scholarly journals Relationships among structure, memory, and flow in sheared disordered materials

2021 ◽  
Author(s):  
Kevin Galloway ◽  
Erin Teich ◽  
Xiaoguang Ma ◽  
Christoph Kammer ◽  
Ian Graham ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Numerical Simulations ◽  
Laboratory Experiments ◽  
Excess Entropy ◽  
Disordered Materials ◽  
Microstructural Properties ◽  
Direct Relation ◽  
Colloidal Systems ◽  
Disordered Solids ◽  
Fundamental Challenge

Abstract A fundamental challenge for disordered solids is predicting macroscopic yield from the microscopic arrangements of constituent particles. Yield is accompanied by a sudden and large increase in energy dissipation due to the onset of plastic rearrangements. This suggests that one path to understanding bulk rheology is to map particle configurations to their mode of deformation. Here, we perform laboratory experiments and numerical simulations that are designed to do just that: 2D dense colloidal systems are subjected to oscillatory shear, and particle trajectories and bulk rheology are measured. We quantify particle microstructure using excess entropy. Results reveal a direct relation between excess entropy and energy dissipation, that is insensitive to the nature of interactions among particles. We use this relation to build a physically-informed model that connects rheology to microstructure. Our findings suggest a framework for tailoring the rheological response of disordered materials by tuning microstructural properties.

Study On Energy Dissipation Mechanism of an Impact Damper System

2022 ◽  
Author(s):  
Vinayaravi R ◽  
Jayaraj Kochupillai ◽  
Kumaresan D ◽  
Asraff A. K
Keyword(s):  
Energy Dissipation ◽  
Numerical Simulations ◽  
Fundamental Frequency ◽  
Low Frequency ◽  
High Amplitude ◽  
Lagrangian Multiplier ◽  
Impact Damper ◽  
Contact Algorithm ◽  
Dissipation Of Energy ◽  
Excitation Time

Abstract The objective of this paper is to investigate how higher damping is achieved by energy dissipation as high-frequency vibration due to the addition of impact mass. In an impact damper system, collision between primary and impact masses cause an exchange of momentum resulting in dissipation of energy. A numerical model is developed to study the dynamic behaviour of an impact damper system using a MDOF system with Augmented Lagrangian Multiplier contact algorithm. Mathematical modelling and numerical simulations are carried out using ANSYS FEA package. Studies are carried out for various mass ratios subjecting the system to low-frequency high amplitude excitation. Time responses obtained from numerical simulations at fundamental mode when the system is excited in the vicinity of its fundamental frequency are validated by comparing with experimental results. Magnification factor evaluated from numerical simulation results is comparable with those obtained from experimental data. The transient response obtained from numerical simulations is used to study the behaviour of first three modes of the system excited in vicinity of its fundamental frequency. It is inferred that dissipation of energy is a main reason for achieving higher damping for an impact damper system in addition to being transformed to heat, sound, and/or those required to deform a body.

scholarly journals Energy Dissipation in Solid Roller Bucket and Controlled Stilling Basin for Ogee Stepped Spillway

2019 ◽  
Vol 8 (4) ◽  
pp. 2109-2112
Keyword(s):  
Energy Dissipation ◽  
Laboratory Experiments ◽  
Ideal Condition ◽  
Stepped Spillway ◽  
Type Ii ◽  
Dimensional Parameter ◽  
Stilling Basin ◽  
Sequent Depth ◽  
Tail Water ◽  
The Ideal

Hydraulic jump type II stilling basin is generally preferred as an energy dissipator for ogee spillway but it is uneconomical due to longer structure. On the other hand, roller bucket uses relatively shorter structure over a sloping apron or horizontal stilling basin. In this study, an attempt has been made to evaluate the performance of an ogee profile stepped spillway in combination with solid roller bucket and stilling basin type II for energy dissipation. Laboratory experiments are performed on a physical working model of ogee profile stepped spillway at discharge ranging from 0.0032 to 0.0069 m3 /s for a head of 1.5m, 4m & 7m and the results compared for energy dissipation (non-dimensional parameter (y c / h) = 0.69). The model results show that stepped spillway model without v-notch achieves 92.40 % energy dissipation. Thus this model is found to be more suitable to acquire the ideal condition of sequent depth and tail water depth in stilling basin for all the discharges.

