scholarly journals Epsilon Near Zero (ENZ) Based Kagome Photonic Crystal Fiber for Low Loss, High Birefringence and Near Zero Flat Dispersion in THz Regime

2021 ◽  
Author(s):  
Sayed Asaduzzaman ◽  
Hasin Rehana ◽  
M. D. Tanzil Aziz ◽  
Osama S. Faragallah ◽  
Mohammed Baz ◽  
...  
Keyword(s):  
Total Loss ◽  
Confinement Loss ◽  
Frequency Range ◽  
Low Loss ◽  
Material Loss ◽  
High Birefringence ◽  
Crystal Fiber ◽  
Bending Loss ◽  
Background Material ◽  
Epsilon Near Zero

Abstract In this research, we have proposed two novel types of Kagome PCFs one is slotted core PCF (S-KPCF) and another one is circular PCF (C-KPCF). FEM has been applied with boundary condition to investigate the optical properties of Proposed PCFs. HRS material along with Epsilon Near Zero (ENZ) material has been applied in core and TOPAS was used as background material. Numerical investigation takes place a wider frequency range for 0.8 THz to 2 THz. Slotted core PCF (S-KPCF) shows eminent birefringence of 2.98×10− 2, Lower EML of 0.232 cm− 1, lower confinement loss of 2.76×10− 8, Bending loss 10.76×10− 9, Total loss of 0.232cm− 1 at frequency 1THz. Besides circular core PCF (C-KPCF) shows eminent birefringence of 8.69×10− 2, Lower effective material loss of 0.746 cm− 1, lower confinement loss of 2.80×10− 7, Bending loss 7.76×10− 9, Total loss of 0.746cm− 1 at 1THz. Both PCFs show flat dispersion near zero (for S-KPCF is -0.997ps/nm/Km and for C-KPCF is -0.797ps/nm/Km) range. V-Parameter of both of the PCF indicates that both PCF is multimode PCF. Comparison of the proposed PCFs shows that C-KPCF shows better results than S-KPCF and both PCFs shows better results than previous PCFs.

Design and Characterization of an Ultra Low Loss, Dispersion-Flattened Slotted Photonic Crystal Fiber for Terahertz Application

2018 ◽  
Vol 0 (0) ◽  
Author(s):  
Mohammad Rakibul Islam ◽  
Md. Arif Hossain ◽  
Syed Iftekhar Ali ◽  
Jakeya Sultana ◽  
Md. Saiful Islam
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Single Mode ◽  
Confinement Loss ◽  
Terahertz Frequency ◽  
Frequency Range ◽  
Low Loss ◽  
Material Loss ◽  
Crystal Fiber

AbstractA novel photonic crystal fiber (PCF) based on TOPAS, consisting only rectangular slots is presented and analyzed in this paper. The PCF promises not only an extremely low effective material loss (EML) but also a flattened dispersion over a broad frequency range. The modal characteristics of the proposed fiber have been thoroughly investigated using finite element method. The fiber confirms a low EML of 0.009 to 0.01 cm−1 in the frequency range of 0.77–1.05 THz and a flattened dispersion of 0.22±0.01 ps/THz/cm. Besides, some other significant characteristics like birefringence, single mode operation and confinement loss have also been inspected. The simplicity of the fiber makes it easily realizable using the existing fabrication technologies. Thus it is anticipated that the new fiber has the potential to ensure polarization preserving transmission of terahertz signals and to serve as an efficient medium in the terahertz frequency range.

High birefringent, low loss and flattened dispersion asymmetric slotted core-based photonic crystal fiber in THz regime

2019 ◽  
Vol 33 (20) ◽  
pp. 1950218 ◽  
Author(s):  
Md. Khairum Monir ◽  
Mahmudul Hasan ◽  
Bikash Kumar Paul ◽  
Kawsar Ahmed ◽  
Hala J. El-Khozondar ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Real Life ◽  
Simulation Software ◽  
Confinement Loss ◽  
Low Loss ◽  
Material Loss ◽  
Scattering Loss ◽  
High Birefringence ◽  
Crystal Fiber

