scholarly journals Recyclable Ag/TiO2@PDMS Coated Cotton Fabric with Visible-Light Photocatalytic for Efficient Water Purification

2021 ◽  
Author(s):  
Meiling Zhang ◽  
Shuai Jiang ◽  
Fuyi Han ◽  
Heping Chen ◽  
Ni Wang ◽  
...  
Keyword(s):  
Visible Light ◽  
Cotton Fabric ◽  
Water Purification ◽  
Separation Efficiency ◽  
Low Cost ◽  
Water Contact ◽  
Repeated Use ◽  
Oil Purification ◽  
Coated Cotton ◽  
Excellent Stability

Abstract Multifunctional materials for water purification have attracted great attention due to the increased water pollution problems. However, fabricating the low-cost and recyclable separation material is still a challenge. Herein, we developed an Ag/TiO2@PDMS coated cotton fabric with self-clean ability, high flux, superior visible-light photocatalysts ability, and recyclability via the “powder + glue” strategy. The composites exhibit superhydrophobic (water contact angle 157°), and high separation efficiency. The separation efficiency of 20 times of repeated use remains 16322 Lm−2h−1 and the degradation rate of methylene blue (MB) remains almost no change. The high oil purification, catalytic property, excellent stability in harsh condition and recyclability enables the material as a satisfactory candidate for water purification.

scholarly journals Highly Hydrophobic Cotton Fabrics Modified by Poly(methylhydrogen)siloxane and Fluorinated Olefin: Characterization and Applications

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 833
Author(s):  
Huiping Lin ◽  
Qingjian Hu ◽  
Tianyu Liao ◽  
Xinxiang Zhang ◽  
Wenbin Yang ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
Separation Efficiency ◽  
Cotton Fabrics ◽  
Water Contact ◽  
Water Separation ◽  
Oh Groups ◽  
Chemical Structures ◽  
Stain Resistance ◽  
Oil Water Separation ◽  
Highly Hydrophobic

Highly hydrophobic cotton fabrics were obtained with poly(methylhydrogen)siloxane (PMHS) and a further fluorinated olefin modification. The chemical structures and microstructures of PMHS-modified cotton fabrics were characterized, and application of the resultant cotton fabrics in stain resistance and oil–water separation was demonstrated. PMHS chains with very low surface energy were grafted onto cotton fabric by the dehydrogenation reaction between –Si–H of PMHS and –OH groups of cotton fabric at room temperature. The water contact angle of PMHS-modified cotton fabric was 141.7°, which provided the modified cotton fabric with good stain resistance to waterborne pollutants. The separation efficiency of diesel from water was higher than 92% for 20 repeatable separation cycles. A further improvement in stain resistance to oil was also demonstrated by a further addition reaction of 1H,1H,2H-perfluoro-1-decene with PMHS-modified cotton fabric.

scholarly journals CeO2/CdS Heterojunctions Decorated Cotton Fabrics as Facile Recyclable Photocatalysts for Highly Efficient Visible Light Driven Degradation of Methylene Blue

2021 ◽  
Author(s):  
Rui Zou ◽  
Linhua Li ◽  
Lin Yang ◽  
jianwu lan ◽  
Hongyu Liu ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Cotton Fabric ◽  
Low Cost ◽  
Light Response ◽  
Cotton Fabrics ◽  
Degradation Efficiency ◽  
Cds Nanoparticles ◽  
Composite Photocatalysts ◽  
Visible Light Driven

Abstract In this work, visible light response CeO2/CdS decorated cotton fabrics as durable and facile recyclable composite photocatalysts were fabricated for photo-degradation of methylene blue (MB). First of all, amino-functionalized CeO2/CdS nanoparticles were synthesized through a fast, efficient and low-cost coprecipitation method. Subsequently, the as-prepared CeO2/CdS nanoparticles were immobilized on aldehyde-functionalized cotton fabric surfaces as composite photocatalysts via "amine-aldehyde" chemical reaction. The surface microstructure and chemical composition of the CeO2/CdS decorated cotton fabric (CeO2/CdS-CF) were characterized by SEM, FTIR and XPS, respectively. The results showed that CeO2/CdS nanoparticles were successfully anchored on the surface of cotton fabric, and distributed uniformly. As expected, the as-prepared CeO2/CdS-CF exhibited excellent photocatalytic activity, which can degrade MB within 90 min with a degradation efficiency of 93.8% under simulated sunlight irradiation, due to the CeO2/CdS heterostructure with the efficient photo-generated charge transfer and separation. In addition, the degradation efficiency remained above 90.3% after five successive degradation cycles, indicating that the obtained CeO2/CdS-CF possessed excellent stability and recyclability. This work opened up a facile preparation way for the fabrication of durable and recyclable composite photocatalysts, and has a promising application in treating dye contaminated wastewater.

