scholarly journals Effective Removal of Toxic Methylene Blue Dye from Textile Industry Wastewater using Graphene Oxide- Silica [GO-Si] Nano Composite Adsorbent

2020 ◽  
Vol 13 (1) ◽  
pp. 98-106
Author(s):  
Jayakaran Pachiyappan ◽  
Nirmala Gnanasundaram ◽  
Govindarajan Lakshmana Rao
Keyword(s):  
Methylene Blue ◽  
Graphene Oxide ◽  
Textile Industry ◽  
Well Being ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Isotherm Study ◽  
Effective Removal ◽  
Pseudo Second Order ◽  
Industry Wastewater

Textile companies release wastewater containing lots of colors including Methylene Blue (MB) dye. Those colors are harrmful for human well being. Various procedures have been utilized to expel the color from industrial wastewater. Out of different methods used in practice, adsorption was observed to be exceptionally successful and effective. The reason behind the especiality is when nanocomposites are utilized as an adsorbent, as it has a better adsorption limit, selectivity, and solidness than nanoparticles. In this research, a peculiar synthesis of adsorbent Graphene Oxide Silica [GO-Si] is carried out and it is used to remove methylene blue dye from texile industry wastewater. Analysing the performance of MB dye removal from the waste water using this adsorbent seems to be more effective. Various studies have been carried out for successful analysis of the performance such as adsorption isotherm study, Freundlich and Langmuir analysis. In addition the adsorption process was well explained by a pseudo-second-order kinetics models.

Zinc oxide incorporated carbon nanotubes or graphene oxide nanohybrids for enhanced sonophotocatalytic degradation of methylene blue dye

2019 ◽  
Vol 487 ◽  
pp. 539-549 ◽  
Author(s):  
Mohamed Mokhtar Mohamed ◽  
Mohamed A. Ghanem ◽  
Mohamed Khairy ◽  
Eman Naguib ◽  
Nouf H. Alotaibi
Keyword(s):  
Carbon Nanotubes ◽  
Methylene Blue ◽  
Zinc Oxide ◽  
Graphene Oxide ◽  
Blue Dye ◽  
Methylene Blue Dye

Removal of Methylene Blue Dye by Using Eggshell Powder

2013 ◽  
Vol 65 (1) ◽  
Author(s):  
Norzita Ngadi ◽  
Chin Chiek Ee ◽  
Nor Aida Yusoff
Keyword(s):  
Methylene Blue ◽  
Textile Industry ◽  
Low Cost ◽  
Kinetic Studies ◽  
Operating Conditions ◽  
Blue Dye ◽  
Dye Wastewater ◽  
Order Model ◽  
Aquatic Life ◽  
Pseudo Second Order

Dyes contain carcinogenic materials which can cause serious hazards to aquatic life and the users of water. Textile industry is the main source of dye wastewater which results in environmental pollution. Many studies have been conducted to investigate the use of low cost adsorbent as an alternative technique for the adsorption of dye. The objective of this study is to determine the potential of eggshell powder as an adsorbent for methylene blue removal and find out the best operating conditions for the color adsorption at laboratory scale. The adsorption of cationic methylene blue from aqueous solution onto the eggshell powder was carried out by varying the operating parameters which were contact time, pH, dosage of eggshell powder and temperature in order to study their effect in adsorption capacity of eggshell powder. The results obtained showed that the best operating condition for removal of methylene blue was at pH 10 (78.98 %) and temperature 50°C (47.37 %) by using 2 g of eggshell powder (57.03 %) with 30 minutes equilibrium time (41.36 %). The kinetic studies indicated that pseudo-second-order model best described the adsorption process.

Synthesis of Adsorbent from Bagasse for Methylene Blue Adsorption

2021 ◽  
Vol 7 (2) ◽  
pp. 188-195
Author(s):  
Nurhasni Nurhasni ◽  
Sariana Harahap ◽  
Ahmad Fathoni ◽  
Hendrawati Hendrawati
Keyword(s):  
Methylene Blue ◽  
Textile Industry ◽  
Contact Time ◽  
Ph Effect ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Batch Method ◽  
Homogeneous Surface ◽  
Dyeing Process ◽  
Ft Ir

The ability of bagasse adsorbents to adsorb methylene blue without activation using 0.5 M H2SO4 solution was examined. Methylene blue is widely used in the textile industry because it produces bright colors, and the dyeing process is fast and easy. This research aims to determine the optimum adsorption conditions, namely the variations in contact time, dye concentration, adsorbent mass, and pH effect on methylene blue, which were carried out using the batch method. Furthermore, the adsorbents were characterized by FT-IR and SEM. The optimum state of the bagasse adsorbent to adsorb methylene blue dye has a mass of 0.5 grams, a contact time of 30 minutes, a concentration of 50 ppm, and a pH of 5. The character of the adsorbent after activation with H2SO4 was better than without activation. The highest adsorption efficiency of methylene blue dye in the batch method was 99.67%. The FTIR spectrum of the bagasse adsorbent showed OH, C-H, C=O, C=C, and C-O functional groups. The adsorption isotherm model for methylene blue dye follows the Langmuir isotherm since the graph obtained is linear with the correlation coefficient (R2) = 1, where the adsorbent has a homogeneous surface.

Preparation, characterization and adsorption kinetics of methylene blue dye in reduced-graphene oxide supported nanoadsorbents

2020 ◽  
Vol 309 ◽  
pp. 113171 ◽  
Author(s):  
Mehmet Harbi Calimli ◽  
Mehmet Salih Nas ◽  
Hakan Burhan ◽  
Sibel Demiroglu Mustafov ◽  
Özkan Demirbas ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Adsorption Kinetics ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Reduced Graphene ◽  
Kinetics Of

scholarly journals Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2295 ◽  
Author(s):  
Souad Rakass ◽  
Hicham Oudghiri Hassani ◽  
Mostafa Abboudi ◽  
Fethi Kooli ◽  
Ahmed Mohmoud ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Molybdenum Trioxide ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Removal Capacity ◽  
Pseudo Second Order

Nano Molybdenum trioxide (α-MoO3) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO3 nanoparticles after adsorption and regeneration. The α-MoO3 nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

Sign in / Sign up

Export Citation Format

Share Document