PC-Based Computer Modeling of Combustion Processes

1999 ◽  
Author(s):  
Greg W. Gmurczyk ◽  
Ashwani K. Gupta
Keyword(s):  
Numerical Simulations ◽  
Computer Modeling ◽  
Numerical Experiments ◽  
Laboratory Experiments ◽  
Combustion Process ◽  
Numerical Algorithms ◽  
Computer Hardware ◽  
Simplifying Assumptions ◽  
High Level ◽  
Analytical Approaches

Abstract Constant and significant progress in both computer hardware and numerical algorithms, in recent years, have made it possible to investigate complex phenomena in engineering systems using computer modeling and simulations. Advanced numerical simulations can be treated as an extension of traditional analytical-theoretical analyses. In such cases, some of the simplifying assumptions can usually be dropped and the nonlinear interactions between various processes can be captured. One of the most complex engineering processes encountered in industry is a combustion process utilized either for power/thrust generation or incineration. However, even nowadays, because of the high level of complexity of the general problem of a combustion process in practical systems, it is not currently possible to simulate directly all the length and time scales of interest. Simplifying assumptions still need to be made, but they can be less drastic than in analytical approaches. Therefore, another view of numerical simulations is as a tool to simulate idealized systems and conduct numerical experiments. Such numerical experiments can be complementary to laboratory experiments and can also provide more detailed, nonintrusive diagnostics. Therefore, simulations, along with theory and laboratory experiments, can provide a more complete picture and better understanding of a combustion process. As an example of computer modeling of industrial combustion systems, an enclosed spray flame was considered. Such a flame can frequently be encountered in power generation units, turbine engines, and incinerators. Both the physical and mathematical models were formulated based on data from earlier laboratory studies and results obtained for open air spray flames. The purpose of this study was to use those data as model input to predict the characteristics of a confined flame and provide a means of optimizing the system design with a PC computer.

scholarly journals Observation and analysis of long-periodic modes in a confluence with dominant tributary inflow

2018 ◽  
Vol 40 ◽  
pp. 05043
Author(s):  
Laurent Schindfessel ◽  
Tom De Mulder ◽  
Mia Loccufier
Keyword(s):  
Numerical Simulations ◽  
Secondary Flow ◽  
Significant Influence ◽  
Laboratory Experiments ◽  
Flow Patterns ◽  
Modal Decomposition ◽  
Periodic Oscillations

Confluences with dominant tributary inflow are found to exhibit long-periodic alternations of the flow patterns. They are shown to exist both in laboratory experiments and in numerical simulations. By means of a modal decomposition, insight is given into these long-periodic oscillations. The origin of these oscillations is investigated and their significant influence on the secondary flow patterns in the downstream channel is revealed.

scholarly journals Novel Remanence Determination for Power Transformers Based on Magnetizing Inductance Measurements

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4616
Author(s):  
Chen Wei ◽  
Xianqiang Li ◽  
Ming Yang ◽  
Zhiyuan Ma ◽  
Hui Hou
Keyword(s):  
Numerical Simulations ◽  
Laboratory Experiments ◽  
Power Transformer ◽  
Power Transformers ◽  
Inrush Current ◽  
The Core ◽  
Novel Method ◽  
Simulation Results ◽  
Electro Magnetic ◽  
The Relationship

The remanence (residual flux) in the core of power transformers needs to be determined in advance to eliminate the inrush current during the process of re-energization. In this paper, a novel method is proposed to determine the residual flux based on the relationship between residual flux and the measured magnetizing inductance. The paper shows physical, numerical, and analytical explanations on the phenomenon that the magnetizing inductance decreases with the increase of residual flux under low excitation. Numerical simulations are performed by EMTP (Electro-Magnetic Transient Program) on a 1 kVA power transformer under different amounts of residual flux. The inductance–remanence curves are nearly the same when testing current changes. Laboratory experiments conducted on the same transformer are in line with the numerical simulations. Furthermore, numerical simulation results on a 240 MVA are reported to demonstrate the effectiveness of the proposed method.

Zonal jets and cyclone–anticyclone asymmetry in decaying rotating turbulence: laboratory experiments and numerical simulations

2012 ◽  
Vol 106 (6) ◽  
pp. 557-573 ◽  
Author(s):  
Stefania Espa ◽  
Isabella Bordi ◽  
Thomas Frisius ◽  
Klaus Fraedrich ◽  
Antonio Cenedese ◽  
...  
Keyword(s):  
Numerical Simulations ◽  
Laboratory Experiments ◽  
Zonal Jets ◽  
Rotating Turbulence

Improving Falling Ball Tests for Viscosity Determination

2005 ◽  
Vol 128 (1) ◽  
pp. 157-163 ◽  
Author(s):  
Shihai Feng ◽  
Alan L. Graham ◽  
Patrick T. Reardon ◽  
James Abbott ◽  
Lisa Mondy
Keyword(s):  
Error Analysis ◽  
Numerical Simulations ◽  
Laboratory Experiments ◽  
Newtonian Fluids ◽  
End Effects ◽  
Formal Error ◽  
Ball Test ◽  
Viscosity Determination

Laboratory experiments and numerical simulations are performed to determine the accuracy and reproducibility of the falling-ball test for viscosity determination in Newtonian fluids. The results explore the wall and end effects of the containing cylinder and other possible sources that affect the accuracy and reproducibility of the falling ball tests. A formal error analysis of the falling-ball method, an evaluation of the relative merits of calibration and individual measurements, and an analysis of reproducibility in the falling-ball test are performed. Recommendations based on this study for improving both the accuracy and reproducibility of the falling-ball test are presented.

Sign in / Sign up

Export Citation Format

Share Document