Oil Recovery in Low Permeability Sandstone Reservoirs Using Surfactant-Polymer Flooding

2015 ◽  
Author(s):  
C. Marliere ◽  
N. Wartenberg ◽  
M. Fleury ◽  
R. Tabary ◽  
C. Dalmazzone ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Polymer Flooding ◽  
Low Permeability ◽  
Sandstone Reservoirs

scholarly journals Investigation on degradation mechanism of polymer blockages in unconsolidated sandstone reservoirs

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 55-60
Author(s):  
Wenting Dong ◽  
Dong Zhang ◽  
Keliang Wang ◽  
Yue Qiu
Keyword(s):  
Oil Recovery ◽  
Degradation Mechanism ◽  
Injection Pressure ◽  
Polymer Flooding ◽  
Core Flooding ◽  
Reservoir Properties ◽  
Thermal Analyzer ◽  
Sandstone Reservoirs ◽  
Suction Index ◽  
Weighing Method

AbstractPolymer flooding technology has shown satisfactorily acceptable performance in improving oil recovery from unconsolidated sandstone reservoirs. The adsorption of the polymer in the pore leads to the increase of injection pressure and the decrease of suction index, which affects the effect of polymer flooding. In this article, the water and oil content of polymer blockages, which are taken from Bohai Oilfield, are measured by weighing method. In addition, the synchronous thermal analyzer and Fourier transform infrared spectroscopy (FTIR) are used to evaluate the composition and functional groups of the blockage, respectively. Then the core flooding experiments are also utilized to assess the effect of polymer plugs on reservoir properties and optimize the best degradant formulation. The results of this investigation show that the polymer adsorption in core after polymer flooding is 0.0068 g, which results in a permeability damage rate of 74.8%. The degradation ability of the agent consisting of 1% oxidizer SA-HB and 10% HCl is the best, the viscosity of the system decreases from 501.7 to 468.5 mPa‧s.

The Research on Effect Factors of the Polymer Flooding in Low Permeability Reservoir of Daqing Oilfield

2011 ◽  
Vol 383-390 ◽  
pp. 3809-3813
Author(s):  
Yong Li Wang ◽  
Tao Li ◽  
Zhi Guo Fu ◽  
Shu Xia Liu ◽  
Bai Lin Yu ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Injection Rate ◽  
Polymer Flooding ◽  
Low Permeability ◽  
Effect Factors ◽  
Field Development ◽  
Low Permeability Reservoir ◽  
Well Pattern ◽  
Simulation Results ◽  
Enhance Oil Recovery

The pilot block is a heterogeneous reservoir with low permeability which is only 100-200(mD). Polymer flooding will be used to enhance oil recovery (EOR). Therefore, some experiment will be carried out in this pilot block .According to the simulation results, we can infer the effect factors of the polymer flooding such as concentration, injection rate, slug amounts, and well pattern. It gives us effective information for the field development plan.

LARGE-SCALE SIMULATION OF OIL RECOVERY BY SURFACTANT-POLYMER FLOODING

2016 ◽  
Vol 4 (1) ◽  
pp. 12-31 ◽  
Author(s):  
D.Zh. Akhmed-Zaki ◽  
T.S. Imankulov ◽  
B. Matkerim ◽  
B.S. Daribayev ◽  
K.A. Aidarov ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Large Scale ◽  
Polymer Flooding ◽  
Large Scale Simulation

ASSESSMENT OF OIL WELL PRODUCTIVITY IN LOW-PERMEABILITY RESERVOIRS IN THE FIELDS OF EASTERN SIBERIA

2017 ◽  
pp. 30-36
Author(s):  
R. V. Urvantsev ◽  
S. E. Cheban
Keyword(s):  
Oil Recovery ◽  
Large Scale ◽  
Oil And Gas ◽  
Oil Extraction ◽  
Low Permeability ◽  
Oil Well ◽  
Eastern Siberia ◽  
Development Costs ◽  
Traditional Fields ◽  
Low Permeability Reservoirs

The 21st century witnessed the development of the oil extraction industry in Russia due to the intensifica- tion of its production at the existing traditional fields of Western Siberia, the Volga region and other oil-extracting regions, and due discovering new oil and gas provinces. At that time the path to the development of fields in Eastern Siberia was already paved. The large-scale discoveries of a number of fields made here in the 70s-80s of the 20th century are only being developed now. The process of development itself is rather slow in view of a number of reasons. Create a problem of high cost value of oil extraction in the region. One of the major tasks is obtaining the maximum oil recovery factor while reducing the development costs. The carbonate layer lying within the Katangsky suite is low-permeability, and its inventories are categorised as hard to recover. Now, the object is at a stage of trial development,which foregrounds researches on selecting the effective methods of oil extraction.

scholarly journals Experimental investigation of the displacement flow mechanism and oil recovery in primary polymer flood operations

2021 ◽  
Vol 3 (5) ◽  
Author(s):  
Ruissein Mahon ◽  
Gbenga Oluyemi ◽  
Babs Oyeneyin ◽  
Yakubu Balogun
Keyword(s):  
Relative Permeability ◽  
Oil Recovery ◽  
Polymer Flooding ◽  
Mobility Control ◽  
List Type ◽  
Motor Oil ◽  
Flow Mechanism ◽  
Fractional Flow ◽  
Recovery Method ◽  
Polymer Flood

Abstract Polymer flooding is a mature chemical enhanced oil recovery method employed in oilfields at pilot testing and field scales. Although results from these applications empirically demonstrate the higher displacement efficiency of polymer flooding over waterflooding operations, the fact remains that not all the oil will be recovered. Thus, continued research attention is needed to further understand the displacement flow mechanism of the immiscible process and the rock–fluid interaction propagated by the multiphase flow during polymer flooding operations. In this study, displacement sequence experiments were conducted to investigate the viscosifying effect of polymer solutions on oil recovery in sandpack systems. The history matching technique was employed to estimate relative permeability, fractional flow and saturation profile through the implementation of a Corey-type function. Experimental results showed that in the case of the motor oil being the displaced fluid, the XG 2500 ppm polymer achieved a 47.0% increase in oil recovery compared with the waterflood case, while the XG 1000 ppm polymer achieved a 38.6% increase in oil recovery compared with the waterflood case. Testing with the motor oil being the displaced fluid, the viscosity ratio was 136 for the waterflood case, 18 for the polymer flood case with XG 1000 ppm polymer and 9 for the polymer flood case with XG 2500 ppm polymer. Findings also revealed that for the waterflood cases, the porous media exhibited oil-wet characteristics, while the polymer flood cases demonstrated water-wet characteristics. This paper provides theoretical support for the application of polymer to improve oil recovery by providing insights into the mechanism behind oil displacement. Graphic abstract Highlights The difference in shape of relative permeability curves are indicative of the effect of mobility control of each polymer concentration. The water-oil systems exhibited oil-wet characteristics, while the polymer-oil systems demonstrated water-wet characteristics. A large contrast in displacing and displaced fluid viscosities led to viscous fingering and early water breakthrough.

Sign in / Sign up

Export Citation Format

Share Document