scholarly journals An effect of carboxymethyl starch addition on adhesion to paper of water-soluble pressure-sensitive adhesive

2021 ◽  
Author(s):  
Katarzyna Wilpiszewska ◽  
Zbigniew Czech
Keyword(s):  
Shear Strength ◽  
Paper Industry ◽  
Degree Of Substitution ◽  
Water Soluble ◽  
Pressure Sensitive Adhesive ◽  
Adhesive Properties ◽  
Shear Strength Test ◽  
Carboxymethyl Starch ◽  
Pressure Sensitive ◽  
Peel Adhesion

Abstract Introducing biopolymer derivative, i.e. carboxymethyl starch into pressure-sensitive adhesives for paper industry has been proposed. Obtained adhesives were transferred onto water-dispersible paper carrier giving repulpable double-sided splicing tape. The effect of carboxymethyl starch degree of substitution on essential adhesive properties: tack, peel adhesion, as well as shear strength for steel and various papers has been tested. Additionally, the solubility in water and alkaline medium has been evaluated. The highest tack and peel adhesion increase was reported for PSA containing CMS with degree of substitution DS 0.86, to fax paper. Moreover, the dynamic shear strength test imitating the shear conditions in paper processing revealed, that the highest values of this parameters exhibited the system with 15 wt.% CMS DS 0.86. For this system the shortest water-dissolving times as well as at elevated pH were noted: 314 s and 60 s, respectively.

scholarly journals UV-Crosslinkable Photoreactive Pressure-Sensitive Adhesives Synthesized from Butyl Acrylate and 4-Acryloyloxy Benzophenone

2013 ◽  
Vol 8 ◽  
pp. 21-28 ◽  
Author(s):  
Zbigniew Czech ◽  
Dominika Sowa ◽  
Jagoda Kowalska
Keyword(s):  
Shear Strength ◽  
Molecular Mass ◽  
Butyl Acrylate ◽  
Cohesive Strength ◽  
Pressure Sensitive Adhesive ◽  
Adhesive Properties ◽  
Pressure Sensitive Adhesives ◽  
Uv Crosslinking ◽  
Pressure Sensitive ◽  
Peel Adhesion

The manuscript describes synthesized of photoreactive UV-crosslinkable solvent-borne acrylic pressure-sensitive adhesives (PSA) based on butyl acrylate (BA) and copolymerizable photoinitiator 4-acryloyloxy benzophenone (ABP) characterized by molecular mass in the range of 180 000 to 480 000 Dalton. These copolymers were tacky but possessed insufficient cohesive strength after UV-crosslinking to be useful as PSA. They resulted in materials having a balance of cohesive and adhesive characteristics required of good PSA. Some of the parameters affecting the pressure-sensitive adhesive properties of the copolymer are: amount of the 4-acryloyloxy benzophenone, molecular mass of the polymeric components, UV-reactivity and such important properties like tack, peel adhesion and shear strength.

scholarly journals Butyl acrylate/4-acryloyloxy benzophenone copolymers as photoreactive UV-crosslinkable pressure-sensitive adhesives

2009 ◽  
Vol 11 (3) ◽  
pp. 1-4
Author(s):  
Zbigniew Czech ◽  
Agnieszka Butwin
Keyword(s):  
Molecular Mass ◽  
Butyl Acrylate ◽  
Polymer System ◽  
Pressure Sensitive Adhesive ◽  
Adhesive Properties ◽  
Pressure Sensitive Adhesives ◽  
Uv Crosslinking ◽  
Pressure Sensitive ◽  
Peel Adhesion ◽  
Radical Solution

