scholarly journals Study of elution characteristics of anti-tuberculosis drugs mixed with bone cement

2021 ◽  
Vol 99 (4) ◽  
pp. 30-35
Author(s):  
E. O. Peretsmanas ◽  
A. A. Аrtyukhov ◽  
M. I. Shtilman ◽  
I. V. Esin ◽  
V. S. Zubikov ◽  
...  

The objective: to assess the elution characteristics of anti-tuberculosis drugs (isoniazid, cycloserine, rifampicin, amikacin, kanamycin, ethambutol) placed into bone cement samples and put in a liquid medium to determine the possibility of using such systems as a drug reservoir.Subjects and methods. For in vitro studies, pure substances of the drugs were used. The spectrophotometry was used to study the elution kinetics of the drugs. Absorption spectra of the drugs in the visible and ultraviolet regions were analyzed to reveal the absorption maxima, and the resistance of the chemical structure of the drugs to heating was assessed. Further, the changes of drug release from hardened bone cement samples under static conditions were studied.Results. It has been found that studied drugs demonstrated satisfactory parameters of thermal stability and elution which makes it possible to use them in a mixture with bone cement.

2021 ◽  
Vol Publish Ahead of Print ◽  
Author(s):  
Ashley E. Levack ◽  
Kathleen Turajane ◽  
Xu Yang ◽  
Andy O. Miller ◽  
Alberto V. Carli ◽  
...  

2021 ◽  
Vol 7 (1) ◽  
pp. 35-38
Author(s):  
Sudipta Das ◽  
Arnab Samanta ◽  
Koushik Bankura ◽  
Debatri Roy ◽  
Amit Nayak

The present work is focused on the preparation and in vitro release kinetics of liposomal formulation of Leuprolide Acetate. In this work, “Thin Lipid Film Hydration Method” was used for preparation of Leuprolide Acetate loaded liposomes. Prepared liposomal formulations of Leuprolide acetate was evaluated by drug entrapment study, in-vitro drug release kinetics and stability studies. The percentage drug entrapment of Leuprolide acetate for F1 and F2 formulations were found to be 78.14 ± 0.67 and 66.70 ± 0.81% respectively. In-vitro drug release study of liposomal formulations had shown zero order release pattern. Regression co-efficient (R2) value of Zero order kinetics for F1 and F2 formulations were 0.9912 and 0.9676 respectively. After storing formulations for 1 month, stability testing was done at 40C.It was found that all batches were stable. These liposomal formulations of Leuprolide acetate can be formulated for parenteral application to treat prostate cancer and in women, to treat symptoms of endometriosis (overgrowth of uterine lining outside of the uterus) or uterine fibroids.


2018 ◽  
Vol 37 (1) ◽  
pp. 33-37
Author(s):  
Tie-Lei Tian ◽  
Yu-Zhu Zhang ◽  
Hong-wei Xing ◽  
Jie Li ◽  
Zun-Qian Zhang

AbstractThe chemical structure of mineral wool fiber was investigated by using Fourier Transform Infrared Spectroscopy (FTIR). Next, the glass transition temperature and the crystallization temperature of the fibers were studied. Finally, the crystallization kinetics of fiber was studied. The results show that the chemical bond structure of fibers gets more random with the increase of acidity coefficient. The crystallization phases of the fibers are mainly melilites, and also a few anorthites and diopsides. The growth mechanism of the crystals is three dimensional. The fibers with acidity coefficient of 1.2 exhibit the best thermal stability and is hard to crystallize as it has the maximum aviation energy of crystallization kinetics.


2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Susan D’Souza ◽  
Jabar A. Faraj ◽  
Patrick P. DeLuca

This study explores the mechanistic aspects of in vitro release from biodegradable microspheres with the objective of understanding the effect of the unstirred water layer on polymer degradation and drug release. In vitro drug release experiments on Leuprolide PLGA microspheres were performed under “static” and “continuous” agitation conditions using the “sample and separate” method. At specified time intervals, polymer degradation, mass loss, and drug release were assessed. While molecular weight and molecular number profiles for “static” and “continuous” samples were indistinct, mass loss occurred at a faster rate in “continuous” samples than under “static” conditions. In vitro results describe a fourfold difference in drug release rates between the “continuous” and “static” samples, ascribed to the acceleration of various processes governing release, including elimination of the boundary layer. The findings were confirmed by the fourfold increase in drug release rate when “static” samples were subjected to “continuous” agitation after 11 days. A schema was proposed to describe the complex in vitro release process from biodegradable polymer-drug dosage forms. These experiments highlight the manner in which the unstirred water layer influences drug release from biodegradable microspheres and stress the importance of selecting appropriate conditions for agitation during an in vitro release study.


