scholarly journals Numerical analysis on the performance of Dual Rotor wind turbine

2020 ◽  
Vol 8 (03) ◽  
pp. 352-368
Author(s):  
Hazem Ali Abdel Karim ◽  
Ahmed Reda El-Baz ◽  
Nabil Abdel Aziz Mahmoud ◽  
Ashraf Mostafa Hamed
Keyword(s):  
Wind Turbine ◽  
Rotational Speed ◽  
Pitch Angle ◽  
Numerical Study ◽  
Three Dimensional ◽  
Scale Model ◽  
Power Coefficient ◽  
Peak Performance ◽  
Small Scale ◽  
Cfd Simulations

This study investigates the aerodynamic performance of wind turbines aiming to maximize the power extracted from the wind. The study is focusing on the effect of introducing a second rotor to the main rotor of the wind turbine in what is called a dual rotor wind turbine (DRWT).  The numerical study took place on the performance of small-scale model of wind turbine of 0.9 m diameter using S826 airfoil. Both the Co-rotating and Counter rotating configurations were investigated at different tip speed ratios (TSR) and compared with the performance of the single rotor wind turbine (SRWT). Many parameters were studied for dual rotor turbines. These include the spacing between the two rotors, the pitch angle of the rear rotor and the rotational speed of ratio rear to front rotor. Three-dimensional simulations performed and employed using CFD simulations with Multi Reference Frame (MRF) technique. The Co Rotating Wind Turbine (CWT) and Counter Rotating Wind Turbine (CRWT) found to have better performance compared to that of the SRWT with an increase ranging from 12 to 14% in peak power coefficient. Moreover, the effect of changing the pitch angle of the rear rotor on the overall performance found to be of a negligible effect between angles 0⁰ until 2⁰ degrees tilting toward the front rotor. On the other hand, the ratio of rotational speed of the rear rotor to the front rotor found to cause a further increase in the peak performance of the CWT and CRWT ranging from 3 to 5%.

Numerical Investigation of a Vertical Axis Wind Turbine Performance Characterization Using New Variable Pitch Control Scheme

2019 ◽  
Vol 142 (3) ◽  
Author(s):  
Amin A. Mohammed ◽  
Ahmet Z. Sahin ◽  
Hassen M. Ouakad
Keyword(s):  
Wind Turbine ◽  
Pitch Angle ◽  
Numerical Study ◽  
Average Power ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Variable Pitch ◽  
De Algorithm

Abstract A double multiple streamtube model coupled with variable pitch methodology is used to analyze the performance characteristics of a small-scale straight-bladed Darrieus type vertical axis wind turbine (SB-VAWT). The numerical study revealed that a fixed pitch of −2.5 deg could greatly enhance the performance of the wind turbine. However, no improvement is observed in the starting torque capacity. Furthermore, the performance of upwind and downwind zones has been investigated, and it is found that the VAWT starting capacity is improved by increasing/decreasing the pitch angle upwind/downwind of the turbine. To optimize the performance, four cases of variable pitch angle schemes of sinusoidal nature were examined. The parameters of the sinusoidal functions were optimized using differential evolution (DE) algorithm with different cost functions. The results showed improvement in the power coefficient, yet with low starting capacity enhancement. Among the objective functions used in DE algorithm, the negative of the average power coefficient is found to lead to the best starting capacity with moderate peak power coefficient.

scholarly journals Canard optimization for enhancing the performance of small horizontal axis wind turbine at low wind speeds

2020 ◽  
Vol 37 ◽  
pp. 63-71
Author(s):  
Yui-Chuin Shiah ◽  
Chia Hsiang Chang ◽  
Yu-Jen Chen ◽  
Ankam Vinod Kumar Reddy
Keyword(s):  
Wind Turbine ◽  
Urban Areas ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Peak Performance ◽  
Small Scale ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Optimum Parameters ◽  
Low Wind Speeds

