scholarly journals On a Long Term Strategy for the Success of Nuclear Power

Author(s):  
Bruno Merk ◽  
Dzianis Litskevich ◽  
Karl R. Whittle ◽  
Mark Bankhead ◽  
Richard Taylor ◽  
...  

The current generation of nuclear reactors are evolutionary in design, mostly based on the technology originally designed to power submarines, and dominated by Light Water Reactors. The aims of the GenIV consortium are driven by sustainability, safety and reliability, economics, and proliferation resistance. The aims are extended here to encompass the ultimate and universal vision for strategic development of energy production, the ‘perpetuum mobile’ – at least as close as possible. We propose to rethink nuclear reactor design with the mission to develop a system which uses no fresh resources and produces no fresh waste during operation as well as generates power safe and reliably in economic way. The results of the innovative simulations presented here demonstrate that, from a theoretical perspective, it is feasible to fulfil the mission through the reuse of spent nuclear fuel from currently operating reactors as the fuel for a new reactor. The produced waste is less burdensome than current spent nuclear fuel which is used as feed to the system. However, safety, reliability and operational economics will need to be demonstrated to create the basis for the long term success of nuclear reactors as a major carbon free, sustainable, and applied highly reliable energy source.

MRS Advances ◽  
2016 ◽  
Vol 1 (61) ◽  
pp. 4075-4080
Author(s):  
Fredrik Vahlund

ABSTRACTSince 1988 the Swedish Nuclear Fuel and Waste Management Co. operates a repository for low- and intermediate-level short-lived radioactive waste, SFR, in Forsmark, Sweden. Due to decommissioning of the nuclear power plants additional storage capacity is needed. In December 2014, an application to extend the repository was therefore submitted. One key component of this application was an assessment of post-closure safety of the extended SFR. For this safety assessment, a methodology based on that developed by SKB for the spent nuclear fuel repository was used and the impact of the degradation of repository components, the evolution of the surface system and changes of future climate on the radiological safety of the repository was assessed over a period of 100,000 years. The central conclusion of the SR-PSU safety assessment is that the extended SFR repository meets requirements on protection of human health and of the environment that have been established by the Swedish radiation safety authority for the final disposal of radioactive waste. Furthermore, the design of the repository was shown suitable for the waste selected and the applied methodology suitable for the safety assessment.


Radiocarbon ◽  
1986 ◽  
Vol 28 (2A) ◽  
pp. 668-672 ◽  
Author(s):  
Pavel Povinec ◽  
Martin Chudý ◽  
Alexander Šivo

14C is one of the most important anthropogenic radionuclides released to the environment by human activities. Weapon testing raised the 14C concentration in the atmosphere and biosphere to +100% above the natural level. This excess of atmospheric C at present decreases with a half-life of ca 7 years. Recently, a new source of artificially produced 14C in nuclear reactors has become important. Since 1967, the Bratislava 14C laboratory has been measuring 14C in atmospheric 14CO2 and in a variety of biospheric samples in densely populated areas and in areas close to nuclear power plants. We have been able to identify a heavy-water reactor and the pressurized water reactors as sources of anthropogenic 14C. 14C concentrations show typical seasonal variations. These data are supported by measurements of 3H and 85Kr in the same locations. Results of calculations of future levels of anthropogenic 14C in the environment due to increasing nuclear reactor installations are presented.


