scholarly journals Construction and Experimental Study of a 3-Dof Haptic Master for Interactive Operation

2017 ◽  
Author(s):  
Huijun Li ◽  
Aiguo Song ◽  
Baoguo Xu ◽  
Bowei Li ◽  
Hong Zeng ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Force Feedback ◽  
Haptic Feedback ◽  
Mechanical Design ◽  
Influencing Factor ◽  
Interactive System ◽  
Guidance Force ◽  
Interactive Operation ◽  
Command Signals ◽  
Perpendicular Axis

This paper presents a novel 3-degrees-of-freedom (3-DOF) haptic master with rubber bands for self-resetting. The mechanical design avoids coupling between three directions mechanically by using three perpendicular axis intersecting at one point. Bevel gear transmission is adopted to increase the compactness of the overall structure. VR-based interactive system is designed and built by incorporating the proposed haptic master. The proposed haptic device can generate force feedback along 3-degree-of-freedom motion using motors and provide command signals to the avatar in the virtual environment. In order to analyze the performance of the developed device in terms of haptic feedback operation, ergonomics assessments are designed and experimentally implemented. Preliminary studies on the influencing factor including the guidance force, the reset force, the speed of the avatar and the arm the length have been conducted. The results of this paper are of great significance for the design of the haptic master and interactive system.

scholarly journals A 4-DOF Upper Limb Exoskeleton for Physical Assistance: Design, Modeling, Control and Performance Evaluation

2021 ◽  
Vol 11 (13) ◽  
pp. 5865
Author(s):  
Muhammad Ahsan Gull ◽  
Mikkel Thoegersen ◽  
Stefan Hein Bengtson ◽  
Mostafa Mohammadi ◽  
Lotte N. S. Andreasen Struijk ◽  
...  
Keyword(s):  
Upper Limb ◽  
Tracking Control ◽  
Degrees Of Freedom ◽  
Control Method ◽  
Mechanical Design ◽  
Trajectory Tracking Control ◽  
Upper Limb Exoskeleton ◽  
And Performance ◽  
Physically Disabled People ◽  
Human Upper Limb

Wheelchair mounted upper limb exoskeletons offer an alternative way to support disabled individuals in their activities of daily living (ADL). Key challenges in exoskeleton technology include innovative mechanical design and implementation of a control method that can assure a safe and comfortable interaction between the human upper limb and exoskeleton. In this article, we present a mechanical design of a four degrees of freedom (DOF) wheelchair mounted upper limb exoskeleton. The design takes advantage of non-backdrivable mechanism that can hold the output position without energy consumption and provide assistance to the completely paralyzed users. Moreover, a PD-based trajectory tracking control is implemented to enhance the performance of human exoskeleton system for two different tasks. Preliminary results are provided to show the effectiveness and reliability of using the proposed design for physically disabled people.

Kinematic Analysis and Optimization of a Novel Robot for Surgical Tool Manipulation

2008 ◽  
Author(s):  
Xiaoli Zhang ◽  
Carl A. Nelson
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Force Feedback ◽  
Robotic Systems ◽  
Small Space ◽  
Surgical Robots ◽  
Tool Positioning ◽  
Rotation Axes ◽  
Surgical Tool ◽  
Linear Nature

The size and limited dexterity of current surgical robotic systems are factors which limit their usefulness. To improve the level of assimilation of surgical robots in minimally invasive surgery (MIS), a compact, lightweight surgical robotic positioning mechanism with four degrees of freedom (DOF) (three rotational DOF and one translation DOF) is proposed in this paper. This spatial mechanism based on a bevel-gear wrist is remotely driven with three rotation axes intersecting at a remote rotation center (the MIS entry port). Forward and inverse kinematics are derived, and these are used for optimizing the mechanism structure given workspace requirements. By evaluating different spherical geared configurations with various link angles and pitch angles, an optimal design is achieved which performs surgical tool positioning throughout the desired kinematic workspace while occupying a small space bounded by a hemisphere of radius 13.7 cm. This optimized workspace conservatively accounts for collision avoidance between patient and robot or internally between the robot links. This resultant mechanism is highly compact and yet has the dexterity to cover the extended workspace typically required in telesurgery. It can also be used for tool tracking and skills assessment. Due to the linear nature of the gearing relationships, it may also be well suited for implementing force feedback for telesurgery.

