A Playbook(trademark) for Real-Time, Closed-Loop Control

2005 ◽  
Author(s):  
Harry Funk ◽  
Robert Goldman ◽  
Christopher Miller ◽  
John Meisner ◽  
Peggy Wu
Keyword(s):  
Real Time ◽  
Closed Loop ◽  
Closed Loop Control ◽  
Loop Control

Modeling and Closed-Loop Control of Stretch Bending of Aluminum Rectangular Tubes

2003 ◽  
Vol 125 (1) ◽  
pp. 113-119 ◽  
Author(s):  
Hong Zhu ◽  
Kim A. Stelson
Keyword(s):  
Experimental Data ◽  
Real Time ◽  
Control Algorithm ◽  
Closed Loop ◽  
Strain History ◽  
Closed Loop Control ◽  
Loop Control ◽  
Stretch Bending ◽  
Rectangular Tube ◽  
Rectangular Tubes

During stretch bending, considerable springback will occur after a tube has been plastically bent. To predict the springback, a simplified two-flange model for stretch bending of a rectangular tube has been developed in which the strain history has been considered. A comparison has been made between the springback predicted by this model and experimental data, which shows rough agreement. Based on this model, a real time closed-loop control algorithm is developed.

Controlling Nylon Dyeing by Dye and Chemical Metering

1997 ◽  
Vol 67 (8) ◽  
pp. 609-616 ◽  
Author(s):  
Ralph McGregor ◽  
Manpreet S. Arora ◽  
Warren J. Jasper
Keyword(s):  
Adaptive Control ◽  
Binary Mixture ◽  
Real Time ◽  
Closed Loop ◽  
Closed Loop Control ◽  
Good Reproducibility ◽  
Acid Dyes ◽  
Loop Control ◽  
Polyamide Fibers ◽  
The Individual

Closed-loop control of the dosing of dyes and chemicals is used to obtain an on-tone build-up of shade in dyeing polyamide fibers with a binary mixture of monosulfonated acid dyes. Computerized dosing pumps control the pH, the dyebath concentrations of the individual dyes, and the total sorption of each dye during the process. This real-time, closed-loop adaptive control yields good reproducibility and uniform shade build-up in a laboratory dyeing machine. It is possible to reuse a dyebath containing residual dyes and chemicals from a previous dyeing.

scholarly journals Real-Time Low-Cost Speed Monitoring and Control of Three-Phase Induction Motor via a Voltage/Frequency Control Approach

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Ali Hmidet ◽  
Olfa Boubaker
Keyword(s):  
Real Time ◽  
Induction Motor ◽  
Closed Loop ◽  
Low Cost ◽  
Closed Loop Control ◽  
Loop Control ◽  
Control Approach ◽  
Three Phase ◽  
Wide Range ◽  
Voltage Frequency

In this paper, a new design of a real-time low-cost speed monitoring and closed-loop control of the three-phase induction motor (IM) is proposed. The proposed solution is based on a voltage/frequency (V/F) control approach and a PI antiwindup regulator. It uses the Waijung Blockset which considerably alleviates the heaviness and the difficulty of the microcontroller’s programming task incessantly crucial for the implementation and the management of such complex applications. Indeed, it automatically generates C codes for many types of microcontrollers like the STM32F4 family, also used in this application. Furthermore, it offers a cost-effective design reducing the system components and increasing its efficiency. To prove the efficiency of the suggested design, not only simulation results are carried out for a wide range of variations in load and reference speed but also experimental assessment. The real-time closed-loop control performances are proved using the aMG SQLite Data Server via the UART port board, whereas Waijung WebPage Designer (W2D) is used for the web monitoring task. Experimental results prove the accuracy and robustness of the proposed solution.

scholarly journals An Intelligent Microwave Oven with Thermal Imaging and Temperature Recommendation Using Deep Learning

2020 ◽  
Vol 3 (1) ◽  
pp. 13 ◽  
Author(s):  
Tareq Khan
Keyword(s):  
Deep Learning ◽  
Real Time ◽  
Thermal Imaging ◽  
Closed Loop ◽  
Thermal Image ◽  
Microwave Oven ◽  
Closed Loop Control ◽  
Target Temperature ◽  
Thermal Camera ◽  
Loop Control

Whenever food in a microwave oven is heated, the user estimates the time to heat. This estimation can be incorrect, leading the food to be too hot or still cold. In this research, an intelligent microwave oven is designed. After the food is put into the microwave oven and the door is closed, it captures the image of the food, classifies the image and then suggests the food’s target temperature by learning from previous experiences, so the user does not have to recall the target food temperature each time the same food is warmed. The temperature of the food is measured using a thermal camera. The proposed microwave incorporates a display to show a real-time colored thermal image of the food. The microwave automatically stops the heating when the temperature of the food hits the target temperature using closed-loop control. The deep learning-based image classifier gradually learns the type of foods that are consumed in that household and becomes smarter in temperature recommendation. The system can classify and recommend target temperature with 93% accuracy. A prototype is developed using a microcontroller-based system and successfully tested.

The Design of Reactive Power Compensation System Based on SVG for Impact Load

2013 ◽  
Vol 846-847 ◽  
pp. 180-184
Author(s):  
Shu Xi Liu ◽  
Bo Wu ◽  
Shan Li
Keyword(s):  
Real Time ◽  
Closed Loop ◽  
Reactive Power ◽  
Impact Load ◽  
Closed Loop Control ◽  
Loop Control ◽  
Instantaneous Reactive Power Theory ◽  
Reactive Current ◽  
Motor Load ◽  
Iq Method

Aimed at the disadvantage of conventional ip-iq method based on instantaneous reactive power theory, a novel algorithm is presented in this paper. The detection of reactive current is obtained by voltage and current double closed-loop control based on ip-iq instantaneous value. The method is faced to impact load such as motor load increasing or decreasing suddenly. The good of using closed-loop is to make the load current follow the current issued by SVG in real time. That is to say the real-time following of reactive current is implemented. Simulation results verify the validity of the presented algorithm in the paper.

Sign in / Sign up

Export Citation Format

Share Document