ABSTRACT Generally, the environmental wind speeds in urban areas are relatively low due to clustered buildings. At low wind speeds, an aerodynamic stall occurs near the blade roots of a horizontal axis wind turbine (HAWT), leading to decay of the power coefficient. The research targets to design canards with optimal parameters for a small-scale HAWT system operated at variable rotational speeds. The design was to enhance the performance by delaying the aerodynamic stall near blade roots of the HAWT to be operated at low wind speeds. For the optimal design of canards, flow fields of the sample blades with and without canards were both simulated and compared with the experimental data. With the verification of our simulations, Taguchi analyses were performed to seek the optimum parameters of canards. This study revealed that the peak performance of the optimized canard system operated at 540 rpm might be improved by ∼35%.

Numerical Study of Pitch Angle on H-Type Vertical Axis Wind Turbine

2012 ◽  
Vol 499 ◽  
pp. 259-264
Author(s):  
Qi Yao ◽  
Ying Xue Yao ◽  
Liang Zhou ◽  
S.Y. Zheng
Keyword(s):  
Wind Turbine ◽  
Pitch Angle ◽  
Numerical Study ◽  
Vertical Axis ◽  
Azimuth Angle ◽  
Power Coefficient ◽  
Cfd Model ◽  
Vertical Axis Wind Turbine ◽  
Sliding Mesh ◽  
Mesh Technique

This paper presents a simulation study of an H-type vertical axis wind turbine. Two dimensional CFD model using sliding mesh technique was generated to help understand aerodynamics performance of this wind turbine. The effect of the pith angle on H-type vertical axis wind turbine was studied based on the computational model. As a result, this wind turbine could get the maximum power coefficient when pitch angle adjusted to a suited angle, furthermore, the effects of pitch angle and azimuth angle on single blade were investigated. The results will provide theoretical supports on study of variable pitch of wind turbine.

scholarly journals Investigation of an Innovative Rotor Modification for a Small-Scale Horizontal Axis Wind Turbine

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2649 ◽  
Author(s):  
Artur Bugała ◽  
Olga Roszyk
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Cfd Simulation ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Small Scale ◽  
Horizontal Axis Wind Turbine ◽  
Airflow Distribution

This paper presents the results of the computational fluid dynamics (CFD) simulation of the airflow for a 300 W horizontal axis wind turbine, using additional structural elements which modify the original shape of the rotor in the form of multi-shaped bowls which change the airflow distribution. A three-dimensional CAD model of the tested wind turbine was presented, with three variants subjected to simulation: a basic wind turbine without the element that modifies the airflow distribution, a turbine with a plano-convex bowl, and a turbine with a centrally convex bowl, with the hyperbolic disappearance of convexity as the radius of the rotor increases. The momentary value of wind speed, recorded at measuring points located in the plane of wind turbine blades, demonstrated an increase when compared to the base model by 35% for the wind turbine with the plano-convex bowl, for the wind speed of 5 m/s, and 31.3% and 49% for the higher approaching wind speed, for the plano-convex bowl and centrally convex bowl, respectively. The centrally convex bowl seems to be more appropriate for higher approaching wind speeds. An increase in wind turbine efficiency, described by the power coefficient, for solutions with aerodynamic bowls was observed.

Computational Analysis of an Optimized Curved-Bladed Small-Scale Horizontal Axis Wind Turbine

2020 ◽  
Vol 143 (6) ◽  
Author(s):  
Ali M. Abdelsalam ◽  
W. A. El-Askary ◽  
M. A. Kotb ◽  
I. M. Sakr
Keyword(s):  
Wind Turbine ◽  
Flow Behavior ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Peak Performance ◽  
Small Scale ◽  
Horizontal Axis Wind Turbine ◽  
Axial Thrust ◽  
Wind Speeds ◽  
Linear Profiles