Butyl acrylate/4-acryloyloxy benzophenone copolymers as photoreactive UV-crosslinkable pressure-sensitive adhesives It has previously been shown that copolymers of butyl acrylate with 4-acryloyloxy benzophenone can be used as pressure-sensitive adhesives (PSAs). This paper presents the synthesis and application of a solvent-borne polymer system for the preparation of photoreactive UV-crosslinkable acrylic pressure-sensitive adhesives. Butyl acrylate/benzophenone copolymers with molecular mass in the range 180 000 to 480 000 Dalton were prepared by carrying out free-radical solution polymerization. These copolymers were found to be tacky but in some cases to possess insufficient cohesive strength after UV-crosslinking to be useful as PSAs. The other copolymers resulted in materials with the balance of cohesive and adhesive characteristics required of good PSAs. Some of the parameters affecting the pressure-sensitive adhesive properties of the copolymers are the concentration of 4-acryloyloxy benzophenone, the molecular mass of the polymeric components, the UV-reactivity, and properties such as tack, peel adhesion, and cohesion.

scholarly journals Water-borne pressure-sensitive adhesives acrylics modified using amorphous silica nanoparticles

2016 ◽  
Vol 18 (4) ◽  
pp. 124-128 ◽  
Author(s):  
Zbigniew Czech ◽  
Zbigniew Maciejewski ◽  
Krystyna Kondratowicz-Maciejewska
Keyword(s):  
Shear Strength ◽  
Silica Nanoparticles ◽  
Amorphous Silica ◽  
Pressure Sensitive Adhesive ◽  
Pressure Sensitive Adhesives ◽  
Pressure Sensitive ◽  
Counter Ion ◽  
Peel Adhesion ◽  
Medical Materials ◽  
Water Borne

Abstract The application of water-borne pressure-sensitive adhesives (PSA) based on acrylics is increasing in a variety of industrial areas. The have been used for manufacturing of double sided and carrier free mounting tapes, splicing tapes, marking and sign films, self-adhesive labels, packaging tapes, protective films and diverse high quality medical materials. Nano-sized inorganic fillers can modify diverse adhesive and self-adhesive coating properties such as tack, peel adhesion, shear strength at 20°C and 70°C, and removability Amorphous synthetic silica nanoparticles in form of water dispersions: Ludox PX-30 (30 wt.% silica stabilizing with counter ion sodium), Ludox PT-40 (40 wt.% silica stabilizing with counter ion sodium), Ludox PT-40AS (40 wt.% silica stabilizing with counter ion ammonium), and Ludox PW-50 (50 wt.% silica stabilizing with counter ion sodium) (from Grace) in concentrations between 1 and 5wt.% were used for modifying of water-born pressure-sensitive adhesive acrylics: Acronal 052, Acronal CR 516 (both BASF) and Plextol D273 (Synthomer) properties. It has been found in this study that the nano-technologically reinforced system containing of Acronal 052 and amorphous silica Ludox PX-30 showed a great enhancement in tack, peel adhesion and shear strength. In this paper we evaluate the performance of Acronal 052 modified with amorphous silica Ludox PX-30.

scholarly journals Novel Photoreactive Pressure-Sensitive Adhesives (PSA) Based on Acrylics Containing Additionable Photoinitiators

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5151
Author(s):  
Zbigniew Czech ◽  
Janina Kabatc ◽  
Marcin Bartkowiak ◽  
Adam Licbarski ◽  
Karolina Mozelewska ◽  
...  
Keyword(s):  
Shear Strength ◽  
Polymer Chain ◽  
Uv Light ◽  
Pressure Sensitive Adhesive ◽  
Acrylic Polymer ◽  
Pressure Sensitive Adhesives ◽  
Uv Crosslinking ◽  
Pressure Sensitive ◽  
Peel Adhesion ◽  
Uv Dose