Design of a Novel Parallel Mechanism for Haptic Device

2021 ◽  
pp. 1-63
Author(s):  
Jin Lixing ◽  
Duan Xingguang ◽  
Li Changsheng ◽  
Shi Qingxin ◽  
Wen Hao ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Force Feedback ◽  
Parallel Architecture ◽  
General Purpose ◽  
Haptic Device ◽  
Haptic Devices ◽  
Modeling And Optimization ◽  
Teleoperation Systems

Abstract This paper presents a novel parallel architecture with seven active degrees of freedom (DOFs) for general-purpose haptic devices. The prime features of the proposed mechanism are partial decoupling, large dexterous working area, and fixed actuators. The detailed processes of design, modeling, and optimization are introduced and the performance is simulated. After that, a mechanical prototype is fabricated and tested. Results of the simulations and experiments reveal that the proposed mechanism possesses excellent performances on motion flexibility and force feedback. This paper aims to provide a remarkable solution of the general-purpose haptic device for teleoperation systems with uncertain mission in complex applications.

Radiation-tolerant robotic complex URS-2

2021 ◽  
Vol 9 (2) ◽  
pp. 142-150
Author(s):  
Ivan Guschin ◽  
Anton Leschinskiy ◽  
Andrey Zhukov ◽  
Alexander Zarukin ◽  
Vyacheslav Kiryukhin ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Force Feedback ◽  
Control Device ◽  
Control Panel ◽  
Original Design ◽  
Innovative Methods ◽  
Control Computer ◽  
Robotic Arm Control ◽  
6 Degrees Of Freedom ◽  
Radiation Tolerant

The results of the development of a radiation-tolerant robotic complex URS-2 for operation in hot cells at nuclear enterprises are presented. The robotic complex consists of several original components: robotic arm, control device with force feedback, control panel with hardware buttons and touch screen, control computer with system and application software, control-and-power cabinet. The robotic manipulator has 6 degrees of freedom, replaceable pneumatic grippers and is characterized by high radiation tolerance, similar to that of mechanical master-slave manipulators. The original design of the control device based on the delta-robot model that implements a copying mode of manual control of the robotic complex with force feedback is presented. The hardware and software solutions developed has made it possible to create a virtual simulator of the RTC for testing innovative methods of remote control of the robot, as well as teaching operators to perform technological tasks in hot cells. The experimental model of the robotic complex has demonstrated the ability to perform basic technological tasks in a demo hot cell, both in manual and automatic modes.

A Parallely Actuated Work Support Module for Reconfigurable Machining Systems

1998 ◽  
Author(s):  
Venkat Gopalakrishnan ◽  
Sridhar Kota
Keyword(s):  
Machine Tool ◽  
Machine Tools ◽  
Degrees Of Freedom ◽  
Mechanical Design ◽  
Performance Criteria ◽  
Machining Accuracy ◽  
Parallel Mechanisms ◽  
Element Analysis ◽  
Work Support ◽  
Reconfigurable Machining

Abstract In order to respond quickly to changes in market demands and the resulting product design changes, machine tool manufacturers must reduce the machine tool design lead time and machine set-up time. Reconfigurable Machine Tools (RMTs), assembled from machine modules such as spindles, slides and worktables are designed to be easily reconfigured to accommodate new machining requirements. The essential characteristics of RMTs are modularity, flexibility, convertibility and cost effectiveness. The goal of Reconfigurable Machining Systems (RMSs), composed of RMTs and other types of machines, is to provide exactly the capacity and functionality, exactly when needed. The scope of RMSs design includes mechanical hardware, control systems, process planning and tooling. One of the key challenges in the mechanical design of reconfigurable machine tools is to achieve the desired machining accuracy in all intended machine configurations. To meet this challenge we propose (a) to distribute the total number of degrees of freedom between the work-support and the tool and (b) employ parallely-actuated mechanisms for stiffness and ease of reconfigurability. In this paper we present a novel parallely-actuated work-support module as a part of an RMT. Following a brief summary of a few parallel mechanisms used in machine tool applications, this paper presents a three-degree-of-freedom work-support module designed to meet the machining requirements of specific features on a family of automotive cylinder heads. Inverse kinematics, dynamic and finite element analysis are performed to verify the performance criteria such as workspace envelope and rigidity. A prototype of the proposed module is also presented.