Abstract This article aims to study numerically the effect of curvature of linear blade profile on the performance of small-scale horizontal axis wind turbine (SSHAWT). Rotors with two curvature types, f forward angles 5 deg, 10 deg, 15 deg, 20 deg, 30 deg, and 45 deg and backward angles −5 deg, −10 deg, and −15 deg, are investigated. Furthermore, three curvature positions of r/R = 0.8, 0.9, and 0.95 are studied. The numerical simulations are performed on rotors of radius 0.5 m at different wind speeds. The results are compared with straight rotor of linear profiles of chord and twist, which is considered as base rotor. It is found that the rotor with forward curvature of 5 deg and r/R = 0.9 has the highest power coefficient compared with the other rotors. At the peak performance, the proposed rotor reduces the axial thrust by about 12.5% compared with the base rotor. The flow behavior represented by the streamlines contours is also discussed. In such case, the separation approximately disappeared for the tip speed ratios of 5 and 6, which is responsible for the performance peak.

Wake Patterns in a Dual-Rotor Wind Turbine

2020 ◽  
Author(s):  
K. Asfar ◽  
A. Mahasneh
Keyword(s):  
Wind Turbine ◽  
Numerical Study ◽  
Mechanical Energy ◽  
Orientation Angle ◽  
Rotor Blades ◽  
Scale Model ◽  
Small Scale ◽  
Complex Flow ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds

Abstract A recently patented novel idea of an adjustable dual-rotor horizontal-axis wind turbine is investigated [1]. The idea behind this proposed design is to continue to extract more mechanical energy from the wind stream which has already passed through the front rotor by having a second identical rotor on the other side of the main shaft of the wind turbine. The complex flow in the dual-rotor is studied using computational fluid dynamics. The optimum performance of this unit is when the wake from each blade in the first rotor passes through the spacing between each two rear rotor blades while the undisturbed part of the wind stream is intercepted by the rear rotor blades. The strength and pattern of the wakes are determined for low and high wind speeds. The numerical study verified the feasibility of the proposed idea. The optimum orientation angle at which no interception of the front rotor wake by any of the rear rotor blades is found to be 60°. The axial spacing between the front and rear rotors is also investigated. A small scale model was built and tested in a subsonic wind tunnel. The comparison showed that the dual-rotor wind turbine produced nearly 100% more power than the single-rotor wind turbine.

scholarly journals Numerical evaluation of aerodynamic performances of vertical-axis wind turbine rotor with flow concentrator

2020 ◽  
Author(s):  
Jelena Svorcan ◽  
◽  
Ognjen Peković ◽  
Toni Ivanov ◽  
Miloš Vorkapić ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Operating Conditions ◽  
Power Coefficient ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Flow Simulations ◽  
Wind Speeds

With wind energy extraction constantly increasing, the interest in small-scale urban wind turbines is also expanding. Given that these machines often work in adverse operating conditions (Earth’s boundary layer, vortex trails of surrounding objects, small and changeable wind speeds), additional elements that locally augment wind velocity and facilitate turbine start may be installed. This paper investigates possible benefits of adding an optimized flow concentrator to a vertical-axis wind turbine (VAWT) rotor. Three-dimensional, unsteady, turbulent, incompressible flow simulations of both isolated rotor consisting of three straight blades and a rotor with flow concentrator have been performed in ANSYS FLUENT by finite volume method for several different operational regimes. This type of flow simulations is challenging since flow angles are high, numerous flow phenomena and instabilities are present and the interaction between the blades and detached vortices can be significant. The rotational motion of the blades is solved by the unsteady Sliding Mesh (SM) approach. Flow field is modeled by Unsteady Reynolds Averaged Navier-Stokes (URANS) equations with k-ω SST turbulence model used for closure. Both quantitative and qualitative examinations of the obtained numerical results are presented. In particular, the two computed power coefficient curves are compared and the advantages of installing a flow concentrator are accentuated.

