A Unified Parameter to Represent Reservoir Heterogeneity

2021 ◽  
Author(s):  
Nandana Ramabhadra Agastya
Keyword(s):  
Water Saturation ◽  
Pressure Ratio ◽  
Universal Method ◽  
Permeability Ratio ◽  
Initial Water ◽  
Vertical Permeability ◽  
Radar Chart ◽  
Horizontal Permeability ◽  
Water Cut ◽  
Thief Zone

Abstract We aim to find a universal method and/or parameter to quantify impact of overall heterogeneity on waterflood performance. For this purpose, we combined the Lorenz coefficient, horizontal permeability to vertical permeability ratio, and thief zone permeability to average permeability ratio, with a radar chart. The area of the radar chart serves as a single parameter to rank reservoirs according to heterogeneity, and correlates to waterflood performance. The parameters investigated are vertical and horizontal permeability. Average porosity, initial water saturation, and initial diagonal pressure ratio are kept constant. Computer based experiments are used over the course of this entire research. We conducted permeability studies that demonstrate the effects of thief zones and crossflow. After normalizing these parameters into a number between 0 and 1, we then plot them on a radar chart. A reservoir's overall degree of heterogeneity can be inferred using the radar chart area procedure discussed in this study. In general, our simulations illustrate that the larger the radar chart area, the more heterogenous the reservoir is, which in turn yields higher water cut trends and lower recovery factors. Computer simulations done during this study also show that the higher the Lorenz coefficient, the higher the probability of a thief zone to exist. Simulations done to study crossflow also show certain trends with respect to under tonguing and radar chart area.

scholarly journals INFLUENCE OF THE WATER SATURATION DEGREE ON DEMULSIFICATION OF THE RHEOLOGIC COMPLEX OILS

2021 ◽  
Vol 11 (07) ◽  
pp. 14-21
Author(s):  
G. G. Ismayilov G. G. Ismayilov ◽  
Kh. N. Babirov Kh. N. Babirov
Keyword(s):  
Water Saturation ◽  
Water Drop ◽  
Experimental Studies ◽  
Initial Water ◽  
Water Emulsion ◽  
Before And After ◽  
Different Temperatures ◽  
Oil Emulsions ◽  
Water Cut ◽  
Demulsification Process

Studies of recent years have determined that oil emulsions are also characterized by a degree of water saturation. Since as water saturation increases (water dispersion in oil), the viscosity of oil emulsions increases significantly. The article investigated the rheological properties of various artificially created emulsions based on rheological complex oils at different temperatures. It has been determined that with an increasing of water cut and water saturation, the viscosity of the system will increase. The article also investigated the effect of changing the water content of oil on its demulsification. It has been found that by purposeful enlargement of water saturation it is possible to significantly reduce the demulsifier consumption while maintaining the efficiency of the dehydrating process. Demulsifier Disolvan-4411 was used for demulsification process. Water-oil emulsions with an initial water cut 22%were dosed with various reagent additives and samples were taken for analyzing. Temperature kept identical during all studies. The effectiveness of water-oil emulsions before and after demulsification with the demulsifier was evaluated by the amount of water dropped from stable water-emulsion in graduated bottles (method Bottle Test). Analyzing the stability of oil emulsions depending on water drop, according consumption of demulsifier we found that 2 factors impact effectiveness of demulsification process: the content of aqueous phase and degree of its dispersion. The result of experimental studies show that with an increase in oil water saturation, consumption of demulsifier decreases. Only with increasing water saturation percentage 70% and higher, the water drop rate exceeds 99%, which meets oil treatment requirements Keywords: oil emulsions, water saturation, viscosity, demulsification, demulsifier, flow curves.

Real-Time EM Look-Ahead Resistivity for Mapping of Oil/Water Contact While Drilling at Low Deviated Well, New Perspective for Mature Oil Fields Development: A Case Study Of Umm Gudair Field, Kuwait

2021 ◽  
Author(s):  
Nasser Faisal Al-Khalifa ◽  
Mohammed Farouk Hassan ◽  
Deepak Joshi ◽  
Asheshwar Tiwary ◽  
Ihsan Taufik Pasaribu ◽  
...  
Keyword(s):  
Water Saturation ◽  
High Water ◽  
Carbonate Reservoir ◽  
Water Contact ◽  
Saturation Zone ◽  
Look Ahead ◽  
Production History ◽  
Oil Water ◽  
High Water Cut ◽  
Water Cut

Abstract The Umm Gudair (UG) Field is a carbonate reservoir of West Kuwait with more than 57 years of production history. The average water cut of the field reached closed to 60 percent due to a long history of production and regulating drawdown in a different part of the field, consequentially undulating the current oil/water contact (COWC). As a result, there is high uncertainty of the current oil/water contact (COWC) that impacts the drilling strategy in the field. The typical approach used to develop the field in the lower part of carbonate is to drill deviated wells to original oil/water contact (OOWC) to know the saturation profile and later cement back up to above the high-water saturation zone and then perforate with standoff. This method has not shown encouraging results, and a high water cut presence remains. An innovative solution is required with a technology that can give a proactive approach while drilling to indicate approaching current oil/water contact and geo-stop drilling to give optimal standoff between the bit and the detected water contact (COWC). Recent development of electromagnetic (EM) look-ahead resistivity technology was considered and first implemented in the Umm Gudair (UG) Field. It is an electromagnetic-based signal that can detect the resistivity features ahead of the bit while drilling and enables proactive decisions to reduce drilling and geological or reservoir risks related to the well placement challenges.