A new class of additionable ultraviolet photoinitiators that can be used, through addition, for modification of the acrylic polymer chain and their influence of main properties of acrylic pressure-sensitive adhesives (PSAs) is described here. The photoinitiators studied are based on benzophenone, dibenzofuran and anthraquinone chromophores. The propyleneimine carbonyl is the reactive additionable group incorporated in the photoinitiator structure. First, the solvent-borne acrylic pressure-sensitive adhesive was synthesized and characterized. Then, a photoinitiator suitable for addition to the acrylic polymer chain possessing a carboxyl group was added before UV-irradiation. A mechanism of UV-initiated cross-linking reaction of acrylic PSA with additionable photoinitiators was done as well. The influence of the concentration and type of photoinitiator, UV-crosslinking time and UV-dose on peel adhesion, shear strength and tack of solvent-borne acrylic pressure-sensitive adhesives cross-linked by UV light was studied and presented here. It was found that the tack depends on the UV-dose and photoinitiator concentration. An increase of UV dose results in an increase of shear strength of acrylic pressure-sensitive adhesive (PSA) formulations.

scholarly journals Acrylic Pressure-Sensitive Adhesives Containing SiO2 Nanoparticles

2013 ◽  
Vol 15 (1) ◽  
pp. 12-14 ◽  
Author(s):  
Zbigniew Czech ◽  
Agnieszka Kowalczyk ◽  
Joanna Ortyl ◽  
Jolanta Świderska
Keyword(s):  
Shear Strength ◽  
Sio2 Nanoparticles ◽  
Shear Resistance ◽  
Inorganic Filler ◽  
Pressure Sensitive Adhesives ◽  
Medical Products ◽  
Pressure Sensitive ◽  
Protective Films ◽  
Carrier Free ◽  
Peel Adhesion

The use of acrylic pressure-sensitive adhesives (PSAs) is increasing in a variety of industrial fields. They have been applied in the manufacture of mounting tapes, self-adhesive labels, protective films, masking tapes, splicing tapes, carrier-free tapes, sign and marking films, and in diverse medical products, such as pads or self-adhesive bioelectrodes. In this study, the application of SiO2 nanoparticles in acrylic PSA was investigated. The properties of the newly synthesized and modified PSA were evaluated via the tack, peel adhesion, shear-strength and shrinkage. It has been found that the nanotechnologically-reinforced systems consisting of monodisperse non-agglomerated SiO2 nanoparticles and self-crosslinked acrylic PSAs showed a great enhancement in tack, peel adhesion, shear resistance and shrinkage, without showing the disadvantages known to result from the use of other inorganic additives. In this paper we evaluate the performance of SiO2 nanoparticles with a size of about 30 nm as inorganic filler into the synthesized solvent-borne acrylic PSA.

Tack and shear strength of hybrid adhesive systems made of phenol-formaldehyde, dextrin and fish glue, and acrylic pressure-sensitive adhesive

Holzforschung ◽  
2012 ◽  
Vol 66 (1) ◽  
Author(s):  
Amir Sahaf ◽  
Karl Englund ◽  
Marie-Pierre G. Laborie
Keyword(s):  
Shear Strength ◽  
Bond Strength ◽  
Phenol Formaldehyde ◽  
Curing Temperature ◽  
Pressure Sensitive Adhesive ◽  
Pressure Sensitive ◽  
Initial Adhesion ◽  
The Subject ◽  
Block Test ◽  
Shear Block

Abstract The development of adhesives that have good initial adhesion (tack) that provides improved mat integrity during shape-forming of wood composites has been the subject of recent research. Hybrid adhesives were made based on thermosetting phenol-formaldehyde (PF), to which three tacky adhesives were added: high tack fish glue (FG), dextrin glue (DX) and a commercial acrylic, pressure-sensitive adhesive (PSA). Tacky adhesives were blended with PF at weight levels of 25%, 50% and 75%. The time-dependent tack development of the resulting hybrid adhesives was evaluated by means of a texture analyzer. The bond strength of adhesives was measured after curing by shear block test. PF/DX blends exhibited the highest tack during longer open times, while blends of PF and FG had low tack during shorter times. PF/PSA blends lost their bond strength completely after being heated at the curing temperature of PF. PF/FG blends did not show a significant decrease in bond strength compared to pure PF. The addition of DX had no effect on shear strength at ratios <75%.

Sign in / Sign up

Export Citation Format

Share Document