scholarly journals Charge Asymmetry of Muons Generated by Laser- Induced Nuclear Processes in Ultra-dense Hydrogen D(0) and p(0)

2021 ◽  
Author(s):  
Leif Holmlid
Keyword(s):  
Particle Physics ◽  
Nuclear Reactions ◽  
Capture Rate ◽  
Charge Asymmetry ◽  
High Energy ◽  
Current Transformer ◽  
High Energy Density ◽  
Hydrogen Energy ◽  
Charge Symmetry ◽  
Charge Conservation

Abstract Laser-induced nuclear reactions in ultra-dense hydrogen H(0) (review in Physica Scripta 2019) give mesons (kaons and pions) which decay to muons. The process which gives the mesons is baryon annihilation (Holmlid, J. Hydrogen Energy 2021; Holmlid and Olafsson, High Energy Density Phys. 2021). The sign of the muons detected depends on the initial baryons, with D(0) in the meson source producing mainly positive muons and p(0) producing mainly negative muons. This charge asymmetry was reported in Holmlid and Olafsson (Heliyon 2019), and has been confirmed by later experiments with a coil current transformer as beam detector , also in another lab (unpublished). The current coil detector would give no signal from the muons if charge symmetry existed. The charge asymmetry of the muons seems first to be at variance with charge conservation. An analysis of the results which includes charge conservation is given here. It agrees with the standard model of particle physics. Using D(0), the asymmetry is, as previously, proposed to be due to capture of µ- in D atoms and D2 molecules. This gives emission of mainly µ+ and a fraction of > 50% of µ+ from D(0). In p(0), the capture rate of µ- is lower than in D(0). The emitted number of µ+ will be decreased by reaction between µ+ and abundant electrons, forming muonium particles. This effect decreases the fraction of emitted µ+ for both p(0) and D(0), and it is proposed to be the main reason for a larger fraction of emitted µ- in the case of p(0).

scholarly journals Recent Developments of Effective Catalysts for Hydrogen Storage Technology Using N-Ethylcarbazole

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 648 ◽  
Author(s):  
Liu Zhou ◽  
Lin Sun ◽  
Lixin Xu ◽  
Chao Wan ◽  
Yue An ◽  
...  
Keyword(s):  
Hydrogen Storage ◽  
Chemical Properties ◽  
High Energy ◽  
High Energy Density ◽  
Research Progress ◽  
Hydrogen Energy ◽  
Hydrogen Storage Materials ◽  
Long Distance ◽  
Storage Materials ◽  
Hydrogen Carrier

Hydrogen energy is considered to be a desired energy storage carrier because of its high-energy density, extensive sources, and is environmentally friendly. The development of hydrogen storage material, especially liquid organic hydrogen carrier (LOHC), has drawn intensive attention to address the problem of hydrogen utilization. Hydrogen carrier is a material that can reversibly absorb and release hydrogen using catalysts at elevated temperature, in which LOHC mainly relies on the covalent bonding of hydrogen during storage to facilitate long-distance transportation and treatment. In this review, the chemical properties and state-of-the-art of LOHCs were investigated and discussed. It reviews the latest research progress with regard to liquid organic hydrogen storage materials, namely N-ethylcarbazole, and the recent progress in the preparation of efficient catalysts for N-ethylcarbazole dehydrogenation by using metal multiphase catalysts supported by carbon–nitrogen materials is expounded. Several approaches have been considered to obtain efficient catalysts such as increasing the surface area of the support, optimizing particle size, and enhancing the porous structure of the support. This review provides a new direction for the research of hydrogen storage materials and considerations for follow-up research.

Microfabrication research at the National Submicron Facility

1983 ◽  
Vol 41 ◽  
pp. 86-89
Author(s):  
E.D. Wolf
Keyword(s):  
Integrated Circuits ◽  
Particle Physics ◽  
High Speed ◽  
New Technology ◽  
High Energy ◽  
High Energy Particle ◽  
New Science ◽  
Wide Range ◽  
Intermediate Domain ◽  
Circuit Function

Most microelectronics devices and circuits operate faster, consume less power, execute more functions and cost less per circuit function when the feature-sizes internal to the devices and circuits are made smaller. This is part of the stimulus for the Very High-Speed Integrated Circuits (VHSIC) program. There is also a need for smaller, more sensitive sensors in a wide range of disciplines that includes electrochemistry, neurophysiology and ultra-high pressure solid state research. There is often fundamental new science (and sometimes new technology) to be revealed (and used) when a basic parameter such as size is extended to new dimensions, as is evident at the two extremes of smallness and largeness, high energy particle physics and cosmology, respectively. However, there is also a very important intermediate domain of size that spans from the diameter of a small cluster of atoms up to near one micrometer which may also have just as profound effects on society as “big” physics.

Pilot-scale combustion studies with kraft lignin in a powder burner and a CFB boiler

TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 24-30 ◽  
Author(s):  
NIKLAS BERGLIN ◽  
PER TOMANI ◽  
HASSAN SALMAN ◽  
SOLVIE HERSTAD SVÄRD ◽  
LARS-ERIK ÅMAND
Keyword(s):  
Circulating Fluidized Bed ◽  
Black Liquor ◽  
Chloride Content ◽  
Pilot Scale ◽  
High Energy ◽  
Kraft Lignin ◽  
High Energy Density ◽  
Alkali Chloride ◽  
Cfb Boiler ◽  
Solid Biofuel

Processes have been developed to produce a solid biofuel with high energy density and low ash content from kraft lignin precipitated from black liquor. Pilot-scale tests of the lignin biofuel were carried out with a 150 kW powder burner and a 12 MW circulating fluidized bed (CFB) boiler. Lignin powder could be fired in a powder burner with good combustion performance after some trimming of the air flows to reduce swirl. Lignin dried to 10% moisture content was easy to feed smoothly and had less bridging tendencies in the feeding system than did wood/bark powder. In the CFB boiler, lignin was easily handled and cofired together with bark. Although the filter cake was broken into smaller pieces and fines, the combustion was not disturbed. When cofiring lignin with bark, the sulfur emission increased compared with bark firing only, but most of the sulfur was captured by calcium in the bark ash. Conventional sulfur capture also occurred with addition of limestone to the bed. The sulfur content in the lignin had a significantly positive effect on reducing the alkali chloride content in the deposits, thus reducing the high temperature corrosion risk.

A HIGH ENERGY DENSITY ZINC/OXYGEN BATTERY SYSTEM

1966 ◽  
Author(s):  
S. CHODOSH ◽  
E. KATSOULIS ◽  
M. ROSANSKY
Keyword(s):  
Energy Density ◽  
High Energy ◽  
High Energy Density ◽  
Battery System

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Sign in / Sign up

Export Citation Format

Share Document