Protection From Contamination by 211At, an Enigmatic but Promising Alpha Emitter

Purpose 211At, a promising alpha emitter, can easily volatilize and contaminate the environment. To safely manage this unique alpha emitter, we investigated the permeability of four types of plastic films and gloves against 211At and identified suitable materials to avoid contamination by 211At. Methods Four types of plastic films, polyethylene, polyvinylidene chloride, polyvinyl chloride, and a laminated film, and two types of rubber gloves, latex and nitrile, were examined. Small pieces of filter paper were covered with these materials, and a drop containing 100 kBq of 211At was placed on them. The radioactivity of pieces of filter paper under the materials was evaluated by measuring counts using a gamma counter and obtaining autoradiograms 3.5 h later. These experiments were also performed using 225Ac, 125I, 111In, 201Tl, and 99mTc. Results 211At solution easily penetrated polyethylene, polyvinyl chloride, and latex rubber. Similar results were obtained for 125I, while other radionuclides did not penetrate films or gloves. These results suggest that halogenic radionuclides under anionic conditions are likely to penetrate plastic films and rubber gloves. Conclusion Our evaluation revealed that, when 211At solution is used, the protection by polyvinylidene chloride, a laminated film, or nitrile rubber would be more effective than that by polyethylene, polyvinyl chloride, or latex rubber.