scholarly journals Ultrasonic Guided-Waves Sensors and Integrated Structural Health Monitoring Systems for Impact Detection and Localization: A Review

2021 ◽  
Author(s):  
Lorenzo Capineri ◽  
Andrea Bulletti
Keyword(s):  
Health Monitoring ◽  
Guided Waves ◽  
Ultrasonic Waves ◽  
Impact Detection ◽  
Advantages And Disadvantages ◽  
Recent Developments ◽  
Autonomous Nodes ◽  
The Many ◽  
Physical Phenomena ◽  
Detection And Localization

This review article is focused on the analysis of the state of the art of sensors for guided 9 ultrasonic waves for the detection and localization of impacts, therefore of interest for the structural 10 health monitoring (SHM). The recent developments in sensor technologies are then reported and 11 discussed through the many references in recent scientific literature. The physical phenomena re-12 lated to impact event and the main physical quantities are then introduced to discuss their im-13 portance in the development of the hardware and software components for SHM systems. An im-14 portant aspect of the article is the description of the different ultrasonic sensor technologies cur-15 rently present in the literature and what advantages and disadvantages they could bring, in relation 16 to the various phenomena investigated. In this context, the analysis of the front-end electronics is 17 deepened, the type of data transmission both in terms of wired and wireless technology and in terms 18 of online and offline signal processing. The integration aspects of sensors for the creation of net-19 works with autonomous nodes with the possibility of powering through energy harvesting devices 20 and the embedded processing capacity is also studied. Finally, the emerging sector of processing 21 techniques using deep learning and artificial intelligence concludes the review by indicating the 22 potential for the detection and autonomous characterization of the impacts.

scholarly journals Ultrasonic Guided-Waves Sensors and Integrated Structural Health Monitoring Systems for Impact Detection and Localization: A Review

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 2929
Author(s):  
Lorenzo Capineri ◽  
Andrea Bulletti
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Guided Waves ◽  
Ultrasonic Waves ◽  
Structural Health ◽  
Advantages And Disadvantages ◽  
Recent Developments ◽  
Autonomous Nodes ◽  
The Many ◽  
Detection And Localization

This review article is focused on the analysis of the state of the art of sensors for guided ultrasonic waves for the detection and localization of impacts for structural health monitoring (SHM). The recent developments in sensor technologies are then reported and discussed through the many references in recent scientific literature. The physical phenomena that are related to impact event and the related main physical quantities are then introduced to discuss their importance in the development of the hardware and software components for SHM systems. An important aspect of the article is the description of the different ultrasonic sensor technologies that are currently present in the literature and what advantages and disadvantages they could bring in relation to the various phenomena investigated. In this context, the analysis of the front-end electronics is deepened, the type of data transmission both in terms of wired and wireless technology and of online and offline signal processing. The integration aspects of sensors for the creation of networks with autonomous nodes with the possibility of powering through energy harvesting devices and the embedded processing capacity is also studied. Finally, the emerging sector of processing techniques using deep learning and artificial intelligence concludes the review by indicating the potential for the detection and autonomous characterization of the impacts.

scholarly journals Experimentation and Adaptive Modeling for Temperature Effect Quantification in PVP Structural Health Monitoring With PWAS

2015 ◽  
Author(s):  
Tuncay Kamas ◽  
Banibrata Poddar ◽  
Bin Lin ◽  
Lingyu Yu ◽  
Victor Giurgiutiu
Keyword(s):  
Elevated Temperature ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Thermal Effects ◽  
Guided Waves ◽  
Substrate Material ◽  
Ultrasonic Waves ◽  
Material Parameters ◽  
Structural Health