This paper proposes a novel model to attain high birefringence and low loss in a slotted core-based photonic crystal fiber (PCF) structure in THz regime. The performance of the proposed PCF has been evaluated by applying finite element method (FEM) with full simulation software COMSOL Multiphysics V-5.1. The proposed model gains good optical properties such as high birefringence of 0.24, low effective material loss (EML) of 0.03 cm[Formula: see text], low confinement loss of 6.5 × 10[Formula: see text] (dB/m), low scattering loss of 2 × 10[Formula: see text] (dB/m) and low bending loss of 7.4 × 10[Formula: see text] (dB/cm). The proposed structure also exhibits the flattened dispersion for wider frequency response. However, the real-life fabrication of the suggested model is highly feasible using the current technology due to the unique shape of circular air holes in the cladding region. The outcomes make the proposed PCF a stronger candidate for polarization-preserving applications such as sensing, communications and filtering operations in THz band.

Highly birefringent photonic crystal fiber with D-shaped air holes for terahertz (THz) application

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Biao Wang ◽  
Chunrong Jia ◽  
Jiantan Yang ◽  
Zhigang Di ◽  
Jianquan Yao
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Single Mode ◽  
Confinement Loss ◽  
Operating Characteristics ◽  
High Birefringence ◽  
Crystal Fiber ◽  
The Core ◽  
Bending Loss ◽  
Mode Area

Abstract A new type of high birefringence terahertz (THz) band photonic crystal fiber (PCF) is proposed. D-shaped air holes are introduced into the core of the PCF and the cladding near the core. Some important parameters of this waveguide were researched in the range of 0.6–1.2 THz. The simulation results show that the proposed fiber has a high birefringence of 0.0425 at 0.7 THz. In addition, the confinement loss and the effective mode area are respectively 6.63 × 10−7 dB/m and 0.77 × 105 μm2, when the operating frequency is 1 THz and the high birefringence of 0.04 is maintained. At the same time, very low bending loss and near zero flat positive dispersion are obtained. And has single-mode operating characteristics in the entire research frequency range. The PCF structure will provide new solutions for the application of THz waves and the design of THz waveguides.

Ultra high birefringent dispersion flattened fiber in terahertz regime

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Md. Selim Reza ◽  
Md. Ahasan Habib ◽  
Ibrahim Mustafa Mehedi ◽  
Md. Mottahir Alam ◽  
Shaikh Abdul Latif
Keyword(s):  
Effective Area ◽  
Confinement Loss ◽  
Thz Radiation ◽  
Transmission Characteristics ◽  
Material Loss ◽  
Crystal Fiber ◽  
Porous Core ◽  
Bending Loss ◽  
Polarization Maintaining ◽  
Core Fiber

AbstractIn the current study, a novel Zeonex based porous core photonic crystal fiber (PC-PCF) is presented for polarization-maintaining and dispersion flattened in the terahertz (THz) region. For minimizing the Effective Material Loss (EML), an array of three rectangular and six triangular air holes are surrounded by hexagonal-shaped cladding. Finite Element Method (FEM) is employed through Comsol V5.3a software to design and examine the essential features of the proposed porous core fiber which revealed that it has an extremely small EML of 0.04 cm−1 at 1.2 THz and has almost zero flattened dispersion of 0.8 ± 0.08 ps/THz/cm in 1.0–1.4 THz frequency spectrum. Moreover, the optimum designing parameters offer an extremely high value of birefringence (0.043 at 1.2 THz). Besides, other major features notably bending loss, effective area, and confinement loss are also found to be precise and relatively low. For effective, adaptable and fitting transmission characteristics, this type of design would lay the foundations for broadband THz radiation wide variety of usage in the THz regime.

Theoretical Assessment of a Porous Core Photonic Crystal Fiber for Terahertz Wave Propagation

2018 ◽  
Vol 0 (0) ◽  
Author(s):  
Izaddeen Kabir Yakasai ◽  
Atta Rahman ◽  
Pg Emeroylariffion Abas ◽  
Feroza Begum
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Bulk Material ◽  
Single Mode ◽  
Confinement Loss ◽  
Design Parameters ◽  
Terahertz Waves ◽  
Material Loss ◽  
Crystal Fiber ◽  
Porous Core

