scholarly journals Changes in Beta-Carotene, Ascorbic Acid and Sensory Properties in Fermented, Solar-Dried and Stored Cowpea Leaf Vegetables

Author(s):  
Charity N. Muchoki ◽  
◽  
Jasper K. Imungi ◽  
Peter O.L

This study was conducted to determine the effect of fermentation, solar drying and packaging on the nutritional, sensory and keeping properties of cowpea leaf vegetables. The cowpea leaves were purchased from the local markets, sorted to remove the blemished, leaves and foreign materials, washed in running tap water then drained. The vegetables were divided into three batches of 16kg. One batch was heat treated in hot water for 3 minutes then cooled to ambient temperatures, drained and solar-dried. The second portion was acidified to a pH of 3.8, heat-treated, and then solar dried. The third portion was fermented for 21 days, heat-treated, and then solar dried. The three batches of vegetables were spread at different times on drying trays at the rate of 4kg/m2 and dried in a solar drier to approximate moisture content of 10%. The dried vegetables were packaged in either polyethylene bags or Kraft company paper bags and stored for three months at 18o C, 22o - 26o C or 32o C. Fermentation, heat-treating and drying of vegetables retained substantial levels of the vitamins: beta-carotene 91% and ascorbic acid 15%. Storage of the dried vegetables led to loss in both vitamins. The retention of beta-carotene and ascorbic acid at the end of storage, were 23% - 52% and 4% - 7% respectively, depending on storage conditions. Samples stored at 32o C had the highest losses, while those stored at 18o C had the lowest in both vitamins. Samples stored in Kraft paper bags had the highest losses in both vitamins. The duration and temperature of storage and the packaging material did not have significant effect on the sensory attributes of the dried vegetables. Increased acceptability of the fermented-dried vegetables in rural communities would assist in alleviating micronutrient malnutrition, help in dealing with the issue of seasonality and increase food security especially during the dry season.

2019 ◽  
Vol 27 (2) ◽  
pp. 113-120
Author(s):  
Justyna I. Szwejda-Grzybowska ◽  
Anna Wrzodak ◽  
Maria Grzegorzewska ◽  
Marek Gajewski ◽  
Ryszard Kosson

AbstractThe aim of this study was to determine the influence of dipping in tap and hot water (53 or 55 °C) before storage and conditions during short-term storage: 4 days at 18–20 °C temperature or 7 days at 0 or 5 °C, on contents of total polyphenols, ascorbic acid, antiradical activity, and sensory quality of leaves of wild rocket (Diplotaxis tenuifolia L.). The highest sensory values, ascorbic acid contents, and antiradical activity were found in fresh leaves. Treatments with tap and hot water before storage reduced ascorbic acid contents and antiradical activity, as well as most sensory parameters regardless of storage conditions. The highest overall quality of wild rocket after storage for 4 days at 18–20 °C was found for leaves not dipped or dipped in tap water. Dipping of the wild rocket in the water at 53 or 55 °C for 3 or 5 s did not improve the overall quality of stored leaves compared with leaves not dipped or dipped in tap water.


Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  

Abstract AMPCO 940 is a precipitation-hardening copper-nickel-silicon-chromium alloy developed for resistance welding and other applications now using the 1% beryllium-copper alloys. The heat-treated alloy is capable of meeting the RWMA (Resistance Welder Manufacturers Association) Class 3 minimum requirements-95,000 psi tensile strength, 90 Rockwell B hardness and 45% IACS electrical conductivity. Potential applications include resistance welding tips, wheels and fixtures. A major use is in plastic injection molding. AMPCO-TRODE 940 is used for repair welding and overlays. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: CU-434. Producer or source: Ampco Metal Inc. Originally published as Ampcoloy 940, April 1982, revised March 1993.


Alloy Digest ◽  
1986 ◽  
Vol 35 (12) ◽  

Abstract UNS No. A03560 is a heat-treatable aluminum casting alloy. Normally it is used only when heat-treated (aged) strengths are required. It is recommended for high-strength, pressure-tight castings, intricate shapes and where good resistance to corrosion is needed. Its many applications include crank cases, gear cases, oil pans, airframe fittings and instrument housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-274. Producer or source: Various aluminum companies.


Alloy Digest ◽  
2020 ◽  
Vol 69 (9) ◽  

Abstract Schmelzmetall Hovadur CCZ is a heat-treatable, copper-chromium-zirconium alloy. In the solution heat-treated and artificially aged condition, this alloy exhibits high thermal and electrical conductivity along with high strength and a high softening temperature. Hovadur CCZ evolved from CuCr1 (CW105C), a precipitation-hardenable alloy first made in the 1930s for spot welding electrodes, for which strength and hardness at temperatures up to 500 °C (930 °F), as well as good electrical and thermal conductivity, are essential. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-912. Producer or source: Schmelzmetall AG.


Alloy Digest ◽  
1974 ◽  
Vol 23 (12) ◽  

Abstract FEDERATED F401.5Ni is a heat-treatable aluminum casting alloy with high strength and good wear resistance in the fully heat-treated condition. It is recommended for castings requiring good strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-212. Producer or source: Federated Metals Corporation, ASARCO Inc..


Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  

Abstract UNS NO. A96101 in the heat treated condition is used primarily for enclosed bus conductor where both high strength and high electrical conductivity are desirable. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-287. Producer or source: Various aluminum companies.


Alloy Digest ◽  
1988 ◽  
Vol 37 (1) ◽  

Abstract UNS No. A02080 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-286. Producer or source: Various aluminum companies.


Alloy Digest ◽  
1968 ◽  
Vol 17 (12) ◽  

Abstract Brush Alloy 190 is a mill-heat treated beryllium copper strip with a tensile strength up to 190,000 psi. It eliminates the need of customer heat-treating by providing high properties combined with exceptional formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-194. Producer or source: Brush Beryllium Company.


Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  

Abstract Crucible CSM #2 is an alloy tool steel recommended for die casting dies and plastic molds. It is usually heat treated to two hardness levels, either 200 Brinell or 300 Brinell. CSM #2 machines readily and polishes easily at both hardness levels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-210. Producer or source: Crucible Steel Company of America.


Alloy Digest ◽  
2002 ◽  
Vol 51 (8) ◽  

Abstract Carpenter titanium alloy 6Al-4V is an alpha-beta alloy that contains alpha and beta stabilizers and can be heat treated. This alloy accounts for more than 50% of total titanium usage, mostly in aerospace applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: TI-60. Producer or source: Carpenter Technology Corporation. Originally published as Carpenter Titanium 6-4, October 1970, revised August 2002.


Sign in / Sign up

Export Citation Format

Share Document