Compositional variation and timing of aluminum phosphate-sulfate minerals in the basement rocks along the P2 fault and in association with the McArthur River uranium deposit, Athabasca Basin, Saskatchewan, Canada

2015 ◽  
Vol 100 (7) ◽  
pp. 1386-1399 ◽  
Author(s):  
Erin E. Adlakha ◽  
Keiko Hattori
Keyword(s):  
Uranium Deposit ◽  
Aluminum Phosphate ◽  
Compositional Variation ◽  
Athabasca Basin ◽  
Sulfate Minerals ◽  
Basement Rocks

Geological environment of the Cigar Lake uranium deposit

1993 ◽  
Vol 30 (4) ◽  
pp. 653-673 ◽  
Author(s):  
P. Bruneton
Keyword(s):  
Uranium Deposit ◽  
Transitional Zone ◽  
Uranium Deposits ◽  
Athabasca Basin ◽  
Structural Framework ◽  
Basement Rocks ◽  
Metamorphic Basement ◽  
Basement Ridge ◽  
Archean Basement ◽  
East West

The Cigar Lake uranium deposit occurs within the Athabasca Basin of northern Saskatchewan, Canada. Like other major uranium deposits of the basin, it is located at the unconformity separating Helikian sandstones of the Athabasca Group from Aphebian metasediments and plutonic rocks of the Wollaston Group. The Athabasca Group was deposited in an intra-continental sedimentary basin that was filled by fluviatile terrestrial quartz sandstones and conglomerates. The group appears undeformed and its actual maximum thickness is about 1500 m. On the eastern side of the basin, the detrital units correspond to the Manitou Falls Formations where most of the uranium deposits are located. The Lower Pelitic unit of the Wollaston Group, which lies directly on the Archean basement, is considered to be the most favourable horizon for uranium mineralization. During the Hudsonian orogeny (1800–1900 Ma), the group underwent polyphase deformation and upper amphibolite facies metamorphism. The Hudsonian orogeny was followed by a long period of erosion and weathering and the development of a paleoweathering profile.On the Waterbury Lake property, the Manitou Falls Formation is 250–500 m thick and corresponds to units MFd, MFc, and MFb. The conglomeratic MFb unit hosts the Cigar Lake deposit. However, the basal conglomerate is absent at the deposit, wedging out against an east–west, 20 m high, pre-Athabasca basement ridge, on top of which is located the orebody.Two major lithostructural domains are present in the metamorphic basement of the property: (1) a southern area composed mainly of pelitic metasediments (Wollaston Domain) and (2) a northern area with large lensoid granitic domes (Mudjatik Domain). The Cigar Lake east–west pelitic basin, which contains the deposit, is located in the transitional zone between the two domains. The metamorphic basement rocks in the basin consist mainly of graphitic metapelitic gneisses and calcsilicate gneisses, which are inferred to be part of the Lower Pelitic unit. Graphite- and pyrite-rich "augen gneisses," an unusual facies within the graphitic metapelitic gneisses, occur primarily below the Cigar Lake orebody.The mineralogy and geochemistry of the graphitic metapelitic gneisses suggest that they were originally shales. The abundance of magnesium in the intercalated carbonates layers indicates an evaporitic origin.The structural framework is dominated by large northeast–southwest lineaments and wide east–west mylonitic corridors. These mylonites, which contain the augen gneisses, are considered to be the most favourable features for the concentration of uranium mineralization.Despite the presence of the orebody, large areas of the Waterbury Lake property remain totally unexplored and open for new discoveries.

Significance of aluminum phosphate-sulfate minerals associated with U unconformity-type deposits: The Athabasca basin, Canada

2007 ◽  
Vol 92 (2-3) ◽  
pp. 267-280 ◽  
Author(s):  
S. Gaboreau ◽  
M. Cuney ◽  
D. Quirt ◽  
D. Beaufort ◽  
P. Patrier ◽  
...  
Keyword(s):  
Aluminum Phosphate ◽  
Athabasca Basin ◽  
Sulfate Minerals

scholarly journals Paragenetic and petrographic study of uranium mineralization along the Midwest Trend, Northeastern Athabasca Basin

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Daniel Peter Ferguson ◽  
Guoxiang Chi ◽  
Charles Normand ◽  
Patrick Ledru ◽  
Odile Maufrais-Smith
Keyword(s):  
Mineral Resource ◽  
Genetic Model ◽  
Uranium Deposit ◽  
Current Model ◽  
Uranium Mineralization ◽  
Mining District ◽  
Uranium Deposits ◽  
Athabasca Basin ◽  
Technical Report ◽  
Petrographic Study