2011 ◽  
Vol 399-401 ◽  
pp. 1067-1070
Author(s):  
Chun Yan Li ◽  
Cong Cong Hu ◽  
Zhi Guo Wen ◽  
Sheng Xiong Dong

The method of high performance liquid chromatography (HPLC) is established to determine the content of antibacterial agent — ciprofloxacin (CF) in the degradation solution of ciprofloxacin-polyurethane (CFPU) and investigate the in vitro degradation kinetics by plotting and fitting the cumulative release curves to inspect the effects of different medium and different concentrations on drug release. The results showed that the HPLC method is accurate, reliable and simple. The drug-release of CFPU was bioresponsive and could be accorded with first order kinetics. It was observed that CF was released from CFPU by a combination of diffusion and erosion mechanism, mainly in the manner of diffusion in the absence of infection while erosion mechanism in the presence of infection.


1996 ◽  
Vol 85 (3) ◽  
pp. 635-643. ◽  
Author(s):  
Jeffrey J. Mowat ◽  
Miranda J. Mok ◽  
Bernard A. MacLeod ◽  
Thomas D. Madden

Background There is a clinical requirement for longer-acting local anesthetics, particularly for the management of post-operative and chronic pain. In this regard, liposomes have been suggested to represent a potentially useful vehicle for sustained drug release after local administration. In the current study, the authors used a transmembrane pH gradient to efficiently encapsulate bupivacaine within large unilamellar vesicles. They report on the kinetics of drug uptake and release and the duration of nerve blockade. Methods The rate and extent of bupivacaine uptake into large unilamellar vesicles that exhibit a pH gradient (interior acidic) were determined and compared to drug association with control liposomes that did not exhibit a proton gradient. In subsequent studies, researchers examined the kinetics of bupivacaine release from these liposome systems in vitro. Using the guinea pig cutaneous wheal model, the rate of clearance of the liposome carrier was monitored after intradermal administration, using a radiolabelled lipid marker, and the duration of nerve blockade produced by free and liposomal bupivacaine was compared. Results Bupivacaine was rapidly and efficiently accumulated within liposomes that exhibited a pH gradient (interior acidic) with trapping efficiencies of 64-82% of total drug, depending on the initial bupivacaine:phospholipid ratio. Little uptake was seen, however, for control vesicles that did not exhibit a transmembrane proton gradient. Using an in vitro model of drug clearance, liposomally encapsulated bupivacaine was found to be slowly released for a longer period of time compared with either the free drug or bupivacaine associated with control (no pH gradient liposomes). In the guinea pig cutaneous wheal model, more than 85% of the liposomal carrier was found to remain at the site of administration for 2 days. The sustained drug release afforded by liposomes that exhibited a pH gradient resulted in an increase in the duration of nerve blockade of as much as threefold compared with either the free drug or bupivacaine in the presence of control (no pH gradient) liposomes. Recovery of half maximal response (R2.5) after administration of 0.75% free bupivacaine, for example, was approximately 2 h, whereas the same dose of bupivacaine in pH gradient liposomes exhibited a R2.5 of approximately 6.5 h. Conclusions Large unilamellar vesicles that exhibit a pH gradient can efficiently encapsulate bupivacaine and subsequently provide a sustained-release system that greatly increases the duration of neural blockade.


Author(s):  
Adil Patel ◽  
Ami Kalsariya ◽  
Srushti Patel ◽  
Chandni Patel ◽  
Shreya Patel

The aim of present work is to determine and analyse the kinetics of drug release from the fast dissolving sublingual by employing various mathematical models. A study was done with Cyanocobalamine fast dissolving sublingual films, 1.5 mg/film by employing solvent casting technique using dehydrated banana starch and Gelatin. The in-vitro drug release profile was carried out in pH 6.8 phosphate buffer (900 mL) using USP dissolution apparatus I (Basket) at 50 rpm for 20 mins. The drug release data was obtained, quantitatively correlated and interpreted with various mathematical models viz. Zero order model, first order model, Higuchi model, Hixson-Crowell model and Korsmeyer-Peppas model and evaluated to understand the kinetics of drug release. The criterion for the most suitable model was based on the high degree of coefficient of correlation of drug release profile of Cyanocobalamine fast dissolving sublingual films.


2006 ◽  
Vol 11-12 ◽  
pp. 737-740 ◽  
Author(s):  
Yuan Xiao Wang ◽  
Xiu Fen Wang ◽  
Shi Wei Song

A series of thermo-sensitive copolymers and interpenetrating network hydrogels were prepared using PNIPAAm and HEMA.The effects of the PNIPAAm/HEMA ratio on the swelling ratio ,and deswelling and reswelling kinetics of gels at different temperatures and drug release characteristics in vitro were discussed. The results showed that the copolymer and IPN hydrogels exhibited thermo-sensitive swelling characteristics. Therefore, the hydrogels may be useful in the controlled drug delivery systems.


Sign in / Sign up

Export Citation Format

Share Document