The thermal effects at elevated temperatures mostly exist for pressure vessel and pipe (PVP) applications. The technologies for diagnosis and prognosis of PVP systems need to take the thermal effect into account and compensate it on sensing and monitoring of PVP structures. One of the extensively employed sensor technologies has been permanently installed piezoelectric wafer active sensor (PWAS) for in-situ continuous structural health monitoring (SHM). Using the transduction of ultrasonic elastic waves into voltage and vice versa, PWAS has been emerged as one of the major SHM sensing technologies. However, the dynamic characteristics of PWAS need to be explored prior its installation for in-situ SHM. Electro-mechanical impedance spectroscopy (EMIS) method has been utilized as a dynamic descriptor of PWAS and as a high frequency local modal sensing technique by applying standing waves to indicate the response of the PWAS resonator by determining the resonance and anti-resonance frequencies. Another SHM technology utilizing PWAS is guided wave propagation (GWP) as a far-field transient sensing technique by transducing the traveling guided ultrasonic waves (GUW) into substrate structure. The paper first presents EMIS method that qualifies and quantifies circular PWAS resonators under traction-free boundary condition and in an ambience with increasing temperature. The piezoelectric material degradation was investigated by introducing the temperature effects on the material parameters that are obtained from experimental observations as well as from related work in literature. GWP technique is also presented by inclusion of the thermal effects on the substrate material. The MATLAB GUI under the name of Wave Form Revealer (WFR) was adapted for prediction of the thermal effects on coupled guided waves and dynamic structural change in the substrate material at elevated temperature. The WFR software allows for the analysis of multimodal guided waves in the structure with affected material parameters in an ambience with elevated temperature.

Ultrasonic/Guided Waves for Structural Health Monitoring

2005 ◽  
Vol 293-294 ◽  
pp. 49-62 ◽  
Author(s):  
W.J. Staszewski
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Guided Waves ◽  
Ultrasonic Waves ◽  
Detection Methods ◽  
Smart Sensor ◽  
Large Structures ◽  
Guided Ultrasonic Waves ◽  
Damage Monitoring ◽  
Recent Developments

Structural damage detection and monitoring is one of the major maintenance activities in transportation, processing and civil engineering. Current procedures are based on scheduled inspections which are often time/labour consuming and expensive. Guided ultrasonic waves offer the ability of inspecting large structures with a small number of transducers. Recent developments in smart sensor technologies allow for integration of these transducers with monitored structures. This is associated with a new design philosophy leading to more efficient and economically attractive structures. The paper briefly discusses various damage detection methods based on structural, ultrasonic and guided ultrasonic waves. The focus is on recent research advances in damage monitoring techniques, smart sensor technologies and signal processing.

Structural Health Monitoring of Composite Scarf Repairs with Guided Waves

2012 ◽  
Vol 518 ◽  
pp. 328-337 ◽  
Author(s):  
Sofia Pavlopoulou ◽  
Costas Soutis ◽  
Wieslaw Jerzy Staszewski
Keyword(s):  
Health Monitoring ◽  
Guided Waves ◽  
Lamb Waves ◽  
Early Stage ◽  
Ultrasonic Waves ◽  
Image Correlation ◽  
Patch Repair ◽  
Original Structure ◽  
Damage Indices ◽  
Defect Recognition

The interest in composite repair technologies has been recently increased following the wide applications of composite materials in aerospace industry. Bonded patch repair technologies provide an alternative to mechanically fastened repairs with significantly higher performance. Scarf repairs offer great advantages compared to external patch repairs since they provide higher stiffness by matching ply to ply the original structure and by reducing stress discontinuities in the repaired region. Ultrasonic guided waves have been extensively used for the health monitoring of complex structures due to their remarkable ability of defect recognition. The authors have previously investigated the extraction of the instantaneous characteristics of Lamb waves for the monitoring of an aluminium repaired structure, highlighting the potential use of such waves in the inspection of repaired structures [1]. In the current study, the behaviour of a scarf repair was monitored with guided ultrasonic waves excited by low profile, surface bonded piezoceramic transducers under longitudinal tensile loading. Appropriate damage indices were extracted and the results were correlated with images taken through a 3-Dimensional Digital Image Correlation (3-D DIC) technique. The correlation of the extracted features with the early stage damage is performed and conclusions about the recovered strength through the scarf repair are deduced. Finally the study compares results obtained from the on-line analysis and from off-line techniques such as ultrasonic C-scanning and X-ray radiography.