The Athabasca Basin in northern Saskatchewan is host to many world-class uranium deposits associated with the unconformity between the Paleoproterozoic sandstone of the basin and the underlying crystalline basement (Jefferson et al., 2007).  While the style and tonnage of these deposits vary, the current genetic model for unconformity-related uranium deposits has been a practical tool for exploration in the Athabasca Basin. However, the factors which control the location and formation of these deposits is still not fully understood. A paragenetic and petrographic study of mineralization along the Midwest Trend, located on the northeastern margin of the Athabasca Basin, aims to refine the current model and to address the general problem: What are the factors which control mineralization and non-mineralization? The Midwest Trend will be used as a "modèle réduit" for uranium mineralization, as it displays many features characteristic of unconformity type deposits. The Midwest Trend comprises three mineral leases that encompass two uranium deposits, the Midwest Main and Midwest A (Allen et al., 2017a, b). Mineralization occurs along a NE-trending graphitic structure, and is hosted by the sandstone, at the unconformity, and in much lesser amounts in the underlying basement rocks. Petrographic observations aided by the use of RAMAN spectroscopy and SEM-EDS, have been used to create a paragenetic sequence of mineralization (Fig.1). Future work will focus on fluid inclusion studies using microthermometry, LA-ICP-MS, and mass spectrometry of contained gases. References:Allen, T., Quirt, D., Masset, O. (2017a). Midwest A Uranium Deposit, Midwest Property, Northern Mining District, Saskatchewan, NTS Map Area 741/8: 2017 Mineral Resource Technical Report. AREVA Resources Canada Inc. Internal Report No. 17-CND-33-01. Allen, T., Quirt, D., Masset, O. (2017b). Midwest Main Uranium Deposit, Midwest Property, Northern Mining District, Saskatchewan, NTS Map Area 741/8: 2017 Mineral Resource Technical Report. AREVA Resources Canada Inc. Internal Report No. 17-CND-33-01. Jefferson, C.W., Thomas, D.J., Gandhi, S.S., Ramaekers, P., Delaney, G., Brisbin, D., Cutts, C., Portella, P., and Olson, R.A., 2007: Unconformity-associated uranium deposits of the Athabasca Basin, Saskatchewan and Alberta. Geological Survey of Canada, Bulletin 588, p. 23–67.

Geology, Structural Analysis, and Paragenesis of the Arrow Uranium Deposit, Western Athabasca Basin, Saskatchewan, Canada: Implications for the Development of the Patterson Lake Corridor

2020 ◽  
Author(s):  
Sean Hillacre ◽  
Kevin Ansdell ◽  
Brian McEwan
Keyword(s):  
Structural Analysis ◽  
Uranium Deposit ◽  
Regional Scale ◽  
Structural Features ◽  
White Mica ◽  
Uranium Mineralization ◽  
Fault System ◽  
Thin Sections ◽  
Athabasca Basin ◽  
Quartz Veins

Abstract Recent significant discoveries of uranium mineralization in the southwestern Athabasca basin, northern Saskatchewan, Canada, have been associated with a series of geophysical conductors along a NE- to SW-trending structural zone, termed the Patterson Lake corridor. The Arrow deposit (indicated mineral resource: 256.6 Mlb U3O8; grade 4.03% U3O8) is along this trend, hosted exclusively in basement orthogneisses of the Taltson domain, and is the largest undeveloped uranium deposit in the basin. This study is the first detailed analysis of a deposit along this corridor and examines the relationships between the ductile framework and brittle reactivation of structures, mineral paragenesis, and uranium mineralization. Paragenetic information from hundreds of drill core samples and thin sections was integrated with structural analysis utilizing over 18,000 measurements of various structural features. The structural system at Arrow is interpreted as a partitioned, strike-slip–dominated, brittle-ductile fault system of complex Riedel-style geometry. The system developed along subvertical, NE- to SW-trending dextral high-strain zones formed syn- to post-D3 deformation, which were the focus of extensive premineralization metasomatism (quartz flooding, sericitization, chloritization), within the limb domain of a regional-scale fold structure. These zones evolved through post-Athabasca dextral and sinistral reactivation events, creating brittle fault linkages and dilation zones, allowing for hydrothermal fluid migration and resulting uraninite precipitation and associated alteration (white mica, chlorite, kaolinite, hematite, quartz veins). This study of the structural context of Arrow is important as it emphasizes that protracted reactivation of deep-seated structures and their subsidiaries was a fundamental control on uranium mineralization in the southwestern Athabasca basin.

