iraqi Apricot Tree Gum as a Novel Corrosion Inhibitor for Mild Steel in 1 M HCl Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
I. M. Alwaan ◽  
Fouad Kadhim Mahdi
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Polymer Concentration ◽  
Natural Polymer ◽  
Free Energy Of Adsorption ◽  
Adsorption Enthalpy ◽  
Enthalpy Of Adsorption ◽  
Weight Loss Method ◽  
Loss Method ◽  
Apricot Tree

Corrosion inhibition of mild steel in 1 M hydrochloric acid using Iraqi apricot tree gum Arabic as natural polymer was studied. The weight loss method was used to predict the efficiency of the inhibitor on corrosion of mild steel in a temperature range of 17–40°C. The FTIR result of natural polymer revealed that the C=O and O-H groups were found in the structure of the natural polymer. The results of weight loss method showed that the inhibition efficiency (I%) increased with the increase in both the natural polymer concentration and the temperature; therefore, chemical adsorption mechanism was suggested in this system. The different mathematical models of the adsorption isotherms were studied and the results revealed that natural polymer was found to obey Temkin, Langmuir, and Freundlich adsorption isotherm. The activation energy of adsorption, enthalpy of adsorption, and entropy of adsorption were obtained for different concentrations of natural polymer (0, 0.1, 0.2, and 0.3 g/L) and the results showed that the thermodynamic properties decreased with the loading of a natural polymer. Gibbs free energy of adsorption results was a minus value that led to the conclusion of the spontaneous adsorption of the natural polymer in this system.

scholarly journals Application of Organic Inhibitors to the Corrosion of Materials AISI 1070 Steel

2021 ◽  
Vol 2 (1) ◽  
pp. 12-20
Author(s):  
Destri Muliastri ◽  
Devi Eka Septiyani ◽  
Naufal Afif ◽  
Vania Tingting Sirenden ◽  
Januar Nur Rohmah Suprihartini
Keyword(s):  
Weight Loss ◽  
Fourier Transform ◽  
Corrosion Rate ◽  
Leaf Extract ◽  
Inhibition Efficiency ◽  
H2so4 Solution ◽  
Weight Loss Method ◽  
Organic Inhibitors ◽  
Loss Method ◽  
Mango Leaves

AISI 1070 steel is a material that has corrosion when it reacts with the environment. One way to inhibit the corrosion rate is by using organic inhibitors. The organic inhibitors used mango leaves and mango rinds with variations in the concentration of organic inhibitors of 0%, 6%, and 8%, respectively. This study aimed to determine the effectiveness of mango leaf extract and mango rinds as an inhibitor against the corrosion rate of AISI 1070 Steel. The extraction was carried out using the Maceration Method. Fourier Transform Infrared (FTIR), Potenzyodinamic, and Weight Loss tests were carried out in this study.  FTIR results show that both mango rinds and mango leaf have ingredients that were able to inhibit the corrosion rate, such as flavonoid functional groups including C – H, C = O, and C – O. Using the weight-loss method, the best corrosion rate was found in the mango rinds extract with a concentration of 8 mL, which was 31.784 mm/year with an inhibition efficiency of 92%. The highest corrosion rate was in 2M H2SO4 solution using potentiodynamic, without a mixture of inhibitors, that is 0.15589478 mm/year.

Sign in / Sign up

Export Citation Format

Share Document