scholarly journals Challenges in Bridge Health Monitoring: A Review

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4336
Author(s):  
Piervincenzo Rizzo ◽  
Alireza Enshaeian
Keyword(s):  
United States ◽  
Health Monitoring ◽  
Highway Bridges ◽  
The United States ◽  
Anomalous Behavior ◽  
Existing Structures ◽  
Bridge Health Monitoring ◽  
Using Data ◽  
The Many ◽  
Major Factors

Bridge health monitoring is increasingly relevant for the maintenance of existing structures or new structures with innovative concepts that require validation of design predictions. In the United States there are more than 600,000 highway bridges. Nearly half of them (46.4%) are rated as fair while about 1 out of 13 (7.6%) is rated in poor condition. As such, the United States is one of those countries in which bridge health monitoring systems are installed in order to complement conventional periodic nondestructive inspections. This paper reviews the challenges associated with bridge health monitoring related to the detection of specific bridge characteristics that may be indicators of anomalous behavior. The methods used to detect loss of stiffness, time-dependent and temperature-dependent deformations, fatigue, corrosion, and scour are discussed. Owing to the extent of the existing scientific literature, this review focuses on systems installed in U.S. bridges over the last 20 years. These are all major factors that contribute to long-term degradation of bridges. Issues related to wireless sensor drifts are discussed as well. The scope of the paper is to help newcomers, practitioners, and researchers at navigating the many methodologies that have been proposed and developed in order to identify damage using data collected from sensors installed in real structures.

Statistical Analysis of SHM Passive Sensing Systems

2015 ◽  
Vol 665 ◽  
pp. 241-244
Author(s):  
Marco Thiene ◽  
Zahra Sharif Khodaei ◽  
M.H. Aliabadi
Keyword(s):  
Statistical Analysis ◽  
Health Monitoring ◽  
Sensor Failure ◽  
Impact Detection ◽  
Sensing Systems ◽  
Detection And Identification ◽  
Passive Sensing ◽  
Service Load ◽  
Reliability And Robustness ◽  
Load Conditions

Structural Health Monitoring (SHM) techniques have gained an increased interest to be utilised alongside NDI techniques for aircraft maintenance. However, to take the SHM methodologies from the laboratory conditions to actual structures under real load conditions requires them to be assessed in terms of reliability and robustness. In this work, a statistical analysis is carried out for a passive SHM system capable of impact detection and identification. The sensitivity of the platform to parameters such as noise, sensor failure and in-service load conditions has been investigated and reported.

Structural Health Monitoring of Research-Scale Wind Turbine Blades

2013 ◽  
Vol 558 ◽  
pp. 364-373 ◽  
Author(s):  
Stuart G. Taylor ◽  
Kevin M. Farinholt ◽  
Gyu Hae Park ◽  
Charles R. Farrar ◽  
Michael D. Todd ◽  
...  
Keyword(s):  
Structural Health Monitoring ◽  
Embedded Systems ◽  
Wind Turbine ◽  
Health Monitoring ◽  
Turbine Blades ◽  
Field Tests ◽  
Ultrasonic Waves ◽  
Wind Turbine Blades ◽  
Structural Health ◽  
Sensing System

This paper presents ongoing work by the authors to implement real-time structural health monitoring (SHM) systems for operational research-scale wind turbine blades. The authors have been investigating and assessing the performance of several techniques for SHM of wind turbine blades using piezoelectric active sensors. Following a series of laboratory vibration and fatigue tests, these techniques are being implemented using embedded systems developed by the authors. These embedded systems are being deployed on operating wind turbine platforms, including a 20-meter rotor diameter turbine, located in Bushland, TX, and a 4.5-meter rotor diameter turbine, located in Los Alamos, NM. The SHM approach includes measurements over multiple frequency ranges, in which diffuse ultrasonic waves are excited and recorded using an active sensing system, and the blades global ambient vibration response is recorded using a passive sensing system. These dual measurement types provide a means of correlating the effect of potential damage to changes in the global structural behavior of the blade. In order to provide a backdrop for the sensors and systems currently installed in the field, recent damage detection results for laboratory-based wind turbine blade experiments are reviewed. Our recent and ongoing experimental platforms for field tests are described, and experimental results from these field tests are presented. LA-UR-12-24691.

Sign in / Sign up

Export Citation Format

Share Document