Development and Testing of a Telemanipulation System With Arm and Hand Motion

2000 ◽  
Author(s):  
Michael L. Turner ◽  
Ryan P. Findley ◽  
Weston B. Griffin ◽  
Mark R. Cutkosky ◽  
Daniel H. Gomez
Keyword(s):  
Force Feedback ◽  
Haptic Feedback ◽  
Industrial Robot ◽  
Robot Hand ◽  
Robot Arm ◽  
Task Execution ◽  
Hand Motion ◽  
Instrumented Glove ◽  
Simple Manipulation ◽  
Dexterous Robot Hand

Abstract This paper describes the development of a system for dexterous telemanipulation and presents the results of tests involving simple manipulation tasks. The user wears an instrumented glove augmented with an arm-grounded haptic feedback apparatus. A linkage attached to the user’s wrist measures gross motions of the arm. The movements of the user are transferred to a two fingered dexterous robot hand mounted on the end of a 4-DOF industrial robot arm. Forces measured at the robot fingers can be transmitted back to the user via the haptic feedback apparatus. The results obtained in block-stacking and object-rolling experiments indicate that the addition of force feedback to the user did not improve the speed of task execution. In fact, in some cases the presence of incomplete force information is detrimental to performance speed compared to no force information. There are indications that the presence of force feedback did aid in task learning.

Semi-Immersive Virtual Turbine Engine Simulation System

2018 ◽  
Vol 35 (2) ◽  
pp. 149-160 ◽  
Author(s):  
Mustufa H. Abidi ◽  
Abdulrahman M. Al-Ahmari ◽  
Ali Ahmad ◽  
Saber Darmoul ◽  
Wadea Ameen
Keyword(s):  
Virtual Reality ◽  
Force Feedback ◽  
Haptic Feedback ◽  
Design System ◽  
Detection Mechanism ◽  
Turbine Engine ◽  
Surround Sound ◽  
Process Verification ◽  
Engine Simulation ◽  
Assembly Operations

AbstractThe design and verification of assembly operations is essential for planning product production operations. Recently, virtual prototyping has witnessed tremendous progress, and has reached a stage where current environments enable rich and multi-modal interaction between designers and models through stereoscopic visuals, surround sound, and haptic feedback. The benefits of building and using Virtual Reality (VR) models in assembly process verification are discussed in this paper. In this paper, we present the virtual assembly (VA) of an aircraft turbine engine. The assembly parts and sequences are explained using a virtual reality design system. The system enables stereoscopic visuals, surround sounds, and ample and intuitive interaction with developed models. A special software architecture is suggested to describe the assembly parts and assembly sequence in VR. A collision detection mechanism is employed that provides visual feedback to check the interference between components. The system is tested for virtual prototype and assembly sequencing of a turbine engine. We show that the developed system is comprehensive in terms of VR feedback mechanisms, which include visual, auditory, tactile, as well as force feedback. The system is shown to be effective and efficient for validating the design of assembly, part design, and operations planning.

Torque Control of Electrorheological Fluidic Resistive Actuators for Haptic Vehicular Instrument Controls

2005 ◽  
Vol 128 (2) ◽  
pp. 216-226 ◽  
Author(s):  
M. A. Vitrani ◽  
J. Nikitczuk ◽  
G. Morel ◽  
C. Mavroidis ◽  
B. Weinberg
Keyword(s):  
Electric Fields ◽  
Closed Loop ◽  
Force Feedback ◽  
Haptic Feedback ◽  
Control Device ◽  
Torque Control ◽  
Feedback Mechanisms ◽  
Feedforward Loop ◽  
Integral Controller ◽  
Proportional Integral Controller