A Numerical Study on the Effects of Unsteady Wind on Vertical Axis Wind Turbine Performance

2013 ◽  
Author(s):  
Louis Angelo Danao ◽  
Jonathan Edwards ◽  
Okeoghene Eboibi ◽  
Robert Howell
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Numerical Study ◽  
Angle Of Attack ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Peak Performance ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio

Numerical simulations using RANS–based CFD have been utilised to carry out investigations on the effects of unsteady wind in the performance of a wind tunnel vertical axis wind turbine. Using a validated CFD model, unsteady wind simulations revealed a fundamental relationship between instantaneous VAWT CP and wind speed. CFD data shows a CP variation in unsteady wind that cuts across the steady CP curve as wind speed fluctuates. A reference case with mean wind speed of 7m/s, wind speed amplitude of ±12%, fluctuating frequency of 0.5Hz and mean tip speed ratio of 4.4 has shown a wind cycle mean power coefficient of 0.33 that equals the steady wind maximum. Increasing wind speed causes the instantaneous tip speed ratio to fall which leads to higher effective angle of attack and deeper stalling on the blades. Stalled flow and rapid changes in angle of attack of the blade induce hysteresis loops in both lift and drag. Decreasing wind speeds limit the perceived angle of attack seen by the blades to near static stall thus reducing the positive effect of dynamic stall on lift generation. Three mean tip speed ratio cases were tested to study the effects of varying conditions of VAWT operation on the overall performance. As the mean tip speed ratio increases, the peak performance also increases.

CFD Simulations of Under Water Turbine in Gulf Stream Using RANS Method

2010 ◽  
Author(s):  
Chaouki Ghenai ◽  
Ben Oliver
Keyword(s):  
Gulf Stream ◽  
Numerical Study ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Power Coefficient ◽  
Total Power ◽  
Cfd Simulations ◽  
Local Flow ◽  
Water Turbine ◽  
Volume Method

The principal objective of this numerical study is to investigate the hydrodynamic behavior of horizontal axis underwater turbine in the Gulf Stream. The CFD analysis provides detailed information about the local flow and the performance of the underwater turbine under varying flow conditions. Three dimensional simulations were performed using a 5.6 meter diameter turbine with 3 blades. The finite volume method was used to solve the equations of conservation of mass and momentum and turbulence (k-ε equations). The flow field, turbulence, pressure distribution on the turbine blades and turbine power were obtained for a range of water speed (1–6 m/s) and rotation speed of turbine (1–10 rad/s). The z-velocity profiles behind the turbine were used to calculate the induction factor a, the power coefficient Cp and the total power P from the turbine. The results show a turbine power coefficient of 33% to 37.5% with an induction factors between 0.10 and 0.12.

Performance enhancement of Savonius wind turbine by blade shape and twisted angle modifications

2021 ◽  
pp. 095765092098794
Author(s):  
Ahmed M Nagib Elmekawy ◽  
Hassan A Hassan Saeed ◽  
Sadek Z Kassab
Keyword(s):  
Wind Turbine ◽  
Performance Enhancement ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Vertical Axis ◽  
Cfd Simulations ◽  
Sliding Mesh ◽  
Blade Shape ◽  
Rotor Shape ◽  
Twisting Angle

Three-dimensional CFD simulations are carried out to study the increase of power generated from Savonius vertical axis wind turbines by modifying the blade shape and blade angel of twist. Twisting angle of the classical blade are varied and several proposed novel blade shapes are introduced to enhance the performance of the wind turbine. CFD simulations have been performed using sliding mesh technique of ANSYS software. Four turbulence models; realizable k -[Formula: see text], standard k - [Formula: see text], SST transition and SST k -[Formula: see text] are utilized in the simulations. The blade twisting angle has been modified for the proposed dimensions and wind speed. The introduced novel blade increased the power generated compared to the classical shapes. The two proposed novel blades achieved better power coefficients. One of the proposed models achieved an increase of 31% and the other one achieved 32.2% when compared to the classical rotor shape. The optimum twist angel for the two proposed models achieved 5.66% and 5.69% when compared with zero angle of twist.

Sign in / Sign up

Export Citation Format

Share Document