scholarly journals Shaking Table Test On Dynamic Response of Bridge Pile Foundation Near Fault Under Strong Earthquake

Author(s):  
Cong Zhang ◽  
Zhong Ju Feng ◽  
Yuan Yuan Kong ◽  
Yun Hui Guan ◽  
Yun Xiu Dong ◽  
...  

Abstract Taking Puqian bridge as the prototype, a 1:30-scale pile-soil-fault interaction model was established. Through the shaking table test, the difference of dynamic response of pile foundation on both sides of fault under 0.15~0.60g ground motion intensity was studied. The pile acceleration, pile top relative displacement, and pile bending moment on both sides of the fault are compared respectively. Research results showed that under the action of a strong earthquake, the pile foundation on the hanging wall was greatly affected by ground motion, and “the hanging wall effect” was significant. As the ground motion intensity increased, the “hanging wall effect” of the pile foundation was more obvious. Combined with the fundamental frequency response and the test phenomenon, when ground motions intensity was strong, cracks appeared near the joint of pile top and platform, soil interface, and bedrock surface. When building a bridge pile foundation near the fault, the seismic design of the pile foundation on the hanging wall of the fault is mainly considered.

2014 ◽  
Vol 580-583 ◽  
pp. 1499-1505 ◽  
Author(s):  
Tian Yu ◽  
Ming Lu ◽  
Xiao Jun Li

Lushan earthquake on 20th April, 2013 was another thrust fault earthquake occurred at Longmen Mountain Fault Zone after 2008 Wenchuan Ms8.0 earthquake. Based on ground motion attenuation model, this paper has chosen 45 strong motion records with rupture distance less than 200km, to analyze the hanging wall effect, topographic effect and rupture directivity effect of Lushan earthquake. The results show that hanging wall effect in Lushan earthquake was not obvious as 2008 Wenchuan earthquake; ground motion in mountain areas attenuated with increasing rupture distance more quickly than that in plain areas; rupture directivity effect is obvious for two components of horizontal ground motion, which are fault-perpendicular and fault-parallel components. PGA in the forward rupture area is larger than those in the backward rupture area. With the period increased, the gap between backward and forward rupture area become small, and finally PGD in backward rupture area is greater than those in the forward rupture area.


2012 ◽  
Vol 238 ◽  
pp. 337-340 ◽  
Author(s):  
Yu Run Li ◽  
Yan Liang ◽  
Xing Wei ◽  
Yun Long Wang ◽  
Zhen Zhong Cao

The study on lateral dynamic response of pile foundation in liquefiable soil is a significant part about seismic damage. In this paper, a new data acquisition system of FBG and calculation methods is used in the small shaking table test. The results show that FBG method used in this test is proved to be efficient and acceptable in both time characteristics and precision characteristics, it may be widely applied in the future doubtlessly. What’s more, the characteristics of p-y curves in different peak accelerations are discussed. And varying of maximum stress and displacement by corresponding acceleration is discussed. A contrast about p-y curve between dry sand and saturate sand is related, which provides a new direction in research about p-y curve.


2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Yunxiu Dong ◽  
Zhongju Feng ◽  
Jingbin He ◽  
Huiyun Chen ◽  
Guan Jiang ◽  
...  

Puqian Bridge is located in a quake-prone area in an 8-degree seismic fortification intensity zone, and the design of the peak ground motion is the highest grade worldwide. Nevertheless, the seismic design of the pile foundation has not been evaluated with regard to earthquake damage and the seismic issues of the pile foundation are particularly noticeable. We conducted a large-scale shaking table test (STT) to determine the dynamic characteristic of the bridge pile foundation. An artificial mass model was used to determine the mechanism of the bridge pile-soil interaction, and the peak ground acceleration range of 0.15 g–0.60 g (g is gravity acceleration) was selected as the input seismic intensity. The results indicated that the peak acceleration decreased from the top to the bottom of the bridge pile and the acceleration amplification factor decreased with the increase in seismic intensity. When the seismic intensity is greater than 0.50 g, the acceleration amplification factor at the top of the pile stabilizes at 1.32. The bedrock surface had a relatively small influence on the amplification of the seismic wave, whereas the overburden had a marked influence on the amplification of the seismic wave and filtering effect. Damage to the pile foundation was observed at 0.50 g seismic intensity. When the seismic intensity was greater than 0.50 g, the fundamental frequency of the pile foundation decreased slowly and tended to stabilize at 0.87 Hz. The bending moment was larger at the junction of the pile and cap, the soft-hard soil interface, and the bedrock surface, where cracks easily occurred. These positions should be focused on during the design of pile foundations in meizoseismal areas.