AbstractA porous core photonic crystal fiber (PCF) for transmitting terahertz waves is reported and characterized using finite element method. It is shown that by enveloping an octagonal core consisting of only circular air holes in a hexagonal cladding, it is possible to attain low effective material loss that is 73.8% lower than the bulk material absorption loss at 1.0 THz operating frequency. Moreover, a low confinement loss of 7.53×10–5 cm−1 and dispersion profile of 1.0823±0.06 ps/THz/cm within 0.7–1 THz are obtained using carefully selected geometrical design parameters. Other guiding properties such as single-mode operation, bending loss, and effective area are also investigated. The structural design of this porous core PCF is comparatively simple since it contains noncomplex lattices and circular shaped air holes; and therefore, may be implemented using existing fabrication techniques. Due to its auspicious guiding properties, the proposed fiber may be used in single mode terahertz imaging and other short distance terahertz applications.

scholarly journals Efficient Photonic Crystal Fiber Design for Higher OAM Modes with Low Loss Towards Next Generation THz Communication

2021 ◽  
Author(s):  
Bibhatsu Kuiri ◽  
Bubai Dutta ◽  
Nilanjana Sarkar ◽  
Saikat Santra ◽  
Paulomi Mandal ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Confinement Loss ◽  
Solid Core ◽  
Low Loss ◽  
Crystal Fiber ◽  
Fiber Design ◽  
Effective Mode Area ◽  
Mode Purity ◽  
Mode Area

Abstract A newer and efficient solid core with air holes and ring based circular photonic crystal fiber (C-PCF) design is proposed, developed, and studied. The C-PCF structure with a ring core and three layers of air holes is developed to communicate terahertz frequency of the range of 1 THz to 3 THz. Finite element method (FEM) is used to optimize the position, shape and dimensions of air holes and refractive index (RI) of material for the proposed PCF design and check the efficiency to support different orbital angular momentum (OAM) modes for communication. Our novel designed C-PCF supports multiple stable modes with mode purity above 0.9. Confinement loss is in the range of 10-12 dB/cm, highest effective mode area in the order of 1 mm2 is achieved in the investigated study for 3 THz transmission. The study observes that the performance of PCF is strongly dependent on RI of core and cladding.

scholarly journals High birefringence photonic crystal fiber with high nonlinearity and low confinement loss

2015 ◽  
Vol 23 (7) ◽  
pp. 8329 ◽  
Author(s):  
Tianyu Yang ◽  
Erlei Wang ◽  
Haiming Jiang ◽  
Zhijia Hu ◽  
Kang Xie
Keyword(s):  
Photonic Crystal ◽  
Photonic Crystal Fiber ◽  
Confinement Loss ◽  
High Birefringence ◽  
Crystal Fiber ◽  
High Nonlinearity

scholarly journals Dual scaled approach SPR-based PCF RI sensor with ultra-low loss

2021 ◽  
Vol 2070 (1) ◽  
pp. 012109
Author(s):  
Samiha Nuzhat ◽  
Sanjida Sultana ◽  
Faiyaz Bin Hassan ◽  
Shovasis Kumar Biswas ◽  
Mohona Das Gupta ◽  
...  
Keyword(s):  
Figure Of Merit ◽  
Hexagonal Lattice ◽  
Confinement Loss ◽  
The Finite Element Method ◽  
Low Loss ◽  
Plasmonic Material ◽  
Crystal Fiber ◽  
Spr Sensor ◽  
Wavelength Sensitivity ◽  
Hexagonal Arrangement

Abstract We demonstrate an ultra-low loss photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR)in this paper. In this refractive index (RI) sensor, we explored hexagonal-arrangement of airholes and employed only two different sizes of it. The formation of airholes makes the confinement loss (CL) surprisingly low. The maximum CL is as low as 10.71 and 28.58 dB/cm for x and y-pol modes, respectively within a range of refractive indices 1.33-1.40. The maximum gained amplitude sensitivity is -1212 RIU−1 and -2430 RIU−1, and the maximum figure of merit is as high as 583 and 467 respectively for x and y-polarization (pol) modes respectively. In addition to that, we got a maximum wavelength sensitivity, Sw of 14,000nm/RIU for both x and y-pol modes with a minimum sensor resolution of 7.143x10−6. Gold is preferred over other materials as the plasmonic material for its inert behaviour and higher chemical stability. The analysis was carried out using the finite element method (FEM). This sensor, with its elegant configuration, fabrication feasibility, ultra-low loss, stands out to be an effective and eminent prospect in the current burgeoning SPR sensor realm and also prompts further creative exploration in its hexagonal lattice arrangements.

Sign in / Sign up

Export Citation Format

Share Document