Oil Recovery Enhancement in Carbonate Reservoirs Via Low Saline Water Flooding in Presence of Low Concentration Active Ions; A Case Study

Author(s):  
A. Mohsenzadeh ◽  
P. Pourafshary ◽  
Y. Al-Wahaibi
2020 ◽  
Vol 17 (3) ◽  
pp. 749-758
Author(s):  
Omolbanin Seiedi ◽  
Mohammad Zahedzadeh ◽  
Emad Roayaei ◽  
Morteza Aminnaji ◽  
Hossein Fazeli

AbstractWater flooding is widely applied for pressure maintenance or increasing the oil recovery of reservoirs. The heterogeneity and wettability of formation rocks strongly affect the oil recovery efficiency in carbonate reservoirs. During seawater injection in carbonate formations, the interactions between potential seawater ions and the carbonate rock at a high temperature can alter the wettability to a more water-wet condition. This paper studies the wettability of one of the Iranian carbonate reservoirs which has been under Persian Gulf seawater injection for more than 10 years. The wettability of the rock is determined by indirect contact angle measurement using Rise in Core technique. Further, the characterization of the rock surface is evaluated by molecular kinetic theory (MKT) modeling. The data obtained from experiments show that rocks are undergoing neutral wetting after the aging process. While the wettability of low permeable samples changes to be slightly water-wet, the wettability of the samples with higher permeability remains unchanged after soaking in seawater. Experimental data and MKT analysis indicate that wettability alteration of these carbonate rocks through prolonged seawater injection might be insignificant.


2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Ji Ho Lee ◽  
Kun Sang Lee

Carbonated water injection (CWI) induces oil swelling and viscosity reduction. Another advantage of this technique is that CO2 can be stored via solubility trapping. The CO2 solubility of brine is a key factor that determines the extent of these effects. The solubility is sensitive to pressure, temperature, and salinity. The salting-out phenomenon makes low saline brine a favorable condition for solubilizing CO2 into brine, thus enabling the brine to deliver more CO2 into reservoirs. In addition, low saline water injection (LSWI) can modify wettability and enhance oil recovery in carbonate reservoirs. The high CO2 solubility potential and wettability modification effect motivate the deployment of hybrid carbonated low salinity water injection (CLSWI). Reliable evaluation should consider geochemical reactions, which determine CO2 solubility and wettability modification, in brine/oil/rock systems. In this study, CLSWI was modeled with geochemical reactions, and oil production and CO2 storage were evaluated. In core and pilot systems, CLSWI increased oil recovery by up to 9% and 15%, respectively, and CO2 storage until oil recovery by up to 24% and 45%, respectively, compared to CWI. The CLSWI also improved injectivity by up to 31% in a pilot system. This study demonstrates that CLSWI is a promising water-based hybrid EOR (enhanced oil recovery).


2021 ◽  
Author(s):  
Navpreet Singh ◽  
Hemanta Kumar Sarma

Abstract Low salinity waterflooding has been an area of great interest for researchers for almost over three decades for its perceived "simplicity," cost-effectiveness, and the potential benefits it offers over the other enhanced oil recovery (EOR) techniques. There have been numerous laboratory studies to study the effect of injection water salinity on oil recovery, but there are only a few cases reported worldwide where low salinity water flooding (LSW) has been implemented on a field scale. In this paper, we have summarized the results of our analyses for some of those successful field cases for both sandstone and carbonate reservoirs. Most field cases of LSW worldwide are in sandstone reservoirs. Although there have been a lot of experimental studies on the effect of water salinity on recovery in carbonate reservoirs, only a few cases of field-scale implementation have been reported for the LSW in carbonate reservoirs. The incremental improvement expected from the LSW depends on various factors like the brine composition (injection and formation water), oil composition, pressure, temperature, and rock mineralogy. Therefore, all these factors should be considered, together with some specially designed fit-for-purpose experimental studies need to be performed before implementing the LSW on a field scale. The evidence of the positive effect of LSW at the field scale has mostly been observed from near well-bore well tests and inter-well tests. However, there are a few cases such Powder River Basin in the USA and Bastrykskoye field in Russia, where the operators had unintentionally injected less saline water in the past and were pleasantly surprised when the analyses of the historical data seemed to attribute the enhanced oil recovery due to the lower salinity of the injected water. We have critically analyzed all the major field cases of LSW. Our paper highlights some of the key factors that worked well in the field, which showed a positive impact of LSW and a comparative assessment of the incremental recovery realized from the reservoir visa-a-vis the expectations generated from the laboratory-based experimental studies. It is envisaged that such a comparison could be more meaningful and reliable. Also, it identifies the likely uncertainties (and their sources) associated during the field implementation of LSW.


Sign in / Sign up

Export Citation Format

Share Document