2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Kan Han ◽  
Chunxiao Xue

In order to reduce the damage of liquefaction of aeolian sand along the Sichuan-Tibet railway, the dynamic response characteristics of saturated aeolian sand in the study area were discussed by using shaking table test. The results show that the macroscopic characteristics of saturated aeolian sand in the study area are subsidence, water flow and fracture. The displacement time history shows that the surface displacement increases with increasing the input ground motion acceleration. When the acceleration is small (0.1g), the vibration in the soil layer has an obvious tendency to enlarge continuously from bottom to top. With the increase of the acceleration (0.2g), the amplification trend basically disappeared. When the acceleration increases to 0.3g, the ground motion increases first and then decreases.


2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Jinping Yang ◽  
Peizhen Li ◽  
Hang Jing ◽  
Meng Gao

This paper studies the influence of the characteristics of the near-fault ground motion on the seismic responses of the structure with energy dissipation devices including soil-structure interaction (SSI). A ten-story reinforced concrete frame rested on soft site is introduced, and the viscous dampers added in the frame are designed. The numerical analysis method of the soil-structure system with viscous dampers is established through ANSYS program. In addition, the response spectra of the main characteristics of the near-fault ground motion, like hanging wall effect, velocity pulse-like effect, and forward-directivity effect, are investigated carefully to learn the features of spectra energy distribution. And then, the dynamic time-history analysis is performed on the SSI system with and without viscous dampers subjected to the selected near-fault ground motion. The study reveals that the seismic responses of the structure subjected to near-fault ground motion with hanging wall effect are obviously larger than those of the footwall effect, indicating the distinct hanging wall effects on the structural dynamic responses. In addition, the performance of the structure with viscous dampers is more influenced by the ground motion containing fling-step effect than that with forward-directivity effect. Moreover, the influence of the horizontal component of forward-directivity ground motion on the seismic responses of the structure is more obvious than that of parallel component ground motion. Consequently, the hanging wall effect, velocity pulse, and horizontal component in forward-directivity effect of the near-fault ground motion have distinct influence on the seismic responses of the structure with energy dissipation devices considering SSI effect, providing insight towards the performance-based seismic design of buildings rested at the near-fault sites considering the seismic SSI effect.


2018 ◽  
Vol 14 (9) ◽  
pp. 155014771879461 ◽  
Author(s):  
Jian Wang ◽  
Qimin Li ◽  
Changwei Yang ◽  
Caizhi Zhou

Dynamic response of road embankment under strong earthquake was explored by site investigation, shaking table tests, and discrete element method simulations, which shows that the distribution of responded accelerations strongly depends on the amplitude of input ground motion and the height of road embankment. When the peak ground acceleration of ground motion is small, peak ground acceleration amplification factors will linearly increase from the toe to the top of the slope; then, it will step into non-linear amplification; when the peak ground acceleration of ground motion is large enough, it will transform from amplification to attenuation. There is a logarithmic relationship between the magnitude of acceleration and the slope amplification factor, and the critical acceleration making the peak ground acceleration transform from amplification to attenuation increases with the raise of embankment height and connects with spectral characteristics of ground motion. There is a logarithmic relationship between the input ground acceleration and the amplification ratio of slope top to toe, and the critical acceleration making the peak ground acceleration transform from amplification to attenuation increases with the raise of embankment height and connects with spectral characteristics of ground motion. The results found should be useful for aseismic of road embankment as well as railway subgrade.


1996 ◽  
Vol 86 (1B) ◽  
pp. S93-S99
Author(s):  
N. A. Abrahamson ◽  
P. G. Somerville

Abstract Systematic differences in ground motion on the hanging wall and footwall during the Northridge earthquake are evaluated using empirical data. An empirical model for the hanging-wall effect is developed for the Northridge earthquake. This empirical model results in up to a 50% increase in peak horizontal accelerations on the hanging wall over the distance range of 10 to 20 km relative to the median attenuation for the Northridge earthquake. In contrast, the peak accelerations on the footwall are not significantly different from the median attenuation over this distance range. Recordings from other reverse events show a similar trend of an increase in the peak accelerations on the hanging wall, indicating that this systematic difference in hanging-wall peak accelerations is likely to be observed in future reverse events.


2012 ◽  
Vol 226-228 ◽  
pp. 1089-1093
Author(s):  
Yu Run Li ◽  
Yan Liang ◽  
Xing Wei ◽  
Yun Long Wang

Lateral dynamic response of pile foundation in liquefiable soil has been one of the focal problems of the geotechnical engineering field and varieties of test methods are put forward by experts and scholars. In the dissertation, a shaking table test is based on and a new calculation method is involved too. It’s the first time that using Fiber Prague Grating (FBG) technology in the method of study on lateral dynamic response of pile foundation in liquefiable soil. Experimental results indicate that calculation by method of FBG is more accurate than that by acceleration integral method. Data processing shows that p-y curve of pile foundation in liquefiable soil can be better to indicate the actual dynamic constitutive relation, and it establishes the theoretical basis of experimental study and engineer application of pile foundation in liquefiable soil


Sign in / Sign up

Export Citation Format

Share Document