Influence of Molarity on Flexure Behaviour in Geopolymer Concrete Beams

2019 ◽  
Author(s):  
Dr. G. Narayana ◽  
Naveena M. P. ◽  
Ravichandra R. ◽  
P. Ramachandra
Author(s):  
Indrayani Indrayani ◽  
Lina Flaviana Tilik ◽  
Djaka Suhirkam ◽  
Suhadi Suhadi ◽  
Muhammad Prawira Wardana ◽  
...  

Currently, innovation continues to be developed to replace cement with other materials so that the use of cement as a building material can be reduced. Utilization of coal waste (fly ash) is an alternative to subtitude cement. From previous studies, fly ash mixed with alkaline materials in the form of NaOH and Na2SiO3 in a ratio of 1:5 can produce geopolymer concrete. This geopolymer concrete research was continued by adding bendrat wire fibers into the geopolymer concrete mixture. The method used in testing the aggregate, testing the compressive strength of normal concrete K225, testing the flexural strength of normal concrete and geopolymer concrete refers to SNI. Another additional material that is mixed is bendrat wire fiber. The research was carried out in the form of making flexible beams of 10 cm x 10 cm x 50 cm with fiber variations of 0%, 0.5%, and 1,0% at the age of 14 and 28 days. The results of the flexural strength test of the BN beam at the age of 28 days can withstand loads than BG. The average flexural strength obtained with variations of BN, BN+SB 0.5% and BN+SB 1.0% respectively were 2.796 MPa, 3.113 MPa, and 3.879 MPa. The results of testing the average flexural strength of geopolymer concrete beams at 28 days, obtained variations of BG, BG+SB 0.5%, and BG+SB 1.0% respectively were 0 MPa, 0.055 MPa and 0.104 MPa. In addition, geopolymer concrete cannot be used as a beam and the addition of bendrat wire fiber to geopolymer concrete cannot withstand the tensile load on the concrete.


2022 ◽  
Vol 1048 ◽  
pp. 333-344
Author(s):  
K. Kumar Arun ◽  
M. Muthukannan ◽  
R. Raja Abinaya ◽  
A. Kumar Suresh

On the demand of reducing the global warming due to cement production which is used as main constituent in the production of concrete and minimizing the environmental impact caused by the waste and its disposal methods, this study was aimed. This study looked in to detail insight view on effective utilization of waste wood ash in the production of geopolymer concrete beams and columns to alternate the conventional reinforced concrete elements in construction industry. Waste wood ash is a waste by product produced in the nearby hotel and factories by burning the waste wood collected from timber industries and the ash are thrown in to land which creates a major environmental pollution. Geopolymer is a novel inorganic eco-friendly binding agent derived from alkaline solution that stimulates aluminosilicate source material (such as metakaolin, fly ash and GGBS). In this research, behaviour of beams in deflection, ductility factor, flexural strength and toughness index and columns in load carrying ability, stress strain behaviour and load-deflection behaviours were examined for three types of concretes (30% WWA – 70% Fly ash Geo-polymer concrete, Fly ash Geo-polymer concrete and Reinforced Cement Concrete). The results showed that inclusion of waste wood ash in geopolymer concrete helped in enhancing the load carrying capacity of beam and column by 42% and 28%. Further, the behaviour of structural elements in stiffness, ductility and toughness were also improved with the replacement of waste wood ash.


Structures ◽  
2019 ◽  
Vol 19 ◽  
pp. 394-410 ◽  
Author(s):  
Mohammed Haloob Al-Majidi ◽  
Andreas P. Lampropoulos ◽  
Andrew B. Cundy ◽  
Ourania T. Tsioulou ◽  
Salam Alrekabi

2020 ◽  
Vol 184 ◽  
pp. 01095
Author(s):  
T Srinivas. ◽  
G Abhignya. ◽  
N.V Ramana Rao.

In present day scenario, concrete construction is rapidly increasing for different uses and aspects irrespective of the economy and its usage. Due to this imbalanced usage of economy, scarcity of raw materials increasing day by day and environment is getting affected due to manufacturing of cement. This study has been done how to reduce environmental pollution by using different kind of bi product materials in replacement to conventional concrete, which is made up of OPC. The cement can be replaced with fly ash; GGBS, rice husk ash etc, aggregates are being partially replaced with recycled aggregates which come from demolished structures and alkaline liquids such as sodium silicates and sodium hydroxide can be used in concrete, which is called geopolymer concrete. Literature review has been carried out to find the optimum content of aggregates to be replaced and the flexure behavior of the beams is being evaluated. From the literature study, it has been identified that the optimum compressive strength is achieved at 30% replacement of recycled aggregate and ductility natures of both Geopolymer and conventional concrete beams are almost similar.


Structures ◽  
2019 ◽  
Vol 20 ◽  
pp. 560-569 ◽  
Author(s):  
P. Saranya ◽  
Praveen Nagarajan ◽  
A.P. Shashikala

2013 ◽  
Vol 65 (5) ◽  
pp. 308-318 ◽  
Author(s):  
Tian Sing Ng ◽  
Ali Amin ◽  
Stephen J. Foster

2019 ◽  
Vol 182 ◽  
pp. 141-152 ◽  
Author(s):  
G.B. Maranan ◽  
A.C. Manalo ◽  
B. Benmokrane ◽  
W. Karunasena ◽  
P. Mendis ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document