scholarly journals Estimating reservoir permeability with borehole radar

Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. H51-H60
Author(s):  
Feng Zhou ◽  
Iraklis Giannakis ◽  
Antonios Giannopoulos ◽  
Klaus Holliger ◽  
Evert Slob
Keyword(s):  
Water Saturation ◽  
Time Lapse ◽  
Drilling Mud ◽  
Invasion Depth ◽  
Initial Water ◽  
Oil Drilling ◽  
Reservoir Evaluation ◽  
Reservoir Permeability ◽  
Borehole Radar ◽  
Porosity And Permeability

In oil drilling, mud filtrate penetrates into porous formations and alters the compositions and properties of the pore fluids. This disturbs the logging signals and brings errors to reservoir evaluation. Drilling and logging engineers therefore deem mud invasion as undesired and attempt to eliminate its adverse effects. However, the mud-contaminated formation carries valuable information, notably with regard to its hydraulic properties. Typically, the invasion depth critically depends on the formation porosity and permeability. Therefore, if adequately characterized, mud invasion effects could be used for reservoir evaluation. To pursue this objective, we have applied borehole radar to measure mud invasion depth considering its high radial spatial resolution compared with conventional logging tools, which then allows us to estimate the reservoir permeability based on the acquired invasion depth. We investigate the feasibility of this strategy numerically through coupled electromagnetic and fluid modeling in an oil-bearing layer drilled using freshwater-based mud. Time-lapse logging is simulated to extract the signals reflected from the invasion front, and a dual-offset downhole antenna mode enables time-to-depth conversion to determine the invasion depth. Based on drilling, coring, and logging data, a quantitative interpretation chart is established, mapping the porosity, permeability, and initial water saturation into the invasion depth. The estimated permeability is in a good agreement with the actual formation permeability. Our results therefore suggest that borehole radar has significant potential to estimate permeability through mud invasion effects.

scholarly journals Analysis of filtration and electrical properties anisotropy of terrigenous reservoir rocks (for DDB axial zone reservoirs)

2019 ◽  
Keyword(s):  
Electrical Resistivity ◽  
Gas Permeability ◽  
Vertical Direction ◽  
Absolute Permeability ◽  
Electrical Anisotropy ◽  
Reservoir Rocks ◽  
Vertical Permeability ◽  
Irreducible Water Saturation ◽  
Horizontal Permeability ◽  
Filtration Properties

The paper focuses on the filtration and electrical anisotropy coefficients and relationship between vertical and horizontal permeability in sandstone reservoir rocks. Field case study of DDB reservoir rocks. Petrophysical properties and parameters are estimated from core and log data from a Moscovian and Serpukhovian stages of Dnipro-Donetsk Basin (West-Shebelynka area well 701-Bis and South-Kolomak area well 31). Routine core analysis included estimation of absolute permeability, open porosity, irreducible water saturation and electrical resistivity (on dry and saturated by mineralized solution) of 40 core samples along two orthogonal directions. Shale fraction is estimated using well logging data in wells which are analyzed. The authors report that reservoir rocks are represented by compacted poor-porous (φ <10 %), low permeable (k<1mD) laminated sandstone with different ratios of clay minerals (Vsh from 0,03 to 0,7) and high volume of micaceous minerals (in some cases 20-30 %). Research theory. One of the main objectives of the work is to develop empirical correlation between vertical permeability and other capacitive and filtration properties for compacted sandstone reservoirs. A modified Kozeny-Carman equation and the concept of hydraulic average radius form the basis for the technique. Results. Coefficients of the anisotropy of gas permeability (IA) and electrical resistivity (λ) are defined based on the results of petrophysical studies. The experiments proved that IA lies in a range from 0,49 to 5 and λ from 0,77 to 1,06. Permeability and electrical resistivity anisotropy in most cases have horizontal distribution. It has been shown that in West-Shebelynka area sample №1 (depth 4933 m) there is probably no fluids flow in vertical direction and in samples №№3 and 15 fractures have the vertical orientation. We have also found that the values of electrical and filtration anisotropy for all samples of South-Kolomak area are similar, this characterized the unidirectionality in their filtration properties, as well as the fact that the motion of the fluid flow mainly in the horizontal direction. In the studied rocks the degree of anisotropy has been concluded to depend on the volume of clay and micaceous minerals, their stratification, fractures, density, and their orientation. New correlation between vertical permeability, horizontal permeability and effective porosity are developed for Late Carboniferous DDB intervals that are analyzed.

Sign in / Sign up

Export Citation Format

Share Document