scholarly journals Low Temperature Curable Polyaniline/Bio-based polybenzoxazine Coated Cotton Fabric with Superior UV shielding and Oil-water Separation behaviours

2021 ◽  
Author(s):  
Prabunathan P ◽  
M. Alagar
Keyword(s):  
Low Temperature ◽  
Cotton Fabric ◽  
Separation Efficiency ◽  
Curing Temperature ◽  
Water Separation ◽  
Surface Protection ◽  
Uv Shielding ◽  
Oil Water Separation ◽  
Oil Water ◽  
Coated Cotton

Abstract The present work detailsabout the low temperature curingbehaviour of bio-benzoxazine (C-ddm) prepared using cardanol and diaminodiphenylmethane (ddm)in the presence of polyaniline (PANI). Interestingly, it was found that the curing temperature (Tp) of the benzoxazine monomer (C-ddm) has significantly reduced to 227 ºC from 271 ºC with the incorporation of 2wt% of PANI. The plausible curing mechanism of benzoxazine ring catalysed by PANI was also discussed. Further, the resulted PANI/poly(C-ddm) matrices possessa marginally improvedvalues of glass transisition temperature and char yield. Further, PANI/poly(C-ddm) coated cotton fabric was studied for its UV shielding and surface properties. Furthermore, the UV shielding and surface behaviours of PANI/poly(C-ddm) coated cotton fabrics were explored. The PANI/poly(C-ddm) coated cotton fabric delivered UPF rating as high as 50 + and water contact angle value of162°. In addition, the PANI/poly(C-ddm) coated cotton fabric wasverified for its oil-water separation behavior. It was observed that the PANI/poly(C-ddm) coated cotton fabric offered97.5 % separation efficiency with enhanced flux value of about 6450 L/m2h flux.Thus, the obtained results suggest that the PANI/poly(C-ddm) can be used some of the industrial and environmental surface protection applications.

scholarly journals Fabrication of durable superhydrophobic/oleophilic cotton fabric for highly efficient oil/water separation

2020 ◽  
Author(s):  
M. E. Mohamed ◽  
B. A. Abd-El-Nabey
Keyword(s):  
Cotton Fabric ◽  
Mechanical Stability ◽  
Separation Efficiency ◽  
Silicone Oil ◽  
Absorption Capacity ◽  
Water Contact ◽  
Water Separation ◽  
Coating Method ◽  
Oil Water Separation ◽  
Oil Water

Abstract In the present work, dopamine is self-polymerized on cotton fabric by a simple deep-coating method and followed by modification with an ethanolic solution of palmitic acid: a superhydrophobic/oleophilic cotton fabric was obtained. The as-prepared cotton fabric exhibits a superhydrophobic character with a water contact angle of 157o. The absorption capacity of as-prepared superhydrophobic/oleophilic cotton fabric in n-hexane, petroleum ether, and silicone oil was determined. The results show that silicone oil has the highest absorption capacity while n-hexane has the lowest value. The absorption capacity is nearly constant even after ten cycles, indicating the efficient recyclability of the as-prepared superhydrophobic/oleophilic cotton fabric for oil separation. The as-prepared superhydrophobic/oleophilic cotton fabric shows excellent separation efficiency, high flux rate, and excellent chemical and mechanical stability.

scholarly journals Functionalization of hydrophobic nonwoven cotton fabric for oil and water repellency

2021 ◽  
Vol 3 (5) ◽  
Author(s):  
Pran Krisna Saha ◽  
Rony Mia ◽  
Yang Zhou ◽  
Taosif Ahmed
Keyword(s):  
Cotton Fabric ◽  
Large Scale ◽  
High Efficiency ◽  
Low Cost ◽  
Water Repellency ◽  
Scale Production ◽  
Hydrophobic Surfaces ◽  
Water Contact ◽  
Simple Method ◽  
Remarkable Feature