Author(s):  
Michael F. Keller

The world possess hundreds of years of economical coal reserves that are becoming increasingly unpopular due to climate-change concerns. The ability of renewable energy to supply the planet’s needs is limited. The once bright promise of American nuclear power has dimmed considerably due to the high cost of building new facilities, with the recent events in Japan creating even more uncertainties. Small nuclear reactors are now being proposed, but their limited size creates problematic competitiveness issues. Our energy options for the future are becoming progressively more limited. A completely unexpected solution lies with a hybrid gas turbine designed to cleanly produce large amounts of electrical power using two fuel sources. This recently proposed and unique U.S. technology employs a large combustion (gas) turbine in tandem with a small and efficient helium gas reactor. Relative to conventional methods, the hybrid greatly increases energy production, appreciably reduces costs while dramatically reducing emissions and solid wastes, particularly spent nuclear fuel which is also essentially worthless as bomb material. The commercial potential of the hybrid is unprecedented. The helium gas reactor marriage with the combustion turbine opens the door for the continued use of one of the worlds’ most abundant and low-cost fuel resources, coal. The hybrid-nuclear coal gasification configuration dramatically reduces environmental impacts while also supporting the co-production of all manner of liquid transportation fuels, substitute natural gas, hydrogen, process heat and industrial chemicals. Replacement of the aging fleet of US coal plants with hybrid-nuclear/coal gasification units would dramatically reduce air pollutants and greenhouse gas emissions without resorting to the problematic sequestration (pumping into the ground) of CO2. Further, coal sludge waste and ponds would be eliminated. The unique characteristics of the hybrid also sustain the co-production of stored energy (compressed air) and solar power and move both of these expensive green resources into more competitive positions. The hybrid’s unique operational capabilities readily support the electrical grid, particularly the increasing variability caused by greater use of renewable energy. The use of hybrid-nuclear energy plants would significantly extend the life of the world’s fuel resources, to the benefit of future generations. The hybrid relies on tried-and-proven technologies as well as the large body of knowledge developed over the 50 year history of nuclear reactors and combustion turbines. The unique characteristics of the hybrid overcome the engineering, financial and regulatory obstacles that have long held back the full-scale commercial deployment of the gas reactor. The hybrid technology is considerably safer than current reactors. Melting of the nuclear fuel is not possible, the reactor can not cause explosions or burnup, and radiation releases to the environment are extremely unlikely. No operator actions are necessary to keep the public safe. Hybrid nuclear energy is a fail-safe and evolutionary new direction for nuclear power.


2012 ◽  
Vol 2012 ◽  
pp. 1-13 ◽  
Author(s):  
Mats Jonsson

Safe long-term storage of radioactive waste from nuclear power plants is one of the main concerns for the nuclear industry as well as for governments in countries relying on electricity produced by nuclear power. A repository for spent nuclear fuel must be safe for extremely long time periods (at least 100 000 years). In order to ascertain the long-term safety of a repository, extensive safety analysis must be performed. One of the critical issues in a safety analysis is the long-term integrity of the barrier materials used in the repository. Ionizing radiation from the spent nuclear constitutes one of the many parameters that need to be accounted for. In this paper, the effects of ionizing radiation on the integrity of different materials used in a granitic deep geological repository for spent nuclear fuel designed according to the Swedish KBS-3 model are discussed. The discussion is primarily focused on radiation-induced processes at the interface between groundwater and solid materials. The materials that are discussed are the spent nuclear fuel (based on UO2), the copper-covered iron canister, and bentonite clay. The latter two constitute the engineered barriers of the repository.


2020 ◽  
pp. 62-71
Author(s):  
M. Sapon ◽  
O. Gorbachenko ◽  
S. Kondratyev ◽  
V. Krytskyy ◽  
V. Mayatsky ◽  
...  

According to regulatory requirements, when carrying out handling operations with spent nuclear fuel (SNF), prevention of damage to the spent fuel assemblies (SFA) and especially fuel elements shall be ensured. For this purpose, it is necessary to exclude the risk of SFA falling, SFA uncontrolled displacements, prevent mechanical influences on SFA, at which their damage is possible. Special requirements for handling equipment (in particular, cranes) to exclude these dangerous events, the requirements for equipment strength, resistance to external impacts, reliability, equipment design solutions, manufacturing quality are analyzed in this work. The requirements of Ukrainian and U.S. regulatory documents also are considered. The implementation of these requirements is considered on the example of handling equipment, in particular, spent nuclear fuel storage facilities. This issue is important in view of creation of new SNF storage facilities in Ukraine. These facilities include the storage facility (SFSF) for SNF from water moderated power reactors (WWER): a Сentralized SFSF for storing SNF of Rivne, Khmelnitsky and South-Ukraine Nuclear Power Plants (СSFSF), and SFSF for SNF from high-power channel reactors (RBMK): a dry type SFSF at Chornobyl nuclear power plant (ISF-2). After commissioning of these storage facilities, all spent nuclear fuel from Ukrainian nuclear power plants will be placed for long-term “dry” storage. The safety of handling operations with SNF during its preparation for long-term storage is an important factor.


Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3094
Author(s):  
Mikołaj Oettingen

The paper presents the methodology for the estimation of the long-term actinides radiotoxicity and isotopic composition of spent nuclear fuel from a fleet of Pressurized Water Reactors (PWR). The methodology was developed using three independent numerical tools: the Spent Fuel Isotopic Composition database, the Nuclear Fuel Cycle Simulation System and the Monte Carlo Continuous Energy Burnup Code. The validation of spent fuel isotopic compositions obtained in the numerical modeling was performed using the available experimental data. A nuclear power embarking country benchmark was implemented for the verification and testing of the methodology. The obtained radiotoxicity reaches the reference levels at about 1.3 × 105 years, which is common for the PWR spent nuclear fuel. The presented methodology may be incorporated into a more versatile numerical tool for the modeling of hybrid energy systems.


2020 ◽  
Vol 18 (10) ◽  
pp. 1807-1816
Author(s):  
Claudir Jose Nodari ◽  
Pedro Luiz da Cruz Saladanha ◽  
Gladson Silva Fontes

2021 ◽  
Vol 1 ◽  
pp. 237-238
Author(s):  
Michel Herm ◽  
Elke Bohnert ◽  
Luis Iglesias Pérez ◽  
Tobias König ◽  
Volker Metz ◽  
...  

Abstract. Disposal of spent nuclear fuel (SNF) in deep geological repositories is considered a preferential option for the management of such wastes in many countries with nuclear power plants. With the aim to permanently and safely isolate the radionuclide inventory from the biosphere for a sufficient time, a multibarrier system consisting of technical, geotechnical and geological barriers is interposed between the emplaced waste and the environment. In safety assessments for deep underground repositories, access of water, followed by failure of canisters and finally loss of the cladding integrity is considered in the long-term. Hence, evaluating the performance of SNF in deep geological disposal systems requires process understanding of SNF dissolution and rates as well as quantification of radionuclides release from SNF under reducing conditions of a breached container. In order to derive a radionuclide source term, the SNF dissolution and alteration processes can be assigned to two steps: (i) instantaneous release of radionuclides upon cladding failure from gap and grain boundaries and (ii) a long-term release that results from dissolution of the fuel grains itself (Ewing, 2015). In this context, research at KIT-INE has focused for more than 20 years on the behavior of SNF (irradiated UO2 and MOX fuels) under geochemical conditions (pH, redox and ionic strength) representative of various repository concepts, including the interaction of SNF with backfill material, such as bentonite as well as the influence of iron corrosion products, e.g. magnetite and radiolytic reactions on SNF dissolution mechanisms. Since 2001, KIT-INE has contributed with experimental and theoretical studies on the behavior of SNF under repository relevant conditions to six Euratom projects viz SFS (2001–2004), NF-PRO (2004–2006), MICADO (2006–2009), RECOSY (2007–2011), FIRST-Nuclides (2012–2014) and DISCO (2016–2021). Moreover, since 2007, overall 4 consecutive projects for the Belgian waste management organization, ONDRAF-NIRAS, were performed on the behavior of SNF under conditions representative of the Belgian “Supercontainer” concept. In this contribution, we summarize major achievements of theses research projects to understand and quantify the radionuclide release from dissolving SNF under repository conditions. In particular, the dependence of radionuclide release on the chemical composition of the aqueous and gaseous phase in the proximity of repositories in different types of host rock is discussed.


Sign in / Sign up

Export Citation Format

Share Document