Force-feedback mechanisms have been designed to simplify and enhance the human-vehicle interface. The increase in secondary controls within vehicle cockpits has created a desire for a simpler, more efficient human-vehicle interface. By consolidating various controls into a single, haptic feedback control device, information can be transmitted to the operator, without requiring the driver’s visual attention. In this paper, the experimental closed loop torque control of electro-rheological fluids (ERF) based resistive actuators for haptic applications is performed. ERFs are liquids that respond mechanically to electric fields by changing their properties, such as viscosity and shear stress electroactively. Using the electrically controlled rheological properties of ERFs, we developed resistive-actuators for haptic devices that can resist human operator forces in a controlled and tunable fashion. In this study, the ERF resistive-actuator analytical model is derived and experimentally verified and accurate closed loop torque control is experimentally achieved using a non-linear proportional integral controller with a feedforward loop.

Mechanical Manipulator for Intuitive Control of Endoscopic Instruments With Seven Degrees of Freedom

2004 ◽  
Author(s):  
J. E. N. Jaspers ◽  
M. Shehata ◽  
F. Wijkhuizen ◽  
J. L. Herder ◽  
C. A. Grimbergen
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Degrees Of Freedom ◽  
Force Feedback ◽  
Robotic Systems ◽  
Complex Tasks ◽  
Steel Wires

Performing complex tasks in Minimally Invasive Surgery (MIS) is demanding due to a disturbed hand-eye co-ordination, the use of non-ergonomic instruments with limited degrees of freedom (DOFs) and a lack of force feedback. Robotic telemanipulatory systems enhance surgical dexterity by providing up to 7 DOFs. They allow the surgeon to operate in an ergonomically favorable position with more intuitive manipulation of the instruments. Commercially available robotic systems, however, are very bulky, expensive and do not provide any force feedback. The aim of our study was to develop a simple mechanical manipulator for MIS. When manipulating the handle of the device, the surgeon’s wrist and grasping movements are directly transmitted to the deflectable instrument tip in 7 DOFs. The manipulator consists of a parallelogram mechanism with steel wires. First phantom experience indicated that the system functions properly. The MIM provides some force feedback improving safety. A set of MIMs seems to be an economical and compact alternative for robotic systems.

Introducing a Projection-Based Method to Compare Three Approaches Computing the Accumulation of Geometric Variations

2018 ◽  
Author(s):  
Vincent Delos ◽  
Santiago Arroyave-Tobón ◽  
Denis Teissandier
Keyword(s):  
Degrees Of Freedom ◽  
Mechanical Design ◽  
Geometric Constraints ◽  
Computational Time ◽  
Manufacturing Defects ◽  
Design Tolerance ◽  
Polyhedral Objects ◽  
The Difference ◽  
Bounded Sets ◽  
Accumulation Of Defects

In mechanical design, tolerance zones and contact gaps can be represented by sets of geometric constraints. For computing the accumulation of possible manufacturing defects, these sets have to be summed and/or intersected according to the assembly architecture. The advantage of this approach is its robustness for treating even over-constrained mechanisms i.e. mechanisms in which some degrees of freedom are suppressed in a redundant way. However, the sum of constraints, which must be computed when simulating the accumulation of defects in serial joints, is a very time-consuming operation. In this work, we compare three methods for summing sets of constraints using polyhedral objects. The difference between them lie in the way the degrees of freedom (DOFs) (or invariance) of joints and features are treated. The first method proposes to virtually limit the DOFs of the toleranced features and joints to turn the polyhedra into polytopes and avoid manipulating unbounded objects. Even though this approach enables to sum, it also introduces bounding or cap facets which increase the complexity of the operand sets. This complexity increases after each operation until becoming far too significant. The second method aims to face this problem by cleaning, after each sum, the calculated polytope to keep under control the effects of the propagation of the DOFs. The third method is new and based on the identification of the sub-space in which the projection of the operands are bounded sets. Calculating the sum in this sub-space allows reducing significantly the operands complexity and consequently the computational time. After presenting the geometric properties on which the approaches rely, we demonstrate them on an industrial case. Then we compare the computation times and deduce the equality of the results of all the methods.

Sign in / Sign up

Export Citation Format

Share Document