AbstractHighly hydrophobic surfaces exhibit a remarkable feature in the repellency of oil and water. However, the relatively complex preparation process, high costs, and harmful compounds have largely limited their applications. This research aim is to fabricate hydrophobic nonwoven fabrics with low-cost and nontoxic materials. Despite various wettable materials, nonwoven cotton fabric material bearing hydrophobic surfaces has been received significant attention. This is mainly owing to its easy handling, high flexibility, environment friendly, low cost, biodegradability, high efficiency, and easily scalable fabrication. In this study, a simple chemical modification method using hexadecyltrimethoxysilane (HDTMS) with ethanol which is a better method in comparison with other methods since it is an inexpensive, simple method, and offers an easy adjustment of chemical composition required for a surface to show hydrophobic behaviors. The wetting behavior of cotton samples was investigated by water contact angle measurement. The best result comes from 2 ml HDTMS with 40 ml ethanol at 60 °C. The result shows that the treated cotton fabrics exhibited excellent chemical stability and outstanding non-wettability with the WCA of 126 ± 2°. It also shows that standard oil and water repellency, which offers an opportunity to accelerate the large-scale production of hydrophobic textile materials for new industrial applications. Graphic abstract

scholarly journals Construction of Ag3PO4/SnO2 Heterojunction on Carbon Cloth with Enhanced Visible Light Photocatalytic Degradation

2020 ◽  
Vol 10 (9) ◽  
pp. 3238
Author(s):  
Min Liu ◽  
Guangxin Wang ◽  
Panpan Xu ◽  
Yanfeng Zhu ◽  
Wuhui Li
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Separation Efficiency ◽  
Photogenerated Electron ◽  
Carbon Cloth ◽  
Electron Hole ◽  
Step Process ◽  
Photogenerated Electrons ◽  
Rapid Transfer ◽  
Visible Light Photocatalytic

In this study, the Ag3PO4/SnO2 heterojunction on carbon cloth (Ag3PO4/SnO2/CC) was successfully fabricated via a facile two-step process. The results showed that the Ag3PO4/SnO2/CC heterojunction exhibited a remarkable photocatalytic performance for the degradation of Rhodamine B (RhB) and methylene blue (MB), under visible light irradiation. The calculated k values for the degradation of RhB and MB over Ag3PO4/SnO2/CC are 0.04716 min−1 and 0.04916 min−1, which are higher than those calculated for the reactions over Ag3PO4/SnO2, Ag3PO4/CC and SnO2/CC, respectively. The enhanced photocatalytic activity could mainly be attributed to the improved separation efficiency of photogenerated electron-hole pairs, after the formation of the Ag3PO4/SnO2/CC heterojunction. Moreover, carbon cloth with a large specific surface area and excellent conductivity was used as the substrate, which helped to increase the contact area of dye solution with photocatalysts and the rapid transfer of photogenerated electrons. Notably, when compared with the powder catalyst, the catalysts supported on carbon cloth are easier to quickly recycle from the pollutant solution, thereby reducing the probability of recontamination.

scholarly journals Preparation and photocatalytic performance of metallic Nb0.9Ta0.1S2/2D-C3N4 composite

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Hanxiang Chen ◽  
Jianjian Yi ◽  
Zhao Mo ◽  
Yanhua Song ◽  
Wenshu Yang ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
Low Cost ◽  
Metal Sulfide ◽  
Electron Hole ◽  
Practical Applications ◽  
Energy And Environment ◽  
Photocatalytic Application ◽  
Light Utilization ◽  
Ternary Metal ◽  
Key Issues

Abstract Photocatalysis technology has potential application in the field of energy and environment. How to expand visible light utilization and promote the separation efficiency of the carriers are the key issues for the high active photocatalysts preparation and future practical applications. In this work, a ternary metal sulfide Nb0.9Ta0.1S2 was prepared and used as an electron collector in the photocatalytic application. As a result, the generated electrons are quickly transferred to the surface of the composite to participate in the reaction. It was demonstrated that the photocatalytic activity of 2D-C3N4 was enhanced after the modification of Nb0.9Ta0.1S2. The Nb0.9Ta0.1S2/2D-C3N4 composite material was synthesized by solvothermal method. The composition of 5% Nb0.9Ta0.1S2/2D-C3N4 showed the highest H2 evolution rate of 1961.6 μmolg−1h−1, which was 6.6 times that of 2D-C3N4. The 15% Nb0.9Ta0.1S2/2D-C3N4 exhibited the best activity in Rhodamine B degradation rate of 97% in 2 h, which is 50% higher than that of 2D-C3N4. Nb0.9Ta0.1S2/2D-C3N4 can be used as electron trap to promote the effective separation of electron–hole pairs. This work provides benchmarks in exploring low-cost and efficient cocatalyst.

Sign in / Sign up

Export Citation Format

Share Document