U–Pb geochronology of minerals from the Midwest uranium deposit, northern Saskatchewan

1984 ◽  
Vol 21 (6) ◽  
pp. 642-648 ◽  
Author(s):  
H. Baadsgaard ◽  
G. L. Cummino ◽  
J. M. Worden
Keyword(s):  
First Generation ◽  
Second Generation ◽  
Uranium Deposit ◽  
Paragenetic Sequence ◽  
Secondary Material ◽  
Basement Rocks ◽  
Northern Saskatchewan ◽  
Host Rocks ◽  
Sampling Problems ◽  
Late Stages

Analyses of U/Pb ratios in 30 microsamples of pitchblende and coffinite from the Midwest uranium deposit in northern Saskatchewan, as well as two altered zircons from host rocks, indicate an age of mineralization for primary pitchblende of 1328 ± 17 Ma. The primary material was remobilized at 1110 ± 28 Ma, forming the second generation of pitchblende and coffinite. First-generation pitchblende appears to have lost Pb either by diffusion or by a series of episodic losses at 300–100 Ma, whereas the secondary material proved more susceptible to Pb loss in the recent past.There is evidence of migration of pitchblende downwards into the basement rocks under the deposit at least as recently as 700 Ma ago, but we have been unable to date with certainty any late stages in the paragenetic sequence because of sampling problems associated with the small size of material clearly identifiable as stage 3 or 4 of the paragenetic sequence of Wray et al.

The origin of Ti-oxide minerals below and within the eastern Athabasca Basin, Canada

2020 ◽  
Vol 105 (12) ◽  
pp. 1875-1888
Author(s):  
Erin E. Adlakha ◽  
Keiko Hattori ◽  
Mitchell J. Kerr ◽  
Brandon M. Boucher
Keyword(s):  
Regional Metamorphism ◽  
Hydrothermal Activity ◽  
Geological History ◽  
Epma Data ◽  
Athabasca Basin ◽  
Basement Rocks ◽  
History Of ◽  
Oxide Minerals ◽  
High Concentrations ◽  
Late Diagenesis

Abstract Titanium oxide minerals along the P2 fault in the eastern Athabasca Basin are characterized to constrain their origin and the geological history of the area. Two types of rutile are recognized in the basement rocks. Early rutile is disseminated in graphitic metapelite and quartzite, and it formed during regional metamorphism and post-metamorphic hydrothermal activity. Late rutile occurs as a needle-like alteration product of mica and likely formed during retrogression of the basement. In graphitic metapelite, early rutile commonly occurs with an assemblage of oxy-dravite, quartz, graphite, zircon, pyrite, biotite, and muscovite. In quartzite, rutile occurs with quartz, sillimanite, muscovite, and zircon. Metamorphic rutile is characterized by high Nb/Ta ratios (up to 47) with high concentrations of U (up to 126 ppm) and V4+ (up to 1.44 wt%; V valance calculated from EPMA data). Hydrothermal rutile contains distinctly low Nb/Ta (as low as 4.80) with high Ta (≤3050 ppm), and relatively low V (as V 3+; as low as 0.02 wt%) and U (as low as 9.06 ppm), reflecting fluids in reduced oxidation conditions. Anatase forms small anhedral (rarely coarse and euhedral) grains in the basal sandstones and altered basement rocks. In sandstones, anatase occurs with the late diagenetic mineral assemblage, whereas in basement rocks it commonly occurs with the clay-sized minerals related to uranium mineralization. In both rocks, anatase likely formed through the dissolution of rutile and/or other Ti-bearing minerals. Anatase is characterized by variably high Fe (up to 0.99 wt%; possibly contributed by hematite micro-or nanoinclusions) and U (up to 180 ppm). The mineral assemblages and composition of anatase suggest its protracted crystallization from relatively low temperature, oxidizing, acidic, uraniferous fluids of the sandstones during late diagenesis and hydrothermal activity. Therefore, the occurrence of anatase records the incursion of basin fluids into the basement, and the interaction of basement rocks with fluids responsible for the formation of the McArthur River uranium deposit. The results of this study confirm that Ti-oxides are useful in unraveling the geological history of an area that underwent prolonged hydrothermal activity.

Sign in / Sign up

Export Citation Format

Share Document